Commit 317a0ebe authored by Gwendal Grignou's avatar Gwendal Grignou Committed by Enric Balletbo i Serra

iio: cros_ec: Use Hertz as unit for sampling frequency

To be compliant with other sensors, set and get sensor sampling
frequency in Hz, not mHz.

Fixes: ae7b02ad ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs")
Signed-off-by: default avatarGwendal Grignou <gwendal@chromium.org>
Acked-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: default avatarEnric Balletbo i Serra <enric.balletbo@collabora.com>
parent cb875560
......@@ -253,6 +253,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
struct cros_ec_dev *ec = sensor_hub->ec;
struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
u32 ver_mask;
int frequencies[ARRAY_SIZE(state->frequencies) / 2] = { 0 };
int ret, i;
platform_set_drvdata(pdev, indio_dev);
......@@ -301,20 +302,22 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
state->calib[i].scale = MOTION_SENSE_DEFAULT_SCALE;
/* 0 is a correct value used to stop the device */
state->frequencies[0] = 0;
if (state->msg->version < 3) {
get_default_min_max_freq(state->resp->info.type,
&state->frequencies[1],
&state->frequencies[2],
&frequencies[1],
&frequencies[2],
&state->fifo_max_event_count);
} else {
state->frequencies[1] =
state->resp->info_3.min_frequency;
state->frequencies[2] =
state->resp->info_3.max_frequency;
frequencies[1] = state->resp->info_3.min_frequency;
frequencies[2] = state->resp->info_3.max_frequency;
state->fifo_max_event_count =
state->resp->info_3.fifo_max_event_count;
}
for (i = 0; i < ARRAY_SIZE(frequencies); i++) {
state->frequencies[2 * i] = frequencies[i] / 1000;
state->frequencies[2 * i + 1] =
(frequencies[i] % 1000) * 1000;
}
if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO)) {
/*
......@@ -728,7 +731,7 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
int ret;
int ret, frequency;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
......@@ -740,8 +743,10 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
if (ret)
break;
*val = st->resp->sensor_odr.ret;
ret = IIO_VAL_INT;
frequency = st->resp->sensor_odr.ret;
*val = frequency / 1000;
*val2 = (frequency % 1000) * 1000;
ret = IIO_VAL_INT_PLUS_MICRO;
break;
default:
ret = -EINVAL;
......@@ -776,7 +781,7 @@ int cros_ec_sensors_core_read_avail(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_SAMP_FREQ:
*length = ARRAY_SIZE(state->frequencies);
*vals = (const int *)&state->frequencies;
*type = IIO_VAL_INT;
*type = IIO_VAL_INT_PLUS_MICRO;
return IIO_AVAIL_LIST;
}
......@@ -798,12 +803,13 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
int ret;
int ret, frequency;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
frequency = val * 1000 + val2 / 1000;
st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
st->param.sensor_odr.data = val;
st->param.sensor_odr.data = frequency;
/* Always roundup, so caller gets at least what it asks for. */
st->param.sensor_odr.roundup = 1;
......
......@@ -51,6 +51,8 @@ typedef irqreturn_t (*cros_ec_sensors_capture_t)(int irq, void *p);
* is always 8-byte aligned.
* @read_ec_sensors_data: function used for accessing sensors values
* @fifo_max_event_count: Size of the EC sensor FIFO
* @frequencies: Table of known available frequencies:
* 0, Min and Max in mHz
*/
struct cros_ec_sensors_core_state {
struct cros_ec_device *ec;
......@@ -74,9 +76,7 @@ struct cros_ec_sensors_core_state {
unsigned long scan_mask, s16 *data);
u32 fifo_max_event_count;
/* Table of known available frequencies : 0, Min and Max in mHz */
int frequencies[3];
int frequencies[6];
};
int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev, unsigned long scan_mask,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment