Commit 2eefb20d authored by Eddie Wai's avatar Eddie Wai Committed by James Bottomley

[SCSI] bnx2i: Fixed the TCP graceful termination initiation

In compliance to RFC793, a TCP graceful termination will be used
instead of an abortive termination for the case where the remote
has initiated the close of the connection.
Additionally, a TCP abortive termination will be used to close the
connection when a logout response is not received in time after a
logout request has been initiated.
Signed-off-by: default avatarEddie Wai <eddie.wai@broadcom.com>
Reviewed-by: default avatarMichael Chan <mchan@broadcom.com>
Reviewed-by: default avatarBenjamin Li <benli@broadcom.com>
Acked-by: default avatarAnil Veerabhadrappa <anilgv@broadcom.com>
Reviewed-by: default avatarMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
parent e37d2c47
......@@ -639,6 +639,8 @@ enum {
EP_STATE_CLEANUP_CMPL = 0x800,
EP_STATE_TCP_FIN_RCVD = 0x1000,
EP_STATE_TCP_RST_RCVD = 0x2000,
EP_STATE_LOGOUT_SENT = 0x4000,
EP_STATE_LOGOUT_RESP_RCVD = 0x8000,
EP_STATE_PG_OFLD_FAILED = 0x1000000,
EP_STATE_ULP_UPDATE_FAILED = 0x2000000,
EP_STATE_CLEANUP_FAILED = 0x4000000,
......
......@@ -562,6 +562,8 @@ int bnx2i_send_iscsi_logout(struct bnx2i_conn *bnx2i_conn,
logout_wqe->num_bds = 1;
logout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
bnx2i_conn->ep->state = EP_STATE_LOGOUT_SENT;
bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
return 0;
}
......@@ -1482,6 +1484,8 @@ static int bnx2i_process_logout_resp(struct iscsi_session *session,
resp_hdr->t2retain = cpu_to_be32(logout->time_to_retain);
__iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
bnx2i_conn->ep->state = EP_STATE_LOGOUT_RESP_RCVD;
done:
spin_unlock(&session->lock);
return 0;
......
......@@ -1890,6 +1890,8 @@ static int bnx2i_ep_tcp_conn_active(struct bnx2i_endpoint *bnx2i_ep)
case EP_STATE_ULP_UPDATE_START:
case EP_STATE_ULP_UPDATE_COMPL:
case EP_STATE_TCP_FIN_RCVD:
case EP_STATE_LOGOUT_SENT:
case EP_STATE_LOGOUT_RESP_RCVD:
case EP_STATE_ULP_UPDATE_FAILED:
ret = 1;
break;
......@@ -1923,6 +1925,8 @@ int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep)
struct iscsi_session *session = NULL;
struct iscsi_conn *conn = NULL;
int ret = 0;
int close = 0;
int close_ret = 0;
if (!hba)
return 0;
......@@ -1939,33 +1943,44 @@ int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep)
session = conn->session;
}
bnx2i_ep->state = EP_STATE_DISCONN_START;
init_timer(&bnx2i_ep->ofld_timer);
bnx2i_ep->ofld_timer.expires = hba->conn_teardown_tmo + jiffies;
bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
add_timer(&bnx2i_ep->ofld_timer);
if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
int close = 0;
int close_ret = 0;
if (session) {
spin_lock_bh(&session->lock);
if (session->state == ISCSI_STATE_LOGGING_OUT)
close = 1;
spin_unlock_bh(&session->lock);
}
if (close)
close_ret = cnic->cm_close(bnx2i_ep->cm_sk);
else
close_ret = cnic->cm_abort(bnx2i_ep->cm_sk);
if (close_ret)
bnx2i_ep->state = EP_STATE_DISCONN_COMPL;
} else
if (!test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic))
goto out;
if (session) {
spin_lock_bh(&session->lock);
if (bnx2i_ep->state != EP_STATE_TCP_FIN_RCVD) {
if (session->state == ISCSI_STATE_LOGGING_OUT) {
if (bnx2i_ep->state == EP_STATE_LOGOUT_SENT) {
/* Logout sent, but no resp */
printk(KERN_ALERT "bnx2i - WARNING "
"logout response was not "
"received!\n");
} else if (bnx2i_ep->state ==
EP_STATE_LOGOUT_RESP_RCVD)
close = 1;
}
} else
close = 1;
spin_unlock_bh(&session->lock);
}
bnx2i_ep->state = EP_STATE_DISCONN_START;
if (close)
close_ret = cnic->cm_close(bnx2i_ep->cm_sk);
else
close_ret = cnic->cm_abort(bnx2i_ep->cm_sk);
if (close_ret)
bnx2i_ep->state = EP_STATE_DISCONN_COMPL;
/* wait for option-2 conn teardown */
wait_event_interruptible(bnx2i_ep->ofld_wait,
bnx2i_ep->state != EP_STATE_DISCONN_START);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment