Merge tag 'renesas-cleanup-boot-for-v3.11' of...

Merge tag 'renesas-cleanup-boot-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

From Simon Horman:

Renesas ARM based SoC boot cleanup for v3.11

Work by Magnus Damm and others to clean up the boot of and move
things closer to supporting multi-arch.

As a side effect of this work it was decided to remove support for
two boards, Bonito and AP4EVB. Those patches are included in this
series as they depend on earlier patches in the series.

* tag 'renesas-cleanup-boot-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Remove Bonito board support
  ARM: shmobile: Remove AP4EVB board support
  ARM: shmobile: Remove mach/memory.h
  ARM: shmobile: Remove MEMORY_START/SIZE
  ARM: shmobile: Enable ARM_PATCH_PHYS_VIRT
  ARM: shmobile: Remove old SCU boot code
  ARM: shmobile: EMEV2 SMP with SCU boot fn and args
  ARM: shmobile: sh73a0 SMP with SCU boot fn and args
  ARM: shmobile: r8a7779 SMP with SCU boot fn and args
  ARM: shmobile: Add SCU boot function using argument
  ARM: shmobile: Add SMP boot function and argument
  ARM: shmobile: Rework sh7372 sleep code to use virt_to_phys()
  ARM: shmobile: Remove romImage CONFIG_MEMORY_START
  ARM: shmobile: Let romImage rely on default ATAGS
  ARM: shmobile: uImage load address rework
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -636,6 +636,7 @@ config ARCH_MSM
 
 config ARCH_SHMOBILE
 	bool "Renesas SH-Mobile / R-Mobile"
+	select ARM_PATCH_PHYS_VIRT
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
@@ -645,7 +646,6 @@ config ARCH_SHMOBILE
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select MULTI_IRQ_HANDLER
-	select NEED_MACH_MEMORY_H
 	select NO_IOPORT
 	select PINCTRL
 	select PM_GENERIC_DOMAINS if PM

arch/arm/boot/compressed/head-shmobile.S

@@ -46,7 +46,7 @@ __image_start:
 __image_end:
 	.long	_got_end
 __load_base:
-	.long	CONFIG_MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
+	.long	MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
 __loaded:
 	.long	__continue
 	.align
@@ -55,26 +55,9 @@ __tmp_stack:
 __continue:
 #endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
 
-	b	1f
-__atags:@ tag #1
-	.long	12			@ tag->hdr.size = tag_size(tag_core);
-	.long	0x54410001		@ tag->hdr.tag = ATAG_CORE;
-	.long   0			@ tag->u.core.flags = 0;
-	.long	0			@ tag->u.core.pagesize = 0;
-	.long	0			@ tag->u.core.rootdev = 0;
-	@ tag #2
-	.long	8			@ tag->hdr.size = tag_size(tag_mem32);
-	.long	0x54410002		@ tag->hdr.tag = ATAG_MEM;
-	.long	CONFIG_MEMORY_SIZE	@ tag->u.mem.size = CONFIG_MEMORY_SIZE;
-	.long	CONFIG_MEMORY_START	@ @ tag->u.mem.start = CONFIG_MEMORY_START;
-	@ tag #3
-	.long	0			@ tag->hdr.size = 0
-	.long	0			@ tag->hdr.tag = ATAG_NONE;
-1:
-
 	/* Set board ID necessary for boot */
 	ldr	r7, 1f				@ Set machine type register
-	adr	r8, __atags			@ Set atag register
+	mov	r8, #0				@ pass null pointer as atag
 	b	2f
 
 1 :	.long MACH_TYPE

arch/arm/configs/ap4evb_defconfig

-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH7372=y
-CONFIG_MACH_AP4EVB=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
-CONFIG_KEXEC=y
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_CRC32 is not set

arch/arm/configs/bonito_defconfig

-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_R8A7740=y
-CONFIG_MACH_BONITO=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC5,115200 earlyprintk=sh-sci.5,115200 ignore_loglevel"
-CONFIG_KEXEC=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_SUSPEND is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_ARM_INTEGRATOR=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_UIO=y
-CONFIG_UIO_PDRV=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_ARM_UNWIND is not set

arch/arm/mach-shmobile/Kconfig

@@ -71,27 +71,6 @@ config ARCH_EMEV2
 
 comment "SH-Mobile Board Type"
 
-config MACH_AP4EVB
-	bool "AP4EVB board"
-	depends on ARCH_SH7372
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SH_LCD_MIPI_DSI
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
-
-choice
-	prompt "AP4EVB LCD panel selection"
-	default AP4EVB_QHD
-	depends on MACH_AP4EVB
-
-config AP4EVB_QHD
-	bool "MIPI-DSI QHD (960x540)"
-
-config AP4EVB_WVGA
-	bool "Parallel WVGA (800x480)"
-
-endchoice
-
 config MACH_AG5EVM
 	bool "AG5EVM board"
 	depends on ARCH_SH73A0
@@ -118,12 +97,6 @@ config MACH_KOTA2
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
-config MACH_BONITO
-	bool "bonito board"
-	depends on ARCH_R8A7740
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
 config MACH_ARMADILLO800EVA
 	bool "Armadillo-800 EVA board"
 	depends on ARCH_R8A7740
@@ -199,37 +172,6 @@ config CPU_HAS_INTEVT
         bool
 	default y
 
-menu "Memory configuration"
-
-config MEMORY_START
-	hex "Physical memory start address"
-	default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
-				MACH_MACKEREL || MACH_BONITO || \
-				MACH_ARMADILLO800EVA || MACH_APE6EVM || \
-				MACH_LAGER
-	default "0x41000000" if MACH_KOTA2
-	default "0x00000000"
-	---help---
-	  Tweak this only when porting to a new machine which does not
-	  already have a defconfig. Changing it from the known correct
-	  value on any of the known systems will only lead to disaster.
-
-config MEMORY_SIZE
-	hex "Physical memory size"
-	default "0x80000000" if MACH_LAGER
-	default "0x40000000" if MACH_APE6EVM
-	default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
-				MACH_ARMADILLO800EVA
-	default "0x1e000000" if MACH_KOTA2
-	default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
-	default "0x04000000"
-	help
-	  This sets the default memory size assumed by your kernel. It can
-	  be overridden as normal by the 'mem=' argument on the kernel command
-	  line.
-
-endmenu
-
 menu "Timer and clock configuration"
 
 config SHMOBILE_TIMER_HZ

arch/arm/mach-shmobile/Makefile

@@ -35,12 +35,10 @@ obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
 obj-$(CONFIG_ARCH_SH73A0)	+= pm-sh73a0.o
 
 # Board objects
-obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
 obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
 obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
-obj-$(CONFIG_MACH_BONITO)	+= board-bonito.o
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_MARZEN_REFERENCE)	+= board-marzen-reference.o

arch/arm/mach-shmobile/Makefile.boot

-__ZRELADDR	:= $(shell /bin/bash -c 'printf "0x%08x" \
-		     $$[$(CONFIG_MEMORY_START) + 0x8000]')
+# per-board load address for uImage
+loadaddr-y	:=
+loadaddr-$(CONFIG_MACH_AG5EVM) += 0x40008000
+loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
+loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
+loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
+loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
+loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000
+loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
+loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
+loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
+loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
+loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
+loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
+loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000
 
+__ZRELADDR	:= $(sort $(loadaddr-y))
    zreladdr-y   += $(__ZRELADDR)
 
 # Unsupported legacy stuff

arch/arm/mach-shmobile/headsmp-scu.S

@@ -25,31 +25,24 @@
 
 	__CPUINIT
 /*
- * Reset vector for secondary CPUs.
+ * Boot code for secondary CPUs.
  *
  * First we turn on L1 cache coherency for our CPU. Then we jump to
  * shmobile_invalidate_start that invalidates the cache and hands over control
  * to the common ARM startup code.
- * This function will be mapped to address 0 by the SBAR register.
- * A normal branch is out of range here so we need a long jump. We jump to
- * the physical address as the MMU is still turned off.
  */
-	.align	12
-ENTRY(shmobile_secondary_vector_scu)
-	mrc     p15, 0, r0, c0, c0, 5	@ read MIPDR
-	and	r0, r0, #3		@ mask out cpu ID
-	lsl	r0, r0, #3		@ we will shift by cpu_id * 8 bits
-	ldr	r1, 2f
-	ldr	r1, [r1]		@ SCU base address
-	ldr	r2, [r1, #8]		@ SCU Power Status Register
+ENTRY(shmobile_boot_scu)
+					@ r0 = SCU base address
+	mrc     p15, 0, r1, c0, c0, 5	@ read MIPDR
+	and	r1, r1, #3		@ mask out cpu ID
+	lsl	r1, r1, #3		@ we will shift by cpu_id * 8 bits
+	ldr	r2, [r0, #8]		@ SCU Power Status Register
 	mov	r3, #3
-	bic	r2, r2, r3, lsl r0	@ Clear bits of our CPU (Run Mode)
-	str	r2, [r1, #8]		@ write back
+	bic	r2, r2, r3, lsl r1	@ Clear bits of our CPU (Run Mode)
+	str	r2, [r0, #8]		@ write back
 
-	ldr	pc, 1f
-1:	.long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
-2:	.long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET
-ENDPROC(shmobile_secondary_vector_scu)
+	b	shmobile_invalidate_start
+ENDPROC(shmobile_boot_scu)
 
 	.text
 	.globl	shmobile_scu_base

arch/arm/mach-shmobile/headsmp.S

@@ -27,7 +27,14 @@ ENDPROC(shmobile_invalidate_start)
  * We need _long_ jump to the physical address.
  */
 	.align  12
-ENTRY(shmobile_secondary_vector)
+ENTRY(shmobile_boot_vector)
+	ldr     r0, 2f
 	ldr     pc, 1f
-1:	.long   shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
-ENDPROC(shmobile_secondary_vector)
+ENDPROC(shmobile_boot_vector)
+
+	.globl	shmobile_boot_fn
+shmobile_boot_fn:
+1:	.space	4
+	.globl	shmobile_boot_arg
+shmobile_boot_arg:
+2:	.space	4

arch/arm/mach-shmobile/include/mach/common.h

@@ -7,8 +7,10 @@ extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 			 unsigned int mult, unsigned int div);
 struct twd_local_timer;
 extern void shmobile_setup_console(void);
-extern void shmobile_secondary_vector(void);
-extern void shmobile_secondary_vector_scu(void);
+extern void shmobile_boot_vector(void);
+extern unsigned long shmobile_boot_fn;
+extern unsigned long shmobile_boot_arg;
+extern void shmobile_boot_scu(void);
 struct clk;
 extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);

arch/arm/mach-shmobile/include/mach/head-ap4evb.txt

-LIST "partner-jet-setup.txt"
-LIST "(C) Copyright 2010 Renesas Solutions Corp"
-LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"
-
-LIST "RWT Setting"
-EW 0xE6020004, 0xA500
-EW 0xE6030004, 0xA500
-
-LIST "GPIO Setting"
-EB 0xE6051013, 0xA2
-
-LIST "CPG"
-ED 0xE61500C0, 0x00000002
-
-WAIT 1, 0xFE40009C
-
-LIST "FRQCR"
-ED 0xE6150000, 0x2D1305C3
-ED 0xE61500E0, 0x9E40358E
-ED 0xE6150004, 0x80331050
-
-WAIT 1, 0xFE40009C
-
-ED 0xE61500E4, 0x00002000
-
-WAIT 1, 0xFE40009C
-
-LIST "PLL"
-ED 0xE6150028, 0x00004000
-
-WAIT 1, 0xFE40009C
-
-ED 0xE615002C, 0x93000040
-
-WAIT 1, 0xFE40009C
-
-LIST "SUB/USBClk"
-ED 0xE6150080, 0x00000180
-
-LIST "BSC"
-ED 0xFEC10000, 0x00E0001B
-
-LIST "SBSC1"
-ED 0xFE400354, 0x01AD8000
-ED 0xFE400354, 0x01AD8001
-
-WAIT 5, 0xFE40009C
-
-ED 0xFE400008, 0xBCC90151
-ED 0xFE400040, 0x41774113
-ED 0xFE400044, 0x2712E229
-ED 0xFE400048, 0x20C18505
-ED 0xFE40004C, 0x00110209
-ED 0xFE400010, 0x00000087
-
-WAIT 30, 0xFE40009C
-
-ED 0xFE400084, 0x0000003F
-EB 0xFE500000, 0x00
-
-WAIT 5, 0xFE40009C
-
-ED 0xFE400084, 0x0000FF0A
-EB 0xFE500000, 0x00
-
-WAIT 1, 0xFE40009C
-
-ED 0xFE400084, 0x00002201
-EB 0xFE500000, 0x00
-ED 0xFE400084, 0x00000302
-EB 0xFE500000, 0x00
-EB 0xFE5C0000, 0x00
-ED 0xFE400008, 0xBCC90159
-ED 0xFE40008C, 0x88800004
-ED 0xFE400094, 0x00000004
-ED 0xFE400028, 0xA55A0032
-ED 0xFE40002C, 0xA55A000C
-ED 0xFE400020, 0xA55A2048
-ED 0xFE400008, 0xBCC90959
-
-LIST "Change CPGA setting"
-ED 0xE61500E0, 0x9E40352E
-ED 0xE6150004, 0x80331050
-
-WAIT 1, 0xFE40009C
-
-ED 0xFE400354, 0x01AD8002
-
-LIST "SCIF0 - Serial port for earlyprintk"
-EB 0xE6053098, 0xe1
-EW 0xE6C40000, 0x0000
-EB 0xE6C40004, 0x19
-EW 0xE6C40008, 0x0030

arch/arm/mach-shmobile/include/mach/memory.h

-#ifndef __ASM_MACH_MEMORY_H
-#define __ASM_MACH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET	UL(CONFIG_MEMORY_START)
-#define MEM_SIZE	UL(CONFIG_MEMORY_SIZE)
-
-#endif /* __ASM_MACH_MEMORY_H */

arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h

-#ifndef MMC_AP4EB_H
-#define MMC_AP4EB_H
-
-#define PORT185CR      (void __iomem *)0xe60520b9
-#define PORT186CR      (void __iomem *)0xe60520ba
-#define PORT187CR      (void __iomem *)0xe60520bb
-#define PORT188CR      (void __iomem *)0xe60520bc
-
-#define PORTR191_160DR (void __iomem *)0xe6056014
-
-static inline void mmc_init_progress(void)
-{
-       /* Initialise LEDS1-4
-        * registers: PORT185CR-PORT188CR (LED1-LED4 Control)
-        * value:     0x10 - enable output
-        */
-       __raw_writeb(0x10, PORT185CR);
-       __raw_writeb(0x10, PORT186CR);
-       __raw_writeb(0x10, PORT187CR);
-       __raw_writeb(0x10, PORT188CR);
-}
-
-static inline void mmc_update_progress(int n)
-{
-	__raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) |
-		     (1 << (25 + n)), PORTR191_160DR);
-}
-
-#endif /* MMC_AP4EB_H */

arch/arm/mach-shmobile/include/mach/mmc.h

@@ -7,9 +7,7 @@
  *
  **************************************************/
 
-#ifdef CONFIG_MACH_AP4EVB
-#include "mach/mmc-ap4eb.h"
-#elif defined(CONFIG_MACH_MACKEREL)
+#ifdef CONFIG_MACH_MACKEREL
 #include "mach/mmc-mackerel.h"
 #else
 #error "unsupported board."

arch/arm/mach-shmobile/include/mach/sh7372.h

@@ -75,6 +75,8 @@ extern void sh7372_intcs_resume(void);
 extern void sh7372_intca_suspend(void);
 extern void sh7372_intca_resume(void);
 
+extern unsigned long sh7372_cpu_resume;
+
 #ifdef CONFIG_PM
 extern void __init sh7372_init_pm_domains(void);
 #else

arch/arm/mach-shmobile/include/mach/zboot.h

@@ -10,11 +10,9 @@
  *
  **************************************************/
 
-#ifdef CONFIG_MACH_AP4EVB
-#define MACH_TYPE	MACH_TYPE_AP4EVB
-#include "mach/head-ap4evb.txt"
-#elif defined(CONFIG_MACH_MACKEREL)
+#ifdef CONFIG_MACH_MACKEREL
 #define MACH_TYPE	MACH_TYPE_MACKEREL
+#define MEMORY_START	0x40000000
 #include "mach/head-mackerel.txt"
 #else
 #error "unsupported board."

arch/arm/mach-shmobile/pm-sh7372.c

@@ -351,6 +351,9 @@ static void sh7372_enter_a4s_common(int pllc0_on)
 
 static void sh7372_pm_setup_smfram(void)
 {
+	/* pass physical address of cpu_resume() to assembly resume code */
+	sh7372_cpu_resume = virt_to_phys(cpu_resume);
+
 	memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100);
 }
 #else

arch/arm/mach-shmobile/sleep-sh7372.S

@@ -40,7 +40,10 @@
 	.global sh7372_resume_core_standby_sysc
 sh7372_resume_core_standby_sysc:
 	ldr     pc, 1f
-1:	.long   cpu_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET
+
+	.globl	sh7372_cpu_resume
+sh7372_cpu_resume:
+1:	.space	4
 
 #define SPDCR 0xe6180008
 

arch/arm/mach-shmobile/smp-emev2.c

@@ -40,8 +40,10 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 {
 	scu_enable(shmobile_scu_base);
 
-	/* Tell ROM loader about our vector (in headsmp-scu.S) */
-	emev2_set_boot_vector(__pa(shmobile_secondary_vector_scu));
+	/* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */
+	emev2_set_boot_vector(__pa(shmobile_boot_vector));
+	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
+	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
 	/* enable cache coherency on booting CPU */
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);

arch/arm/mach-shmobile/smp-r8a7779.c

@@ -101,8 +101,10 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
 	scu_enable(shmobile_scu_base);
 
-	/* Map the reset vector (in headsmp-scu.S) */
-	__raw_writel(__pa(shmobile_secondary_vector_scu), AVECR);
+	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
+	__raw_writel(__pa(shmobile_boot_vector), AVECR);
+	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
+	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
 	/* enable cache coherency on booting CPU */
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);

arch/arm/mach-shmobile/smp-sh73a0.c

@@ -64,9 +64,11 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 {
 	scu_enable(shmobile_scu_base);
 
-	/* Map the reset vector (in headsmp-scu.S) */
+	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
 	__raw_writel(0, APARMBAREA);      /* 4k */
-	__raw_writel(__pa(shmobile_secondary_vector_scu), SBAR);
+	__raw_writel(__pa(shmobile_boot_vector), SBAR);
+	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
+	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
 	/* enable cache coherency on booting CPU */
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);