Commit 317d3328 authored by Felix Fietkau's avatar Felix Fietkau Committed by John W. Linville

ath9k_hw: Implement PLL control on AR9003

Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Signed-off-by: default avatarLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent f7abf0c1
...@@ -112,8 +112,27 @@ static void ar9003_hw_spur_mitigate(struct ath_hw *ah, ...@@ -112,8 +112,27 @@ static void ar9003_hw_spur_mitigate(struct ath_hw *ah,
static u32 ar9003_hw_compute_pll_control(struct ath_hw *ah, static u32 ar9003_hw_compute_pll_control(struct ath_hw *ah,
struct ath9k_channel *chan) struct ath9k_channel *chan)
{ {
/* TODO */ u32 pll;
return 0;
pll = SM(0x5, AR_RTC_9300_PLL_REFDIV);
if (chan && IS_CHAN_HALF_RATE(chan))
pll |= SM(0x1, AR_RTC_9300_PLL_CLKSEL);
else if (chan && IS_CHAN_QUARTER_RATE(chan))
pll |= SM(0x2, AR_RTC_9300_PLL_CLKSEL);
if (chan && IS_CHAN_5GHZ(chan)) {
pll |= SM(0x28, AR_RTC_9300_PLL_DIV);
/*
* When doing fast clock, set PLL to 0x142c
*/
if (IS_CHAN_A_5MHZ_SPACED(chan))
pll = 0x142c;
} else
pll |= SM(0x2c, AR_RTC_9300_PLL_DIV);
return pll;
} }
static void ar9003_hw_set_channel_regs(struct ath_hw *ah, static void ar9003_hw_set_channel_regs(struct ath_hw *ah,
......
...@@ -1040,6 +1040,12 @@ enum { ...@@ -1040,6 +1040,12 @@ enum {
#define AR_PCIE_MSI (AR_SREV_9300_20_OR_LATER(ah) ? 0x40a4 : 0x4094) #define AR_PCIE_MSI (AR_SREV_9300_20_OR_LATER(ah) ? 0x40a4 : 0x4094)
#define AR_PCIE_MSI_ENABLE 0x00000001 #define AR_PCIE_MSI_ENABLE 0x00000001
#define AR_RTC_9300_PLL_DIV 0x000003ff
#define AR_RTC_9300_PLL_DIV_S 0
#define AR_RTC_9300_PLL_REFDIV 0x00003C00
#define AR_RTC_9300_PLL_REFDIV_S 10
#define AR_RTC_9300_PLL_CLKSEL 0x0000C000
#define AR_RTC_9300_PLL_CLKSEL_S 14
#define AR_RTC_9160_PLL_DIV 0x000003ff #define AR_RTC_9160_PLL_DIV 0x000003ff
#define AR_RTC_9160_PLL_DIV_S 0 #define AR_RTC_9160_PLL_DIV_S 0
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment