pcmcia: replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/pcmcia/au1000_db1x00.c

@@ -194,7 +194,7 @@ db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_s
 				default:
 					pwr |= SET_VCC_VPP(0,0,sock);
 					printk("%s: bad Vcc/Vpp (%d:%d)\n",
-							__FUNCTION__,
+							__func__,
 							state->Vcc,
 							state->Vpp);
 					break;
@@ -215,7 +215,7 @@ db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_s
 				default:
 					pwr |= SET_VCC_VPP(0,0,sock);
 					printk("%s: bad Vcc/Vpp (%d:%d)\n",
-							__FUNCTION__,
+							__func__,
 							state->Vcc,
 							state->Vpp);
 					break;
@@ -224,7 +224,7 @@ db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_s
 		default: /* what's this ? */
 			pwr |= SET_VCC_VPP(0,0,sock);
 			printk(KERN_ERR "%s: bad Vcc %d\n",
-					__FUNCTION__, state->Vcc);
+					__func__, state->Vcc);
 			break;
 	}
 

drivers/pcmcia/au1000_pb1x00.c

@@ -244,7 +244,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
 					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
 							configure->sock);
 					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__FUNCTION__, 
+							__func__,
 							configure->vcc, 
 							configure->vpp);
 					break;
@@ -272,7 +272,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
 					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
 							configure->sock);
 					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__FUNCTION__, 
+							__func__,
 							configure->vcc, 
 							configure->vpp);
 					break;
@@ -300,7 +300,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
 					pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
 							configure->sock);
 					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__FUNCTION__, 
+							__func__,
 							configure->vcc, 
 							configure->vpp);
 					break;
@@ -309,7 +309,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
 		default: /* what's this ? */
 			pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock);
 			printk(KERN_ERR "%s: bad Vcc %d\n", 
-					__FUNCTION__, configure->vcc);
+					__func__, configure->vcc);
 			break;
 	}
 
@@ -353,7 +353,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
 				default:
 					pcr |= SET_VCC_VPP(0,0);
 					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__FUNCTION__, 
+							__func__,
 							configure->vcc, 
 							configure->vpp);
 					break;
@@ -374,7 +374,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
 				default:
 					pcr |= SET_VCC_VPP(0,0);
 					printk("%s: bad Vcc/Vpp (%d:%d)\n", 
-							__FUNCTION__, 
+							__func__,
 							configure->vcc, 
 							configure->vpp);
 					break;
@@ -383,7 +383,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
 		default: /* what's this ? */
 			pcr |= SET_VCC_VPP(0,0);
 			printk(KERN_ERR "%s: bad Vcc %d\n", 
-					__FUNCTION__, configure->vcc);
+					__func__, configure->vcc);
 			break;
 	}
 

drivers/pcmcia/au1000_xxs1500.c

@@ -56,7 +56,7 @@
 #define PCMCIA_IRQ		AU1000_GPIO_4
 
 #if 0
-#define DEBUG(x,args...)	printk(__FUNCTION__ ": " x,##args)
+#define DEBUG(x, args...)	printk(__func__ ": " x, ##args)
 #else
 #define DEBUG(x,args...)
 #endif

drivers/pcmcia/omap_cf.c

@@ -153,7 +153,7 @@ omap_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
 
 static int omap_cf_ss_suspend(struct pcmcia_socket *s)
 {
-	pr_debug("%s: %s\n", driver_name, __FUNCTION__);
+	pr_debug("%s: %s\n", driver_name, __func__);
 	return omap_cf_set_socket(s, &dead_socket);
 }
 

drivers/pcmcia/pxa2xx_lubbock.c

@@ -87,7 +87,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
 		default:
 			printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-			       __FUNCTION__, state->Vcc);
+			       __func__, state->Vcc);
 			ret = -1;
 		}
 
@@ -104,7 +104,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 				pa_dwr_set |= GPIO_A0;
 			else {
 				printk(KERN_ERR "%s(): unrecognized Vpp %u\n",
-				       __FUNCTION__, state->Vpp);
+				       __func__, state->Vpp);
 				ret = -1;
 				break;
 			}
@@ -128,14 +128,14 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
 		default:
 			printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-			       __FUNCTION__, state->Vcc);
+			       __func__, state->Vcc);
 			ret = -1;
 			break;
 		}
 
 		if (state->Vpp != state->Vcc && state->Vpp != 0) {
 			printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n",
-			       __FUNCTION__, state->Vpp);
+			       __func__, state->Vpp);
 			ret = -1;
 			break;
 		}

drivers/pcmcia/pxa2xx_mainstone.c

@@ -99,7 +99,7 @@ static int mst_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 	case 50: power |= MST_PCMCIA_PWR_VCC_50; break;
 	default:
 		 printk(KERN_ERR "%s(): bad Vcc %u\n",
-				 __FUNCTION__, state->Vcc);
+				 __func__, state->Vcc);
 		 ret = -1;
 	}
 
@@ -111,7 +111,7 @@ static int mst_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 			  power |= MST_PCMCIA_PWR_VPP_VCC;
 		  } else {
 			  printk(KERN_ERR "%s(): bad Vpp %u\n",
-					  __FUNCTION__, state->Vpp);
+					  __func__, state->Vpp);
 			  ret = -1;
 		  }
 	}

drivers/pcmcia/sa1100_assabet.c

@@ -66,14 +66,14 @@ assabet_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_stat
 
 	case 50:
 		printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V...\n",
-			__FUNCTION__);
+			__func__);
 
 	case 33:  /* Can only apply 3.3V to the CF slot. */
 		mask = ASSABET_BCR_CF_PWR;
 		break;
 
 	default:
-		printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __FUNCTION__,
+		printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __func__,
 			state->Vcc);
 		return -1;
 	}

drivers/pcmcia/sa1100_badge4.c

@@ -82,14 +82,14 @@ badge4_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state
 	case 0:
 		if ((state->Vcc != 0) &&
 		    (state->Vcc != badge4_pcmvcc)) {
-			complain_about_jumpering(__FUNCTION__, "pcmvcc",
+			complain_about_jumpering(__func__, "pcmvcc",
 						 badge4_pcmvcc, state->Vcc);
 			// Apply power regardless of the jumpering.
 			// return -1;
 		}
 		if ((state->Vpp != 0) &&
 		    (state->Vpp != badge4_pcmvpp)) {
-			complain_about_jumpering(__FUNCTION__, "pcmvpp",
+			complain_about_jumpering(__func__, "pcmvpp",
 						 badge4_pcmvpp, state->Vpp);
 			return -1;
 		}
@@ -98,7 +98,7 @@ badge4_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state
 	case 1:
 		if ((state->Vcc != 0) &&
 		    (state->Vcc != badge4_cfvcc)) {
-			complain_about_jumpering(__FUNCTION__, "cfvcc",
+			complain_about_jumpering(__func__, "cfvcc",
 						 badge4_cfvcc, state->Vcc);
 			return -1;
 		}
@@ -143,7 +143,7 @@ int pcmcia_badge4_init(struct device *dev)
 	if (machine_is_badge4()) {
 		printk(KERN_INFO
 		       "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
-		       __FUNCTION__,
+		       __func__,
 		       badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
 
 		ret = sa11xx_drv_pcmcia_probe(dev, &badge4_pcmcia_ops, 0, 2);

drivers/pcmcia/sa1100_cerf.c

@@ -63,7 +63,7 @@ cerf_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
 	default:
 		printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-			__FUNCTION__, state->Vcc);
+			__func__, state->Vcc);
 		return -1;
 	}
 

drivers/pcmcia/sa1100_jornada720.c

@@ -42,7 +42,7 @@ jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s
   unsigned int pa_dwr_mask, pa_dwr_set;
   int ret;
 
-printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
+printk("%s(): config socket %d vcc %d vpp %d\n", __func__,
 	skt->nr, state->Vcc, state->Vpp);
 
   switch (skt->nr) {
@@ -74,7 +74,7 @@ printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
 
   if (state->Vpp != state->Vcc && state->Vpp != 0) {
     printk(KERN_ERR "%s(): slot cannot support VPP %u\n",
-	   __FUNCTION__, state->Vpp);
+	   __func__, state->Vpp);
     return -1;
   }
 

drivers/pcmcia/sa1100_neponset.c

@@ -59,7 +59,7 @@ neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_sta
 			ncr_set = NCR_A0VPP;
 		else {
 			printk(KERN_ERR "%s(): unrecognized VPP %u\n",
-			       __FUNCTION__, state->Vpp);
+			       __func__, state->Vpp);
 			return -1;
 		}
 		break;
@@ -71,7 +71,7 @@ neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_sta
 
 		if (state->Vpp != state->Vcc && state->Vpp != 0) {
 			printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n",
-			       __FUNCTION__, state->Vpp);
+			       __func__, state->Vpp);
 			return -1;
 		}
 		break;

drivers/pcmcia/sa1100_shannon.c

@@ -73,19 +73,19 @@ shannon_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 {
 	switch (state->Vcc) {
 	case 0:	/* power off */
-		printk(KERN_WARNING "%s(): CS asked for 0V, still applying 3.3V..\n", __FUNCTION__);
+		printk(KERN_WARNING "%s(): CS asked for 0V, still applying 3.3V..\n", __func__);
 		break;
 	case 50:
-		printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V..\n", __FUNCTION__);
+		printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V..\n", __func__);
 	case 33:
 		break;
 	default:
 		printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-		       __FUNCTION__, state->Vcc);
+		       __func__, state->Vcc);
 		return -1;
 	}
 
-	printk(KERN_WARNING "%s(): Warning, Can't perform reset\n", __FUNCTION__);
+	printk(KERN_WARNING "%s(): Warning, Can't perform reset\n", __func__);
 	
 	/* Silently ignore Vpp, output enable, speaker enable. */
 

drivers/pcmcia/sa1100_simpad.c

@@ -90,7 +90,7 @@ simpad_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
 	default:
 		printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
-			__FUNCTION__, state->Vcc);
+			__func__, state->Vcc);
 		clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
 		local_irq_restore(flags);
 		return -1;

drivers/pcmcia/soc_common.c

@@ -354,7 +354,7 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m
 		(map->flags&MAP_PREFETCH)?"PREFETCH ":"");
 
 	if (map->map >= MAX_IO_WIN) {
-		printk(KERN_ERR "%s(): map (%d) out of range\n", __FUNCTION__,
+		printk(KERN_ERR "%s(): map (%d) out of range\n", __func__,
 		       map->map);
 		return -1;
 	}