ARM: OMAP: 4/4 Fix clock framework to use clk_enable/disable misc

This patch fixes OMAP clock framework to use clk_enable/disable
instead of clk_use/unuse as specified in include/linux/clk.h.
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/serial.c

@@ -146,7 +146,7 @@ void __init omap_serial_init(void)
 			if (IS_ERR(uart1_ck))
 				printk("Could not get uart1_ck\n");
 			else {
-				clk_use(uart1_ck);
+				clk_enable(uart1_ck);
 				if (cpu_is_omap1510())
 					clk_set_rate(uart1_ck, 12000000);
 			}
@@ -166,7 +166,7 @@ void __init omap_serial_init(void)
 			if (IS_ERR(uart2_ck))
 				printk("Could not get uart2_ck\n");
 			else {
-				clk_use(uart2_ck);
+				clk_enable(uart2_ck);
 				if (cpu_is_omap1510())
 					clk_set_rate(uart2_ck, 12000000);
 				else
@@ -188,7 +188,7 @@ void __init omap_serial_init(void)
 			if (IS_ERR(uart3_ck))
 				printk("Could not get uart3_ck\n");
 			else {
-				clk_use(uart3_ck);
+				clk_enable(uart3_ck);
 				if (cpu_is_omap1510())
 					clk_set_rate(uart3_ck, 12000000);
 			}

arch/arm/mach-omap2/serial.c

@@ -119,14 +119,14 @@ void __init omap_serial_init()
 			if (IS_ERR(uart1_ick))
 				printk("Could not get uart1_ick\n");
 			else {
-				clk_use(uart1_ick);
+				clk_enable(uart1_ick);
 			}
 
 			uart1_fck = clk_get(NULL, "uart1_fck");
 			if (IS_ERR(uart1_fck))
 				printk("Could not get uart1_fck\n");
 			else {
-				clk_use(uart1_fck);
+				clk_enable(uart1_fck);
 			}
 			break;
 		case 1:
@@ -134,14 +134,14 @@ void __init omap_serial_init()
 			if (IS_ERR(uart2_ick))
 				printk("Could not get uart2_ick\n");
 			else {
-				clk_use(uart2_ick);
+				clk_enable(uart2_ick);
 			}
 
 			uart2_fck = clk_get(NULL, "uart2_fck");
 			if (IS_ERR(uart2_fck))
 				printk("Could not get uart2_fck\n");
 			else {
-				clk_use(uart2_fck);
+				clk_enable(uart2_fck);
 			}
 			break;
 		case 2:
@@ -149,14 +149,14 @@ void __init omap_serial_init()
 			if (IS_ERR(uart3_ick))
 				printk("Could not get uart3_ick\n");
 			else {
-				clk_use(uart3_ick);
+				clk_enable(uart3_ick);
 			}
 
 			uart3_fck = clk_get(NULL, "uart3_fck");
 			if (IS_ERR(uart3_fck))
 				printk("Could not get uart3_fck\n");
 			else {
-				clk_use(uart3_fck);
+				clk_enable(uart3_fck);
 			}
 			break;
 		}

arch/arm/mach-omap2/timer-gp.c

@@ -104,7 +104,7 @@ static void __init omap2_gp_timer_init(void)
 	if (IS_ERR(sys_ck))
 		printk(KERN_ERR "Could not get sys_ck\n");
 	else {
-		clk_use(sys_ck);
+		clk_enable(sys_ck);
 		tick_period = clk_get_rate(sys_ck) / 100;
 		clk_put(sys_ck);
 	}

arch/arm/plat-omap/gpio.c

@@ -853,19 +853,19 @@ static int __init _omap_gpio_init(void)
 		if (IS_ERR(gpio_ick))
 			printk("Could not get arm_gpio_ck\n");
 		else
-			clk_use(gpio_ick);
+			clk_enable(gpio_ick);
 	}
 	if (cpu_is_omap24xx()) {
 		gpio_ick = clk_get(NULL, "gpios_ick");
 		if (IS_ERR(gpio_ick))
 			printk("Could not get gpios_ick\n");
 		else
-			clk_use(gpio_ick);
+			clk_enable(gpio_ick);
 		gpio_fck = clk_get(NULL, "gpios_fck");
 		if (IS_ERR(gpio_ick))
 			printk("Could not get gpios_fck\n");
 		else
-			clk_use(gpio_fck);
+			clk_enable(gpio_fck);
 	}
 
 #ifdef CONFIG_ARCH_OMAP15XX

arch/arm/plat-omap/mcbsp.c

@@ -190,11 +190,11 @@ static int omap_mcbsp_check(unsigned int id)
 static void omap_mcbsp_dsp_request(void)
 {
 	if (cpu_is_omap1510() || cpu_is_omap16xx()) {
-		clk_use(mcbsp_dsp_ck);
-		clk_use(mcbsp_api_ck);
+		clk_enable(mcbsp_dsp_ck);
+		clk_enable(mcbsp_api_ck);
 
 		/* enable 12MHz clock to mcbsp 1 & 3 */
-		clk_use(mcbsp_dspxor_ck);
+		clk_enable(mcbsp_dspxor_ck);
 
 		/*
 		 * DSP external peripheral reset
@@ -208,9 +208,9 @@ static void omap_mcbsp_dsp_request(void)
 static void omap_mcbsp_dsp_free(void)
 {
 	if (cpu_is_omap1510() || cpu_is_omap16xx()) {
-		clk_unuse(mcbsp_dspxor_ck);
-		clk_unuse(mcbsp_dsp_ck);
-		clk_unuse(mcbsp_api_ck);
+		clk_disable(mcbsp_dspxor_ck);
+		clk_disable(mcbsp_dsp_ck);
+		clk_disable(mcbsp_api_ck);
 	}
 }
 

arch/arm/plat-omap/ocpi.c

@@ -88,7 +88,7 @@ static int __init omap_ocpi_init(void)
 	if (IS_ERR(ocpi_ck))
 		return PTR_ERR(ocpi_ck);
 
-	clk_use(ocpi_ck);
+	clk_enable(ocpi_ck);
 	ocpi_enable();
 	printk("OMAP OCPI interconnect driver loaded\n");
 
@@ -102,7 +102,7 @@ static void __exit omap_ocpi_exit(void)
 	if (!cpu_is_omap16xx())
 		return;
 
-	clk_unuse(ocpi_ck);
+	clk_disable(ocpi_ck);
 	clk_put(ocpi_ck);
 }