Merge mulgrave.(none):/home/jejb/BK/linux-2.5

into mulgrave.(none):/home/jejb/BK/scsi-misc-2.6

Documentation/scsi/scsi_mid_low_api.txt

@@ -827,6 +827,7 @@ The interface functions are listed below in alphabetical order.
 Summary:
    bios_param - fetch head, sector, cylinder info for a disk
    detect - detects HBAs this driver wants to control
+   eh_timed_out - notify the host that a command timer expired
    eh_abort_handler - abort given command
    eh_bus_reset_handler - issue SCSI bus reset
    eh_device_reset_handler - issue SCSI device reset
@@ -894,6 +895,32 @@ Details:
     int detect(struct scsi_host_template * shtp)
 
 
+/**
+ *      eh_timed_out - The timer for the command has just fired
+ *      @scp: identifies command timing out
+ *
+ *      Returns:
+ *
+ *	EH_HANDLED:		I fixed the error, please complete the command
+ *	EH_RESET_TIMER:		I need more time, reset the timer and
+ *				begin counting again
+ *	EH_NOT_HANDLED		Begin normal error recovery
+
+ *
+ *      Locks: None held
+ *
+ *      Calling context: interrupt
+ *
+ *	Notes: This is to give the LLD an opportunity to do local recovery.
+ *	This recovery is limited to determining if the outstanding command
+ *	will ever complete.  You may not abort and restart the command from
+ *	this callback.
+ *
+ *      Optionally defined in: LLD
+ **/
+     int eh_timed_out(struct scsi_cmnd * scp)
+
+
 /**
  *      eh_abort_handler - abort command associated with scp
  *      @scp: identifies command to be aborted

drivers/scsi/53c700.c

@@ -332,7 +332,7 @@ NCR_700_detect(struct scsi_host_template *tpnt,
 	tpnt->can_queue = NCR_700_COMMAND_SLOTS_PER_HOST;
 	tpnt->sg_tablesize = NCR_700_SG_SEGMENTS;
 	tpnt->cmd_per_lun = NCR_700_CMD_PER_LUN;
-	tpnt->use_clustering = DISABLE_CLUSTERING;
+	tpnt->use_clustering = ENABLE_CLUSTERING;
 	tpnt->slave_configure = NCR_700_slave_configure;
 	tpnt->slave_destroy = NCR_700_slave_destroy;
 	

drivers/scsi/aacraid/README

@@ -10,20 +10,22 @@ the original).
 
 Supported Cards/Chipsets
 -------------------------
+	AAR-2410SA SATA
+	Adaptec 2120S
+	Adaptec 2200S
+	Adaptec 2230S
+	Adaptec 3230S
+	Adaptec 3240S
+	Adaptec 5400S
+	ASR-2020S PCI-X
 	Dell PERC 2 Quad Channel
 	Dell PERC 2/Si
 	Dell PERC 3/Si
 	Dell PERC 3/Di
+	Dell CERC 2
 	HP NetRAID-4M
-	ADAPTEC 2120S
-	ADAPTEC 2200S
-	ADAPTEC 5400S
 	Legend S220
 	Legend S230
-	Adaptec 3230S
-	Adaptec 3240S
-	ASR-2020S PCI-X
-	AAR-2410SA SATA
 
 People
 -------------------------
@@ -46,7 +48,7 @@ Adaptec Unix OEM Product Group
 
 Mailing List
 -------------------------
-linux-aacraid-devel@dell.com (Interested parties troll here)
+linux-scsi@vger.kernel.org (Interested parties troll here)
 http://mbserver.adaptec.com/ (Currently more Community Support than Devel Support)
 Also note this is very different to Brian's original driver
 so don't expect him to support it.

drivers/scsi/aacraid/TODO

@@ -2,3 +2,5 @@ o	Testing
 o	More testing
 o	Feature request: display the firmware/bios/etc revisions in the
 	/proc info
+o	Drop irq_mask, basically unused
+o	I/O size increase

drivers/scsi/aacraid/aacraid.h

@@ -6,14 +6,12 @@
  *              D E F I N E S
  *----------------------------------------------------------------------------*/
 
-#define MAXIMUM_NUM_CONTAINERS	31
+#define MAXIMUM_NUM_CONTAINERS	32
 #define MAXIMUM_NUM_ADAPTERS	8
 
-#define AAC_NUM_FIB		578
-//#define AAC_NUM_IO_FIB	512
+#define AAC_NUM_FIB		(256 + 64)
 #define AAC_NUM_IO_FIB		100
 
-#define AAC_MAX_TARGET 		(MAXIMUM_NUM_CONTAINERS+1)
 #define AAC_MAX_LUN		(8)
 
 #define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff)
@@ -21,7 +19,12 @@
 /*
  * These macros convert from physical channels to virtual channels
  */
-#define CONTAINER_CHANNEL	(0)
+#define CONTAINER_CHANNEL		(0)
+#define ID_LUN_TO_CONTAINER(id, lun)	(id)
+#define CONTAINER_TO_CHANNEL(cont)	(CONTAINER_CHANNEL)
+#define CONTAINER_TO_ID(cont)		(cont)
+#define CONTAINER_TO_LUN(cont)		(0)
+
 #define aac_phys_to_logical(x)  (x+1)
 #define aac_logical_to_phys(x)  (x?x-1:0)
 
@@ -73,7 +76,7 @@ struct diskparm
 #define		FT_SOCK		6	/* socket */
 #define		FT_FIFO		7	/* fifo */
 #define		FT_FILESYS	8	/* ADAPTEC's "FSA"(tm) filesystem */
-#define		FT_DRIVE	9	/* physical disk - addressable in scsi by bus/target/lun */
+#define		FT_DRIVE	9	/* physical disk - addressable in scsi by bus/id/lun */
 #define		FT_SLICE	10	/* virtual disk - raw volume - slice */
 #define		FT_PARTITION	11	/* FSA partition - carved out of a slice - building block for containers */
 #define		FT_VOLUME	12	/* Container - Volume Set */
@@ -433,7 +436,7 @@ struct adapter_ops
 
 struct aac_driver_ident
 {
-	int 	(*init)(struct aac_dev *dev, unsigned long num);
+	int 	(*init)(struct aac_dev *dev);
 	char *	name;
 	char *	vname;
 	char *	model;
@@ -596,6 +599,9 @@ struct rx_inbound {
 #define	InboundMailbox2		IndexRegs.Mailbox[2]
 #define	InboundMailbox3		IndexRegs.Mailbox[3]
 #define	InboundMailbox4		IndexRegs.Mailbox[4]
+#define	InboundMailbox5		IndexRegs.Mailbox[5]
+#define	InboundMailbox6		IndexRegs.Mailbox[6]
+#define	InboundMailbox7		IndexRegs.Mailbox[7]
 
 #define	INBOUNDDOORBELL_0	cpu_to_le32(0x00000001)
 #define INBOUNDDOORBELL_1	cpu_to_le32(0x00000002)
@@ -825,9 +831,8 @@ struct aac_dev
 	} regs;
 	u32			OIMR; /* Mask Register Cache */
 	/*
-	 *	The following is the number of the individual adapter
+	 *	AIF thread states
 	 */
-	u32			devnum;
 	u32			aif_thread;
 	struct completion	aif_completion;
 	struct aac_adapter_info adapter_info;
@@ -839,19 +844,19 @@ struct aac_dev
 };
 
 #define AllocateAndMapFibSpace(dev, MapFibContext) \
-	dev->a_ops.AllocateAndMapFibSpace(dev, MapFibContext)
+	(dev)->a_ops.AllocateAndMapFibSpace(dev, MapFibContext)
 
 #define UnmapAndFreeFibSpace(dev, MapFibContext) \
-	dev->a_ops.UnmapAndFreeFibSpace(dev, MapFibContext)
+	(dev)->a_ops.UnmapAndFreeFibSpace(dev, MapFibContext)
 
 #define aac_adapter_interrupt(dev) \
-	dev->a_ops.adapter_interrupt(dev)
+	(dev)->a_ops.adapter_interrupt(dev)
 
 #define aac_adapter_notify(dev, event) \
-	dev->a_ops.adapter_notify(dev, event)
+	(dev)->a_ops.adapter_notify(dev, event)
 
 #define aac_adapter_enable_int(dev, event) \
-	dev->a_ops.adapter_enable_int(dev, event)
+	(dev)->a_ops.adapter_enable_int(dev, event)
 
 #define aac_adapter_disable_int(dev, event) \
 	dev->a_ops.adapter_disable_int(dev, event)
@@ -1023,7 +1028,7 @@ struct aac_srb
 {
 	u32		function;
 	u32		channel;
-	u32		target;
+	u32		id;
 	u32		lun;
 	u32		timeout;
 	u32		flags;
@@ -1212,7 +1217,7 @@ struct aac_query_disk
 {
 	s32	cnum;
 	s32	bus;
-	s32	target;
+	s32	id;
 	s32	lun;
 	u32	valid;
 	u32	locked;
@@ -1323,6 +1328,7 @@ extern struct aac_common aac_config;
 #define WRITE_PERMANENT_PARAMETERS	cpu_to_le32(0x0000000b)
 #define HOST_CRASHING			cpu_to_le32(0x0000000d)
 #define	SEND_SYNCHRONOUS_FIB		cpu_to_le32(0x0000000c)
+#define	COMMAND_POST_RESULTS		cpu_to_le32(0x00000014)
 #define GET_ADAPTER_PROPERTIES		cpu_to_le32(0x00000019)
 #define RE_INIT_ADAPTER			cpu_to_le32(0x000000ee)
 
@@ -1347,14 +1353,16 @@ extern struct aac_common aac_config;
  *	Phases are bit oriented.  It is NOT valid  to have multiple bits set						
  */					
 
-#define	SELF_TEST_FAILED		cpu_to_le32(0x00000004)
-#define	KERNEL_UP_AND_RUNNING		cpu_to_le32(0x00000080)
-#define	KERNEL_PANIC			cpu_to_le32(0x00000100)
+#define	SELF_TEST_FAILED		(cpu_to_le32(0x00000004))
+#define MONITOR_PANIC			(cpu_to_le32(0x00000020))
+#define	KERNEL_UP_AND_RUNNING		(cpu_to_le32(0x00000080))
+#define	KERNEL_PANIC			(cpu_to_le32(0x00000100))
 
 /*
  *	Doorbell bit defines
  */
 
+#define DoorBellSyncCmdAvailable	cpu_to_le32(1<<0)	// Host -> Adapter
 #define DoorBellPrintfDone		cpu_to_le32(1<<5)	// Host -> Adapter
 #define DoorBellAdapterNormCmdReady	cpu_to_le32(1<<1)	// Adapter -> Host
 #define DoorBellAdapterNormRespReady	cpu_to_le32(1<<2)	// Adapter -> Host
@@ -1368,9 +1376,22 @@ extern struct aac_common aac_config;
  */
  
 #define 	AifCmdEventNotify	1	/* Notify of event */
+#define			AifEnConfigChange	3	/* Adapter configuration change */
+#define			AifEnContainerChange	4	/* Container configuration change */
+#define			AifEnDeviceFailure	5	/* SCSI device failed */
+#define			AifEnAddContainer	15	/* A new array was created */
+#define			AifEnDeleteContainer	16	/* A container was deleted */
+#define			AifEnExpEvent		23	/* Firmware Event Log */
+#define			AifExeFirmwarePanic	3	/* Firmware Event Panic */
+#define			AifHighPriority		3	/* Highest Priority Event */
+
 #define		AifCmdJobProgress	2	/* Progress report */
+#define			AifJobCtrZero	101	/* Array Zero progress */
+#define			AifJobStsSuccess 1	/* Job completes */
 #define		AifCmdAPIReport		3	/* Report from other user of API */
 #define		AifCmdDriverNotify	4	/* Notify host driver of event */
+#define			AifDenMorphComplete 200	/* A morph operation completed */
+#define			AifDenVolumeExtendComplete 201 /* A volume extend completed */
 #define		AifReqJobList		100	/* Gets back complete job list */
 #define		AifReqJobsForCtr	101	/* Gets back jobs for specific container */
 #define		AifReqJobsForScsi	102	/* Gets back jobs for specific SCSI device */ 
@@ -1427,9 +1448,9 @@ int aac_get_containers(struct aac_dev *dev);
 int aac_scsi_cmd(struct scsi_cmnd *cmd);
 int aac_dev_ioctl(struct aac_dev *dev, int cmd, void *arg);
 int aac_do_ioctl(struct aac_dev * dev, int cmd, void *arg);
-int aac_rx_init(struct aac_dev *dev, unsigned long devNumber);
-int aac_rkt_init(struct aac_dev *dev, unsigned long devNumber);
-int aac_sa_init(struct aac_dev *dev, unsigned long devNumber);
+int aac_rx_init(struct aac_dev *dev);
+int aac_rkt_init(struct aac_dev *dev);
+int aac_sa_init(struct aac_dev *dev);
 unsigned int aac_response_normal(struct aac_queue * q);
 unsigned int aac_command_normal(struct aac_queue * q);
 int aac_command_thread(struct aac_dev * dev);

drivers/scsi/aacraid/commctrl.c

@@ -431,7 +431,7 @@ int aac_send_raw_srb(struct aac_dev* dev, void* arg)
 	// Fix up srb for endian and force some values
 	srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi);	// Force this
 	srbcmd->channel  = cpu_to_le32(srbcmd->channel);
-	srbcmd->target   = cpu_to_le32(srbcmd->target);
+	srbcmd->id	 = cpu_to_le32(srbcmd->id);
 	srbcmd->lun      = cpu_to_le32(srbcmd->lun);
 	srbcmd->flags    = cpu_to_le32(srbcmd->flags);
 	srbcmd->timeout  = cpu_to_le32(srbcmd->timeout);

drivers/scsi/aacraid/comminit.c

@@ -95,13 +95,18 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
 	 * with the math overloading past 32 bits, thus we must limit this
 	 * field.
 	 *
-	 * FIXME: this assumes the memory is mapped zero->n, which isnt
-	 * always true on real computers.
+	 * This assumes the memory is mapped zero->n, which isnt
+	 * always true on real computers. It also has some slight problems
+	 * with the GART on x86-64. I've btw never tried DMA from PCI space
+	 * on this platform but don't be suprised if its problematic.
 	 */
+#ifndef CONFIG_GART_IOMMU
 	if ((num_physpages << (PAGE_SHIFT - 12)) <= AAC_MAX_HOSTPHYSMEMPAGES) {
 		init->HostPhysMemPages = 
 			cpu_to_le32(num_physpages << (PAGE_SHIFT-12));
-	} else {
+	} else 
+#endif	
+	{
 		init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES);
 	}
 

drivers/scsi/aacraid/linit.c

@@ -27,7 +27,7 @@
  * Abstract: Linux Driver entry module for Adaptec RAID Array Controller
  */
 
-#define AAC_DRIVER_VERSION		"1.1.2-lk1"
+#define AAC_DRIVER_VERSION		"1.1.2-lk2"
 #define AAC_DRIVER_BUILD_DATE		__DATE__
 #define AAC_DRIVERNAME			"aacraid"
 
@@ -355,13 +355,15 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
 	struct Scsi_Host * host = dev->host;
 	struct scsi_cmnd * command;
 	int count;
+	struct aac_dev * aac;
 	unsigned long flags;
 
 	printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n", 
 					AAC_DRIVERNAME);
 
 
-	if (aac_adapter_check_health((struct aac_dev *)host->hostdata)) {
+	aac = (struct aac_dev *)host->hostdata;
+	if (aac_adapter_check_health(aac)) {
 		printk(KERN_ERR "%s: Host adapter appears dead\n", 
 				AAC_DRIVERNAME);
 		return -ENODEV;
@@ -381,15 +383,13 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
 				}
 			}
 			spin_unlock_irqrestore(&dev->list_lock, flags);
-			if (active)
-				break;
 
+			/*
+			 * We can exit If all the commands are complete
+			 */
+			if (active == 0)
+				return SUCCESS;
 		}
-		/*
-		 * We can exit If all the commands are complete
-		 */
-		if (active == 0)
-			return SUCCESS;
 		spin_unlock_irq(host->host_lock);
 		scsi_sleep(HZ);
 		spin_lock_irq(host->host_lock);
@@ -461,7 +461,11 @@ static struct scsi_host_template aac_driver_template = {
 	.this_id        		= 16,
 	.sg_tablesize   		= 16,
 	.max_sectors    		= 128,
+#if (AAC_NUM_IO_FIB > 256)
+	.cmd_per_lun			= 256,
+#else		
 	.cmd_per_lun    		= AAC_NUM_IO_FIB, 
+#endif	
 	.use_clustering			= ENABLE_CLUSTERING,
 };
 
@@ -521,7 +525,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
 	for (container = 0; container < MAXIMUM_NUM_CONTAINERS; container++)
 		fsa_dev_ptr->devname[container][0] = '\0';
 
-	if ((*aac_drivers[index].init)(aac , shost->unique_id))
+	if ((*aac_drivers[index].init)(aac))
 		goto out_free_fibs;
 
 	/*
@@ -552,7 +556,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
 	 * dmb - we may need to move the setting of these parms somewhere else once
 	 * we get a fib that can report the actual numbers
 	 */
-	shost->max_id = AAC_MAX_TARGET;
+	shost->max_id = MAXIMUM_NUM_CONTAINERS;
 	shost->max_lun = AAC_MAX_LUN;
 
 	error = scsi_add_host(shost, &pdev->dev);

drivers/scsi/aacraid/rkt.c

@@ -38,6 +38,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/completion.h>
+#include <linux/time.h>
 #include <linux/interrupt.h>
 #include <asm/semaphore.h>
 
@@ -67,8 +68,8 @@ static irqreturn_t aac_rkt_intr(int irq, void *dev_id, struct pt_regs *regs)
 			rkt_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
 		}
 		else if (bellbits & DoorBellAdapterNormCmdReady) {
-			aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
 			rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
+			aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
 		}
 		else if (bellbits & DoorBellAdapterNormRespReady) {
 			aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
@@ -305,7 +306,7 @@ static void aac_rkt_start_adapter(struct aac_dev *dev)
 	struct aac_init *init;
 
 	init = dev->init;
-	init->HostElapsedSeconds = cpu_to_le32(jiffies/HZ);
+	init->HostElapsedSeconds = cpu_to_le32(get_seconds());
 	/*
 	 *	Tell the adapter we are back and up and running so it will scan
 	 *	its command queues and enable our interrupts
@@ -341,12 +342,38 @@ static int aac_rkt_check_health(struct aac_dev *dev)
 	if (status & SELF_TEST_FAILED)
 		return -1;
 	/*
-	 *	Check to see if the board panic'd while booting.
+	 *	Check to see if the board panic'd.
 	 */
 	if (status & KERNEL_PANIC)
-		return -2;
+	{
+		char * buffer = kmalloc(512, GFP_KERNEL|__GFP_DMA);
+		struct POSTSTATUS {
+			u32 Post_Command;
+			u32 Post_Address;
+		} * post = kmalloc(sizeof(struct POSTSTATUS), GFP_KERNEL);
+		dma_addr_t paddr = pci_map_single(dev->pdev, post, sizeof(struct POSTSTATUS), 2);
+		dma_addr_t baddr = pci_map_single(dev->pdev, buffer, 512, 1);
+		u32 status = -1;
+		int ret = -2;
+		
+		memset(buffer, 0, 512);
+		post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS);
+		post->Post_Address = cpu_to_le32(baddr);
+		rkt_writel(dev, MUnit.IMRx[0], cpu_to_le32(paddr));
+		rkt_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, &status);
+		pci_unmap_single(dev->pdev, paddr, sizeof(struct POSTSTATUS),2);
+		kfree(post);
+		if ((buffer[0] == '0') && (buffer[1] == 'x')) {
+			ret = (buffer[2] <= '9') ? (buffer[2] - '0') : (buffer[2] - 'A' + 10);
+			ret <<= 4;
+			ret += (buffer[3] <= '9') ? (buffer[3] - '0') : (buffer[3] - 'A' + 10);
+		}
+		pci_unmap_single(dev->pdev, baddr, 512, 1);
+		kfree(buffer);
+		return ret;
+	}
 	/*
-	 *	Wait for the adapter to be up and running. Wait up to 3 minutes
+	 *	Wait for the adapter to be up and running.
 	 */
 	if (!(status & KERNEL_UP_AND_RUNNING))
 		return -3;
@@ -354,26 +381,24 @@ static int aac_rkt_check_health(struct aac_dev *dev)
 	 *	Everything is OK
 	 */
 	return 0;
-} /* aac_rkt_check_health */
+}
 
 /**
  *	aac_rkt_init	-	initialize an i960 based AAC card
  *	@dev: device to configure
- *	@devnum: adapter number
  *
  *	Allocate and set up resources for the i960 based AAC variants. The 
  *	device_interface in the commregion will be allocated and linked 
  *	to the comm region.
  */
 
-int aac_rkt_init(struct aac_dev *dev, unsigned long num)
+int aac_rkt_init(struct aac_dev *dev)
 {
 	unsigned long start;
 	unsigned long status;
 	int instance;
 	const char * name;
 
-	dev->devnum = num;
 	instance = dev->id;
 	name     = dev->name;
 
@@ -388,14 +413,21 @@ int aac_rkt_init(struct aac_dev *dev, unsigned long num)
 	/*
 	 *	Check to see if the board failed any self tests.
 	 */
-	if (rkt_readl(dev, IndexRegs.Mailbox[7]) & SELF_TEST_FAILED) {
+	if (rkt_readl(dev, MUnit.OMRx[0]) & SELF_TEST_FAILED) {
 		printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
 		return -1;
 	}
+	/*
+	 *	Check to see if the monitor panic'd while booting.
+	 */
+	if (rkt_readl(dev, MUnit.OMRx[0]) & MONITOR_PANIC) {
+		printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
+		return -1;
+	}
 	/*
 	 *	Check to see if the board panic'd while booting.
 	 */
-	if (rkt_readl(dev, IndexRegs.Mailbox[7]) & KERNEL_PANIC) {
+	if (rkt_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) {
 		printk(KERN_ERR "%s%d: adapter kernel panic'd.\n", dev->name, instance);
 		return -1;
 	}
@@ -403,7 +435,7 @@ int aac_rkt_init(struct aac_dev *dev, unsigned long num)
 	/*
 	 *	Wait for the adapter to be up and running. Wait up to 3 minutes
 	 */
-	while (!(rkt_readl(dev, IndexRegs.Mailbox[7]) & KERNEL_UP_AND_RUNNING)) 
+	while (!(rkt_readl(dev, MUnit.OMRx[0]) & KERNEL_UP_AND_RUNNING))
 	{
 		if(time_after(jiffies, start+180*HZ))
 		{

drivers/scsi/aacraid/rx.c

@@ -38,6 +38,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/completion.h>
+#include <linux/time.h>
 #include <linux/interrupt.h>
 #include <asm/semaphore.h>
 
@@ -67,8 +68,8 @@ static irqreturn_t aac_rx_intr(int irq, void *dev_id, struct pt_regs *regs)
 			rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
 		}
 		else if (bellbits & DoorBellAdapterNormCmdReady) {
-			aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
 			rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
+			aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
 		}
 		else if (bellbits & DoorBellAdapterNormRespReady) {
 			aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
@@ -305,7 +306,7 @@ static void aac_rx_start_adapter(struct aac_dev *dev)
 	struct aac_init *init;
 
 	init = dev->init;
-	init->HostElapsedSeconds = cpu_to_le32(jiffies/HZ);
+	init->HostElapsedSeconds = cpu_to_le32(get_seconds());
 	/*
 	 *	Tell the adapter we are back and up and running so it will scan
 	 *	its command queues and enable our interrupts
@@ -341,12 +342,36 @@ static int aac_rx_check_health(struct aac_dev *dev)
 	if (status & SELF_TEST_FAILED)
 		return -1;
 	/*
-	 *	Check to see if the board panic'd while booting.
+	 *	Check to see if the board panic'd.
 	 */
-	if (status & KERNEL_PANIC)
-		return -2;
+	if (status & KERNEL_PANIC) {
+		char * buffer = kmalloc(512, GFP_KERNEL);
+		struct POSTSTATUS {
+			u32 Post_Command;
+			u32 Post_Address;
+		} * post = kmalloc(sizeof(struct POSTSTATUS), GFP_KERNEL);
+		dma_addr_t paddr = pci_map_single(dev->pdev, post, sizeof(struct POSTSTATUS), 2);
+		dma_addr_t baddr = pci_map_single(dev->pdev, buffer, 512, 1);
+		u32 status = -1;
+		int ret = -2;
+		memset(buffer, 0, 512);
+		post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS);
+		post->Post_Address = cpu_to_le32(baddr);
+		rx_writel(dev, MUnit.IMRx[0], cpu_to_le32(paddr));
+		rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, &status);
+		pci_unmap_single(dev->pdev, paddr, sizeof(struct POSTSTATUS), 2);
+		kfree(post);
+		if ((buffer[0] == '0') && (buffer[1] == 'x')) {
+			ret = (buffer[2] <= '9') ? (buffer[2] - '0') : (buffer[2] - 'A' + 10);
+			ret <<= 4;
+			ret += (buffer[3] <= '9') ? (buffer[3] - '0') : (buffer[3] - 'A' + 10);
+		}
+		pci_unmap_single(dev->pdev, baddr, 512, 1);
+		kfree(buffer);
+		return ret;
+	}
 	/*
-	 *	Wait for the adapter to be up and running. Wait up to 3 minutes
+	 *	Wait for the adapter to be up and running.
 	 */
 	if (!(status & KERNEL_UP_AND_RUNNING))
 		return -3;
@@ -359,21 +384,19 @@ static int aac_rx_check_health(struct aac_dev *dev)
 /**
  *	aac_rx_init	-	initialize an i960 based AAC card
  *	@dev: device to configure
- *	@devnum: adapter number
  *
  *	Allocate and set up resources for the i960 based AAC variants. The 
  *	device_interface in the commregion will be allocated and linked 
  *	to the comm region.
  */
 
-int aac_rx_init(struct aac_dev *dev, unsigned long num)
+int aac_rx_init(struct aac_dev *dev)
 {
 	unsigned long start;
 	unsigned long status;
 	int instance;
 	const char * name;
 
-	dev->devnum = num;
 	instance = dev->id;
 	name     = dev->name;
 
@@ -388,22 +411,30 @@ int aac_rx_init(struct aac_dev *dev, unsigned long num)
 	/*
 	 *	Check to see if the board failed any self tests.
 	 */
-	if (rx_readl(dev, IndexRegs.Mailbox[7]) & SELF_TEST_FAILED) {
+	if (rx_readl(dev, MUnit.OMRx[0]) & SELF_TEST_FAILED) {
 		printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
 		return -1;
 	}
 	/*
 	 *	Check to see if the board panic'd while booting.
 	 */
-	if (rx_readl(dev, IndexRegs.Mailbox[7]) & KERNEL_PANIC) {
-		printk(KERN_ERR "%s%d: adapter kernel panic'd.\n", dev->name, instance);
+	if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) {
+		printk(KERN_ERR "%s%d: adapter kernel panic.\n", dev->name, instance);
+		return -1;
+	}
+	/*
+	 *	Check to see if the monitor panic'd while booting.
+	 */
+	if (rx_readl(dev, MUnit.OMRx[0]) & MONITOR_PANIC) {
+		printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
 		return -1;
 	}
 	start = jiffies;
 	/*
 	 *	Wait for the adapter to be up and running. Wait up to 3 minutes
 	 */
-	while (!(rx_readl(dev, IndexRegs.Mailbox[7]) & KERNEL_UP_AND_RUNNING)) 
+	while ((!(rx_readl(dev, IndexRegs.Mailbox[7]) & KERNEL_UP_AND_RUNNING))
+		|| (!(rx_readl(dev, MUnit.OMRx[0]) & KERNEL_UP_AND_RUNNING)))
 	{
 		if(time_after(jiffies, start+180*HZ))
 		{
@@ -435,6 +466,11 @@ int aac_rx_init(struct aac_dev *dev, unsigned long num)
 	 *	Start any kernel threads needed
 	 */
 	dev->thread_pid = kernel_thread((int (*)(void *))aac_command_thread, dev, 0);
+	if(dev->thread_pid < 0)
+	{
+		printk(KERN_ERR "aacraid: Unable to create rx thread.\n");
+		return -1;
+	}
 	/*
 	 *	Tell the adapter that all is configured, and it can start
 	 *	accepting requests

drivers/scsi/aacraid/sa.c

@@ -38,6 +38,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/completion.h>
+#include <linux/time.h>
 #include <linux/interrupt.h>
 #include <asm/semaphore.h>
 
@@ -329,27 +330,24 @@ static int aac_sa_check_health(struct aac_dev *dev)
 	 *	Everything is OK
 	 */
 	return 0;
-} /* aac_sa_check_health */
+}
 
 /**
  *	aac_sa_init	-	initialize an ARM based AAC card
  *	@dev: device to configure
- *	@devnum: adapter number
  *
  *	Allocate and set up resources for the ARM based AAC variants. The 
  *	device_interface in the commregion will be allocated and linked 
  *	to the comm region.
  */
 
-int aac_sa_init(struct aac_dev *dev, unsigned long devnum)
+int aac_sa_init(struct aac_dev *dev)
 {
 	unsigned long start;
 	unsigned long status;
 	int instance;
 	const char *name;
 
-	dev->devnum = devnum;
-
 	dprintk(("PREINST\n"));
 	instance = dev->id;
 	name     = dev->name;

drivers/scsi/scsi.c

@@ -689,8 +689,6 @@ static DEFINE_PER_CPU(struct list_head, scsi_done_q);
  */
 void scsi_done(struct scsi_cmnd *cmd)
 {
-	unsigned long flags;
-
 	/*
 	 * We don't have to worry about this one timing out any more.
 	 * If we are unable to remove the timer, then the command
@@ -701,6 +699,14 @@ void scsi_done(struct scsi_cmnd *cmd)
 	 */
 	if (!scsi_delete_timer(cmd))
 		return;
+	__scsi_done(cmd);
+}
+
+/* Private entry to scsi_done() to complete a command when the timer
+ * isn't running --- used by scsi_times_out */
+void __scsi_done(struct scsi_cmnd *cmd)
+{
+	unsigned long flags;
 
 	/*
 	 * Set the serial numbers back to zero

drivers/scsi/scsi_devinfo.c

@@ -163,7 +163,7 @@ static struct {
 	{"Medion", "Flash XL  MMC/SD", "2.6D", BLIST_FORCELUN},
 	{"MegaRAID", "LD", NULL, BLIST_FORCELUN},
 	{"MICROP", "4110", NULL, BLIST_NOTQ},
-	{"MYLEX", "DACARMRB", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
+	{"MYLEX", "DACARMRB", "*", BLIST_REPORTLUN2},
 	{"nCipher", "Fastness Crypto", NULL, BLIST_FORCELUN},
 	{"NAKAMICH", "MJ-4.8S", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
 	{"NAKAMICH", "MJ-5.16S", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
@@ -177,7 +177,7 @@ static struct {
 	{"SanDisk", "ImageMate CF-SD1", NULL, BLIST_FORCELUN},
 	{"SGI", "RAID3", "*", BLIST_SPARSELUN},
 	{"SGI", "RAID5", "*", BLIST_SPARSELUN},
-	{"SGI", "TP9100", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
+	{"SGI", "TP9100", "*", BLIST_REPORTLUN2},
 	{"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN},
 	{"SONY", "CD-ROM CDU-8001", NULL, BLIST_BORKEN},
 	{"SONY", "TSL", NULL, BLIST_FORCELUN},		/* DDS3 & DDS4 autoloaders */

drivers/scsi/scsi_error.c

@@ -162,6 +162,24 @@ int scsi_delete_timer(struct scsi_cmnd *scmd)
 void scsi_times_out(struct scsi_cmnd *scmd)
 {
 	scsi_log_completion(scmd, TIMEOUT_ERROR);
+
+	if (scmd->device->host->hostt->eh_timed_out)
+		switch (scmd->device->host->hostt->eh_timed_out(scmd)) {
+		case EH_HANDLED:
+			__scsi_done(scmd);
+			return;
+		case EH_RESET_TIMER:
+			/* This allows a single retry even of a command
+			 * with allowed == 0 */
+			if (scmd->retries++ > scmd->allowed)
+				break;
+			scsi_add_timer(scmd, scmd->timeout_per_command,
+				       scsi_times_out);
+			return;
+		case EH_NOT_HANDLED:
+			break;
+		}
+
 	if (unlikely(!scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD))) {
 		panic("Error handler thread not present at %p %p %s %d",
 		      scmd, scmd->device->host, __FILE__, __LINE__);

drivers/scsi/scsi_priv.h

@@ -82,6 +82,7 @@ extern int scsi_insert_special_req(struct scsi_request *sreq, int);
 extern void scsi_init_cmd_from_req(struct scsi_cmnd *cmd,
 		struct scsi_request *sreq);
 extern void __scsi_release_request(struct scsi_request *sreq);
+extern void __scsi_done(struct scsi_cmnd *cmd);
 #ifdef CONFIG_SCSI_LOGGING
 void scsi_log_send(struct scsi_cmnd *cmd);
 void scsi_log_completion(struct scsi_cmnd *cmd, int disposition);

include/scsi/scsi_host.h

@@ -30,6 +30,12 @@ struct scsi_transport_template;
 #define DISABLE_CLUSTERING 0
 #define ENABLE_CLUSTERING 1
 
+enum scsi_eh_timer_return {
+	EH_NOT_HANDLED,
+	EH_HANDLED,
+	EH_RESET_TIMER,
+};
+
 
 struct scsi_host_template {
 	struct module *module;
@@ -125,6 +131,20 @@ struct scsi_host_template {
 	int (* eh_bus_reset_handler)(struct scsi_cmnd *);
 	int (* eh_host_reset_handler)(struct scsi_cmnd *);
 
+	/*
+	 * This is an optional routine to notify the host that the scsi
+	 * timer just fired.  The returns tell the timer routine what to
+	 * do about this:
+	 *
+	 * EH_HANDLED:		I fixed the error, please complete the command
+	 * EH_RESET_TIMER:	I need more time, reset the timer and
+	 *			begin counting again
+	 * EH_NOT_HANDLED	Begin normal error recovery
+	 *
+	 * Status: OPTIONAL
+	 */
+	enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *);
+
 	/*
 	 * Old EH handlers, no longer used. Make them warn the user of old
 	 * drivers by using a wrong type