Commit 2f6963cb authored by Marcus Cooper's avatar Marcus Cooper Committed by Mark Brown

ASoC: sunxi: compatibility for sun6i to SPDIF

The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its
reset is controlled via a separate reset controller.

The DMA also complains when the maxburst is set to 4 so it's been adjusted
to 8 which suites both the older and newer SoCs.
Signed-off-by: default avatarMarcus Cooper <codekipper@gmail.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent fbb016a2
......@@ -29,6 +29,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <sound/dmaengine_pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
......@@ -162,6 +163,7 @@ struct sun4i_spdif_dev {
struct platform_device *pdev;
struct clk *spdif_clk;
struct clk *apb_clk;
struct reset_control *rst;
struct snd_soc_dai_driver cpu_dai_drv;
struct regmap *regmap;
struct snd_dmaengine_dai_dma_data dma_params_tx;
......@@ -411,6 +413,7 @@ static const struct snd_soc_dapm_route dit_routes[] = {
static const struct of_device_id sun4i_spdif_of_match[] = {
{ .compatible = "allwinner,sun4i-a10-spdif", },
{ .compatible = "allwinner,sun6i-a31-spdif", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sun4i_spdif_of_match);
......@@ -482,11 +485,23 @@ static int sun4i_spdif_probe(struct platform_device *pdev)
}
host->dma_params_tx.addr = res->start + SUN4I_SPDIF_TXFIFO;
host->dma_params_tx.maxburst = 4;
host->dma_params_tx.maxburst = 8;
host->dma_params_tx.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
platform_set_drvdata(pdev, host);
if (of_device_is_compatible(pdev->dev.of_node,
"allwinner,sun6i-a31-spdif")) {
host->rst = devm_reset_control_get_optional(&pdev->dev, NULL);
if (IS_ERR(host->rst) && PTR_ERR(host->rst) == -EPROBE_DEFER) {
ret = -EPROBE_DEFER;
dev_err(&pdev->dev, "Failed to get reset: %d\n", ret);
goto err_disable_apb_clk;
}
if (!IS_ERR(host->rst))
reset_control_deassert(host->rst);
}
ret = devm_snd_soc_register_component(&pdev->dev,
&sun4i_spdif_component, &sun4i_spdif_dai, 1);
if (ret)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment