Commit 310cdfa0 authored by Andrey Smirnov's avatar Andrey Smirnov Committed by Linus Walleij

pinctrl-sx150x: Move some code out of sx150x_init_hw

Move the code configuring explicit IRQ acking into a standalone function
to declutter sx150x_init_hw a bit and make that code somewhat less
repetitious.
Tested-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Acked-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: default avatarAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 9af2ca82
...@@ -924,6 +924,31 @@ static int sx150x_reset(struct sx150x_pinctrl *pctl) ...@@ -924,6 +924,31 @@ static int sx150x_reset(struct sx150x_pinctrl *pctl)
return err; return err;
} }
static int sx150x_init_misc(struct sx150x_pinctrl *pctl)
{
u8 reg, value;
switch (pctl->data->model) {
case SX150X_789:
reg = pctl->data->pri.x789.reg_misc;
value = SX150X_789_REG_MISC_AUTOCLEAR_OFF;
break;
case SX150X_456:
reg = pctl->data->pri.x456.reg_advance;
value = 0x00;
break;
case SX150X_123:
reg = pctl->data->pri.x123.reg_advance;
value = 0x00;
break;
default:
WARN(1, "Unknown chip model %d\n", pctl->data->model);
return -EINVAL;
}
return sx150x_i2c_write(pctl->client, reg, value);
}
static int sx150x_init_hw(struct sx150x_pinctrl *pctl) static int sx150x_init_hw(struct sx150x_pinctrl *pctl)
{ {
int err; int err;
...@@ -935,18 +960,7 @@ static int sx150x_init_hw(struct sx150x_pinctrl *pctl) ...@@ -935,18 +960,7 @@ static int sx150x_init_hw(struct sx150x_pinctrl *pctl)
return err; return err;
} }
if (pctl->data->model == SX150X_789) err = sx150x_init_misc(pctl);
err = sx150x_i2c_write(pctl->client,
pctl->data->pri.x789.reg_misc,
SX150X_789_REG_MISC_AUTOCLEAR_OFF);
else if (pctl->data->model == SX150X_456)
err = sx150x_i2c_write(pctl->client,
pctl->data->pri.x456.reg_advance,
0x00);
else
err = sx150x_i2c_write(pctl->client,
pctl->data->pri.x123.reg_advance,
0x00);
if (err < 0) if (err < 0)
return err; return err;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment