Commit 317f06de authored by Gavin Shan's avatar Gavin Shan Committed by Benjamin Herrenschmidt

powerpc/eeh: Move common part to kernel directory

The patch moves the common part of EEH core into arch/powerpc/kernel
directory so that we needn't PPC_PSERIES while compiling POWERNV
platform:

        * Move the EEH common part into arch/powerpc/kernel
        * Move the functions for PCI hotplug from pSeries platform to
          arch/powerpc/kernel/pci-hotplug.c
        * Move CONFIG_EEH from arch/powerpc/platforms/pseries/Kconfig to
          arch/powerpc/platforms/Kconfig
        * Adjust makefile accordingly
Signed-off-by: default avatarGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent a84f273c
......@@ -58,6 +58,8 @@ obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_IBMEBUS) += ibmebus.o
obj-$(CONFIG_EEH) += eeh.o eeh_pe.o eeh_dev.o eeh_cache.o \
eeh_driver.o eeh_event.o eeh_sysfs.o
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_FA_DUMP) += fadump.o
......@@ -100,7 +102,7 @@ obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
pci64-$(CONFIG_PPC64) += pci_dn.o pci-hotplug.o isa-bridge.o
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
pci-common.o pci_of_scan.o
obj-$(CONFIG_PCI_MSI) += msi.o
......
......@@ -316,4 +316,3 @@ void __init eeh_addr_cache_build(void)
eeh_addr_cache_print(&pci_io_addr_cache_root);
#endif
}
......@@ -549,4 +549,3 @@ void eeh_handle_event(struct eeh_pe *pe)
if (frozen_bus)
pcibios_remove_pci_devices(frozen_bus);
}
......@@ -72,4 +72,3 @@ void eeh_sysfs_remove_device(struct pci_dev *pdev)
device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr);
device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
}
/*
* Derived from "arch/powerpc/platforms/pseries/pci_dlpar.c"
*
* Copyright (C) 2003 Linda Xie <lxie@us.ibm.com>
* Copyright (C) 2005 International Business Machines
*
* Updates, 2005, John Rose <johnrose@austin.ibm.com>
* Updates, 2005, Linas Vepstas <linas@austin.ibm.com>
* Updates, 2013, Gavin Shan <shangw@linux.vnet.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/pci.h>
#include <linux/export.h>
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
#include <asm/firmware.h>
#include <asm/eeh.h>
/**
* __pcibios_remove_pci_devices - remove all devices under this bus
* @bus: the indicated PCI bus
* @purge_pe: destroy the PE on removal of PCI devices
*
* Remove all of the PCI devices under this bus both from the
* linux pci device tree, and from the powerpc EEH address cache.
* By default, the corresponding PE will be destroied during the
* normal PCI hotplug path. For PCI hotplug during EEH recovery,
* the corresponding PE won't be destroied and deallocated.
*/
void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
{
struct pci_dev *dev, *tmp;
struct pci_bus *child_bus;
/* First go down child busses */
list_for_each_entry(child_bus, &bus->children, node)
__pcibios_remove_pci_devices(child_bus, purge_pe);
pr_debug("PCI: Removing devices on bus %04x:%02x\n",
pci_domain_nr(bus), bus->number);
list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
pr_debug(" * Removing %s...\n", pci_name(dev));
eeh_remove_bus_device(dev, purge_pe);
pci_stop_and_remove_bus_device(dev);
}
}
/**
* pcibios_remove_pci_devices - remove all devices under this bus
* @bus: the indicated PCI bus
*
* Remove all of the PCI devices under this bus both from the
* linux pci device tree, and from the powerpc EEH address cache.
*/
void pcibios_remove_pci_devices(struct pci_bus *bus)
{
__pcibios_remove_pci_devices(bus, 1);
}
EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
/**
* pcibios_add_pci_devices - adds new pci devices to bus
* @bus: the indicated PCI bus
*
* This routine will find and fixup new pci devices under
* the indicated bus. This routine presumes that there
* might already be some devices under this bridge, so
* it carefully tries to add only new devices. (And that
* is how this routine differs from other, similar pcibios
* routines.)
*/
void pcibios_add_pci_devices(struct pci_bus * bus)
{
int slotno, num, mode, pass, max;
struct pci_dev *dev;
struct device_node *dn = pci_bus_to_OF_node(bus);
eeh_add_device_tree_early(dn);
mode = PCI_PROBE_NORMAL;
if (ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
if (mode == PCI_PROBE_DEVTREE) {
/* use ofdt-based probe */
of_rescan_bus(dn, bus);
} else if (mode == PCI_PROBE_NORMAL) {
/* use legacy probe */
slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
if (!num)
return;
pcibios_setup_bus_devices(bus);
max = bus->busn_res.start;
for (pass = 0; pass < 2; pass++) {
list_for_each_entry(dev, &bus->devices, bus_list) {
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
max = pci_scan_bridge(bus, dev,
max, pass);
}
}
}
pcibios_finish_adding_to_bus(bus);
}
EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);
......@@ -164,6 +164,11 @@ config IBMEBUS
help
Bus device driver for GX bus based adapters.
config EEH
bool
depends on (PPC_POWERNV || PPC_PSERIES) && PCI
default y
config PPC_MPC106
bool
default n
......
......@@ -33,11 +33,6 @@ config PPC_SPLPAR
processors, that is, which share physical processors between
two or more partitions.
config EEH
bool
depends on PPC_PSERIES && PCI
default y
config PSERIES_MSI
bool
depends on PCI_MSI && EEH
......
......@@ -6,9 +6,7 @@ obj-y := lpar.o hvCall.o nvram.o reconfig.o \
firmware.o power.o dlpar.o mobility.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_SCANLOG) += scanlog.o
obj-$(CONFIG_EEH) += eeh.o eeh_pe.o eeh_dev.o eeh_cache.o \
eeh_driver.o eeh_event.o eeh_sysfs.o \
eeh_pseries.o
obj-$(CONFIG_EEH) += eeh_pseries.o
obj-$(CONFIG_KEXEC) += kexec.o
obj-$(CONFIG_PCI) += pci.o pci_dlpar.o
obj-$(CONFIG_PSERIES_MSI) += msi.o
......
......@@ -64,91 +64,6 @@ pcibios_find_pci_bus(struct device_node *dn)
}
EXPORT_SYMBOL_GPL(pcibios_find_pci_bus);
/**
* __pcibios_remove_pci_devices - remove all devices under this bus
* @bus: the indicated PCI bus
* @purge_pe: destroy the PE on removal of PCI devices
*
* Remove all of the PCI devices under this bus both from the
* linux pci device tree, and from the powerpc EEH address cache.
* By default, the corresponding PE will be destroied during the
* normal PCI hotplug path. For PCI hotplug during EEH recovery,
* the corresponding PE won't be destroied and deallocated.
*/
void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
{
struct pci_dev *dev, *tmp;
struct pci_bus *child_bus;
/* First go down child busses */
list_for_each_entry(child_bus, &bus->children, node)
__pcibios_remove_pci_devices(child_bus, purge_pe);
pr_debug("PCI: Removing devices on bus %04x:%02x\n",
pci_domain_nr(bus), bus->number);
list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
pr_debug(" * Removing %s...\n", pci_name(dev));
eeh_remove_bus_device(dev, purge_pe);
pci_stop_and_remove_bus_device(dev);
}
}
/**
* pcibios_remove_pci_devices - remove all devices under this bus
*
* Remove all of the PCI devices under this bus both from the
* linux pci device tree, and from the powerpc EEH address cache.
*/
void pcibios_remove_pci_devices(struct pci_bus *bus)
{
__pcibios_remove_pci_devices(bus, 1);
}
EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
/**
* pcibios_add_pci_devices - adds new pci devices to bus
*
* This routine will find and fixup new pci devices under
* the indicated bus. This routine presumes that there
* might already be some devices under this bridge, so
* it carefully tries to add only new devices. (And that
* is how this routine differs from other, similar pcibios
* routines.)
*/
void pcibios_add_pci_devices(struct pci_bus * bus)
{
int slotno, num, mode, pass, max;
struct pci_dev *dev;
struct device_node *dn = pci_bus_to_OF_node(bus);
eeh_add_device_tree_early(dn);
mode = PCI_PROBE_NORMAL;
if (ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
if (mode == PCI_PROBE_DEVTREE) {
/* use ofdt-based probe */
of_rescan_bus(dn, bus);
} else if (mode == PCI_PROBE_NORMAL) {
/* use legacy probe */
slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
if (!num)
return;
pcibios_setup_bus_devices(bus);
max = bus->busn_res.start;
for (pass=0; pass < 2; pass++)
list_for_each_entry(dev, &bus->devices, bus_list) {
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
max = pci_scan_bridge(bus, dev, max, pass);
}
}
pcibios_finish_adding_to_bus(bus);
}
EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);
struct pci_controller *init_phb_dynamic(struct device_node *dn)
{
struct pci_controller *phb;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment