[ARM] Move a bunch of symbol exports from armksyms.c

This moves a bunch of EXPORT_SYMBOL() statements from armksyms.c
into the file which defines the function/variable such that the
exports are localised.

This also means we can get rid of the ugly __xxx_to_xxx__is_a_macro
in include/asm-arm/arch-*/memory.h

arch/arm/kernel/armksyms.c

@@ -7,41 +7,16 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/config.h>
 #include <linux/module.h>
-#include <linux/user.h>
 #include <linux/string.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/mman.h>
-#include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/in6.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-#include <linux/tty.h>
-#include <linux/vt_kern.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 
-#include <asm/byteorder.h>
-#include <asm/elf.h>
+#include <asm/checksum.h>
 #include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/proc-fns.h>
-#include <asm/processor.h>
-#include <asm/semaphore.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
-#include <asm/checksum.h>
-#include <asm/mach-types.h>
-
-extern void dump_thread(struct pt_regs *, struct user *);
-extern int dump_fpu(struct pt_regs *, struct user_fp_struct *);
-extern void inswb(unsigned int port, void *to, int len);
-extern void outswb(unsigned int port, const void *to, int len);
-
-extern void __bad_xchg(volatile void *ptr, int size);
 
 /*
  * libgcc functions - functions that are used internally by the
@@ -61,12 +36,9 @@ extern void __udivmoddi4(void);
 extern void __udivsi3(void);
 extern void __umodsi3(void);
 extern void __do_div64(void);
-extern void abort(void);
 
-extern void ret_from_exception(void);
 extern void fpundefinstr(void);
 extern void fp_enter(void);
-extern void fp_init(union fp_state *);
 
 /*
  * This has a special calling convention; it doesn't
@@ -88,32 +60,7 @@ EXPORT_SYMBOL_ALIAS(fp_send_sig,send_sig);
 EXPORT_SYMBOL_NOVERS(__backtrace);
 
 	/* platform dependent support */
-EXPORT_SYMBOL(dump_thread);
-EXPORT_SYMBOL(dump_fpu);
 EXPORT_SYMBOL(udelay);
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(__iounmap);
-EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(system_rev);
-EXPORT_SYMBOL(system_serial_low);
-EXPORT_SYMBOL(system_serial_high);
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-EXPORT_SYMBOL(__bug);
-#endif
-EXPORT_SYMBOL(__bad_xchg);
-EXPORT_SYMBOL(__readwrite_bug);
-EXPORT_SYMBOL(enable_irq);
-EXPORT_SYMBOL(disable_irq);
-EXPORT_SYMBOL(probe_irq_mask);
-EXPORT_SYMBOL(set_irq_type);
-EXPORT_SYMBOL(enable_irq_wake);
-EXPORT_SYMBOL(disable_irq_wake);
-EXPORT_SYMBOL(pm_idle);
-EXPORT_SYMBOL(pm_power_off);
-EXPORT_SYMBOL(fp_init);
-
-	/* processor dependencies */
-EXPORT_SYMBOL(__machine_arch_type);
 
 	/* networking */
 EXPORT_SYMBOL(csum_partial);
@@ -138,20 +85,6 @@ EXPORT_SYMBOL_NOVERS(__raw_writesw);
 #endif
 #ifndef __raw_writesl
 EXPORT_SYMBOL_NOVERS(__raw_writesl);
-#endif
-
-	/* address translation */
-#ifndef __virt_to_phys__is_a_macro
-EXPORT_SYMBOL(__virt_to_phys);
-#endif
-#ifndef __phys_to_virt__is_a_macro
-EXPORT_SYMBOL(__phys_to_virt);
-#endif
-#ifndef __virt_to_bus__is_a_macro
-EXPORT_SYMBOL(__virt_to_bus);
-#endif
-#ifndef __bus_to_virt__is_a_macro
-EXPORT_SYMBOL(__bus_to_virt);
 #endif
 
 	/* string / mem functions */
@@ -227,10 +160,6 @@ EXPORT_SYMBOL(_find_first_zero_bit_be);
 EXPORT_SYMBOL(_find_next_zero_bit_be);
 #endif
 
-	/* elf */
-EXPORT_SYMBOL(elf_platform);
-EXPORT_SYMBOL(elf_hwcap);
-
 	/* syscalls */
 EXPORT_SYMBOL(sys_write);
 EXPORT_SYMBOL(sys_read);
@@ -238,11 +167,3 @@ EXPORT_SYMBOL(sys_lseek);
 EXPORT_SYMBOL(sys_open);
 EXPORT_SYMBOL(sys_exit);
 EXPORT_SYMBOL(sys_wait4);
-
-	/* semaphores */
-EXPORT_SYMBOL_NOVERS(__down_failed);
-EXPORT_SYMBOL_NOVERS(__down_interruptible_failed);
-EXPORT_SYMBOL_NOVERS(__down_trylock_failed);
-EXPORT_SYMBOL_NOVERS(__up_wakeup);
-
-EXPORT_SYMBOL(get_wchan);

arch/arm/kernel/irq.c

@@ -103,6 +103,7 @@ void disable_irq(unsigned int irq)
 	list_del_init(&desc->pend);
 	spin_unlock_irqrestore(&irq_controller_lock, flags);
 }
+EXPORT_SYMBOL(disable_irq);
 
 /**
  *	enable_irq - enable interrupt handling on an irq
@@ -142,6 +143,7 @@ void enable_irq(unsigned int irq)
 	}
 	spin_unlock_irqrestore(&irq_controller_lock, flags);
 }
+EXPORT_SYMBOL(enable_irq);
 
 /*
  * Enable wake on selected irq
@@ -156,6 +158,7 @@ void enable_irq_wake(unsigned int irq)
 		desc->chip->wake(irq, 1);
 	spin_unlock_irqrestore(&irq_controller_lock, flags);
 }
+EXPORT_SYMBOL(enable_irq_wake);
 
 void disable_irq_wake(unsigned int irq)
 {
@@ -167,6 +170,7 @@ void disable_irq_wake(unsigned int irq)
 		desc->chip->wake(irq, 0);
 	spin_unlock_irqrestore(&irq_controller_lock, flags);
 }
+EXPORT_SYMBOL(disable_irq_wake);
 
 int show_interrupts(struct seq_file *p, void *v)
 {
@@ -541,6 +545,7 @@ int set_irq_type(unsigned int irq, unsigned int type)
 
 	return ret;
 }
+EXPORT_SYMBOL(set_irq_type);
 
 void set_irq_flags(unsigned int irq, unsigned int iflags)
 {
@@ -798,6 +803,7 @@ unsigned int probe_irq_mask(unsigned long irqs)
 
 	return mask;
 }
+EXPORT_SYMBOL(probe_irq_mask);
 
 /*
  * Possible return values:

arch/arm/kernel/process.c

@@ -73,7 +73,10 @@ __setup("hlt", hlt_setup);
  * The following aren't currently used.
  */
 void (*pm_idle)(void);
+EXPORT_SYMBOL(pm_idle);
+
 void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
 
 /*
  * This is our default idle handler.  We need to disable
@@ -301,6 +304,7 @@ static void default_fp_init(union fp_state *fp)
 }
 
 void (*fp_init)(union fp_state *) = default_fp_init;
+EXPORT_SYMBOL(fp_init);
 
 void flush_thread(void)
 {
@@ -350,6 +354,7 @@ int dump_fpu (struct pt_regs *regs, struct user_fp *fp)
 
 	return used_math != 0;
 }
+EXPORT_SYMBOL(dump_fpu);
 
 /*
  * fill in the user structure for a core dump..
@@ -378,6 +383,7 @@ void dump_thread(struct pt_regs * regs, struct user * dump)
 	dump->regs = *regs;
 	dump->u_fpvalid = dump_fpu (regs, &dump->u_fp);
 }
+EXPORT_SYMBOL(dump_thread);
 
 /*
  * Shuffle the argument into the correct register before calling the
@@ -385,13 +391,15 @@ void dump_thread(struct pt_regs * regs, struct user * dump)
  * the thread function, and r3 points to the exit function.
  */
 extern void kernel_thread_helper(void);
-asm(	".align\n"
+asm(	".section .text\n"
+"	.align\n"
 "	.type	kernel_thread_helper, #function\n"
 "kernel_thread_helper:\n"
 "	mov	r0, r1\n"
 "	mov	lr, r3\n"
 "	mov	pc, r2\n"
-"	.size	kernel_thread_helper, . - kernel_thread_helper");
+"	.size	kernel_thread_helper, . - kernel_thread_helper\n"
+"	.previous");
 
 /*
  * Create a kernel thread.
@@ -410,6 +418,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
+EXPORT_SYMBOL(kernel_thread);
 
 unsigned long get_wchan(struct task_struct *p)
 {
@@ -431,3 +440,4 @@ unsigned long get_wchan(struct task_struct *p)
 	} while (count ++ < 16);
 	return 0;
 }
+EXPORT_SYMBOL(get_wchan);

arch/arm/kernel/semaphore.c

@@ -11,6 +11,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/errno.h>
 #include <linux/init.h>
@@ -213,3 +214,7 @@ __up_wakeup:					\n\
 	ldmfd	sp!, {r0 - r3, pc}		\n\
 	");
 
+EXPORT_SYMBOL_NOVERS(__down_failed);
+EXPORT_SYMBOL_NOVERS(__down_interruptible_failed);
+EXPORT_SYMBOL_NOVERS(__down_trylock_failed);
+EXPORT_SYMBOL_NOVERS(__up_wakeup);

arch/arm/kernel/setup.c

@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/config.h>
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/stddef.h>
 #include <linux/ioport.h>
@@ -61,10 +62,20 @@ extern int _stext, _text, _etext, _edata, _end;
 
 unsigned int processor_id;
 unsigned int __machine_arch_type;
+EXPORT_SYMBOL(__machine_arch_type);
+
 unsigned int system_rev;
+EXPORT_SYMBOL(system_rev);
+
 unsigned int system_serial_low;
+EXPORT_SYMBOL(system_serial_low);
+
 unsigned int system_serial_high;
+EXPORT_SYMBOL(system_serial_high);
+
 unsigned int elf_hwcap;
+EXPORT_SYMBOL(elf_hwcap);
+
 
 #ifdef MULTI_CPU
 struct processor processor;
@@ -80,7 +91,10 @@ struct cpu_cache_fns cpu_cache;
 #endif
 
 unsigned char aux_device_present;
+
 char elf_platform[ELF_PLATFORM_SIZE];
+EXPORT_SYMBOL(elf_platform);
+
 char saved_command_line[COMMAND_LINE_SIZE];
 unsigned long phys_initrd_start __initdata = 0;
 unsigned long phys_initrd_size __initdata = 0;

arch/arm/kernel/traps.c

@@ -495,6 +495,7 @@ void __bad_xchg(volatile void *ptr, int size)
 		__builtin_return_address(0), ptr, size);
 	BUG();
 }
+EXPORT_SYMBOL(__bad_xchg);
 
 /*
  * A data abort trap was taken, but we did not handle the instruction.
@@ -532,12 +533,14 @@ volatile void __bug(const char *file, int line, void *data)
 	printk("\n");
 	*(int *)0 = 0;
 }
+EXPORT_SYMBOL(__bug);
 
 void __readwrite_bug(const char *fn)
 {
 	printk("%s called, but not implemented", fn);
 	BUG();
 }
+EXPORT_SYMBOL(__readwrite_bug);
 
 void __pte_error(const char *file, int line, unsigned long val)
 {
@@ -559,6 +562,7 @@ asmlinkage void __div0(void)
 	printk("Division by zero in kernel.\n");
 	dump_stack();
 }
+EXPORT_SYMBOL_NOVERS(__div0);
 
 void abort(void)
 {
@@ -567,6 +571,7 @@ void abort(void)
 	/* if that doesn't kill us, halt */
 	panic("Oops failed to kill thread");
 }
+EXPORT_SYMBOL(abort);
 
 void __init trap_init(void)
 {

arch/arm/mach-footbridge/mm.c

@@ -87,6 +87,7 @@ unsigned long __virt_to_bus(unsigned long res)
 
 	return (res - PAGE_OFFSET) + (*CSR_PCISDRAMBASE & 0xfffffff0);
 }
+EXPORT_SYMBOL(__virt_to_bus);
 
 unsigned long __bus_to_virt(unsigned long res)
 {
@@ -97,5 +98,6 @@ unsigned long __bus_to_virt(unsigned long res)
 
 	return res;
 }
+EXPORT_SYMBOL(__bus_to_virt);
 
 #endif

arch/arm/mm/ioremap.c

@@ -162,8 +162,10 @@ __ioremap(unsigned long phys_addr, size_t size, unsigned long flags,
 	}
 	return (void *) (offset + (char *)addr);
 }
+EXPORT_SYMBOL(__ioremap);
 
 void __iounmap(void *addr)
 {
 	vfree((void *) (PAGE_MASK & (unsigned long) addr));
 }
+EXPORT_SYMBOL(__iounmap);

include/asm-arm/arch-adifcc/memory.h

@@ -33,8 +33,6 @@
 /*
  * physical vs virtual ram conversion
  */
-#define __virt_to_phys__is_a_macro
-#define __phys_to_virt__is_a_macro
 #define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
 
@@ -47,8 +45,6 @@
  *
  * These are dummies for now.
  */
-#define __virt_to_bus__is_a_macro
-#define __bus_to_virt__is_a_macro
 #define __virt_to_bus(x)	 __virt_to_phys(x)
 #define __bus_to_virt(x)	 __phys_to_virt(x)
 

include/asm-arm/arch-cl7500/memory.h

@@ -32,18 +32,14 @@
 #define PAGE_OFFSET	(0xc0000000UL)
 #define PHYS_OFFSET	(0x10000000UL)
 
-#define __virt_to_phys__is_a_macro
 #define __virt_to_phys(vpage) ((vpage) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt__is_a_macro
 #define __phys_to_virt(ppage) ((ppage) + PAGE_OFFSET - PHYS_OFFSET)
 
 /*
  * These are exactly the same on the RiscPC as the
  * physical memory view.
  */
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x) __phys_to_virt(x)
 
 #endif

include/asm-arm/arch-clps711x/memory.h

@@ -43,9 +43,7 @@
 /*
  * On integrator, the dram is contiguous
  */
-#define __virt_to_phys__is_a_macro
 #define __virt_to_phys(vpage) ((vpage) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt__is_a_macro
 #define __phys_to_virt(ppage) ((ppage) + PAGE_OFFSET - PHYS_OFFSET)
 
 /*
@@ -58,23 +56,17 @@
 
 #if defined(CONFIG_ARCH_CDB89712)
 
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x)	(x)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x)	(x)
 
 #elif defined (CONFIG_ARCH_AUTCPU12)
 
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x)	(x)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x)	(x)
 
 #else
 
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x)	((x) + PAGE_OFFSET)
 
 #endif

include/asm-arm/arch-ebsa110/memory.h

@@ -34,18 +34,14 @@
 #define PAGE_OFFSET	(0xc0000000UL)
 #define PHYS_OFFSET	(0x00000000UL)
 
-#define __virt_to_phys__is_a_macro
 #define __virt_to_phys(vpage)	((vpage) - PAGE_OFFSET)
-#define __phys_to_virt__is_a_macro
 #define __phys_to_virt(ppage)	((ppage) + PAGE_OFFSET)
 
 /*
  * We keep this 1:1 so that we don't interfere
  * with the PCMCIA memory regions
  */
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x)	(x)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x)	(x)
 
 #endif

include/asm-arm/arch-ebsa285/memory.h

@@ -34,9 +34,7 @@ extern unsigned long __bus_to_virt(unsigned long);
 
 #elif defined(CONFIG_FOOTBRIDGE_HOST)
 
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x)	((x) - 0xe0000000)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x)	((x) + 0xe0000000)
 
 #else
@@ -75,9 +73,7 @@ extern unsigned long __bus_to_virt(unsigned long);
 /*
  * The DRAM is always contiguous.
  */
-#define __virt_to_phys__is_a_macro
 #define __virt_to_phys(vpage) ((unsigned long)(vpage) - PAGE_OFFSET)
-#define __phys_to_virt__is_a_macro
 #define __phys_to_virt(ppage) ((unsigned long)(ppage) + PAGE_OFFSET)
 
 #endif

include/asm-arm/arch-epxa10db/memory.h

@@ -41,9 +41,7 @@
 /*
  * On epxa10, the dram is contiguous
  */
-#define __virt_to_phys__is_a_macro
 #define __virt_to_phys(vpage) ((vpage) - PAGE_OFFSET)
-#define __phys_to_virt__is_a_macro
 #define __phys_to_virt(ppage) ((ppage) + PAGE_OFFSET)
 
 /*
@@ -53,9 +51,7 @@
  * bus_to_virt: Used to convert an address for DMA operations
  *              to an address that the kernel can use.
  */
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x)	(x - PAGE_OFFSET + /*SDRAM_BASE*/0)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x)	(x - /*SDRAM_BASE*/0 + PAGE_OFFSET)
 
 #endif

include/asm-arm/arch-integrator/memory.h

@@ -41,9 +41,7 @@
 /*
  * On integrator, the dram is contiguous
  */
-#define __virt_to_phys__is_a_macro
 #define __virt_to_phys(vpage) ((vpage) - PAGE_OFFSET)
-#define __phys_to_virt__is_a_macro
 #define __phys_to_virt(ppage) ((ppage) + PAGE_OFFSET)
 
 #define BUS_OFFSET	(0x80000000UL)
@@ -55,9 +53,7 @@
  * bus_to_virt: Used to convert an address for DMA operations
  *              to an address that the kernel can use.
  */
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x)	(x - PAGE_OFFSET + BUS_OFFSET)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x)	(x - BUS_OFFSET + PAGE_OFFSET)
 
 #endif

include/asm-arm/arch-iop3xx/memory.h

@@ -34,8 +34,6 @@
 /*
  * physical vs virtual ram conversion
  */
-#define __virt_to_phys__is_a_macro
-#define __phys_to_virt__is_a_macro
 #define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
 
@@ -46,9 +44,6 @@
  * bus_to_virt: Used to convert an address for DMA operations
  *		to an address that the kernel can use.
  */
-#define __virt_to_bus__is_a_macro
-#define __bus_to_virt__is_a_macro
-
 #ifdef CONFIG_ARCH_IOP310
 
 #define __virt_to_bus(x)	(((__virt_to_phys(x)) & ~(*IOP310_SIATVR)) | ((*IOP310_SIABAR) & 0xfffffff0))

include/asm-arm/arch-ixp4xx/memory.h

@@ -27,8 +27,6 @@
 /*
  * physical vs virtual ram conversion
  */
-#define __virt_to_phys__is_a_macro
-#define __phys_to_virt__is_a_macro
 #define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
 
@@ -41,8 +39,6 @@
  *
  * These are dummies for now.
  */
-#define __virt_to_bus__is_a_macro
-#define __bus_to_virt__is_a_macro
 #define __virt_to_bus(x)	 __virt_to_phys(x)
 #define __bus_to_virt(x)	 __phys_to_virt(x)
 

include/asm-arm/arch-l7200/memory.h

@@ -37,14 +37,10 @@
 /*
  * The DRAM is contiguous.
  */
-#define __virt_to_phys__is_a_macro
 #define __virt_to_phys(vpage) ((vpage) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt__is_a_macro
 #define __phys_to_virt(ppage) ((ppage) + PAGE_OFFSET - PHYS_OFFSET)
 
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x) __phys_to_virt(x)
 
 #endif

include/asm-arm/arch-lh7a40x/memory.h

@@ -39,8 +39,6 @@
 /*
  * physical vs virtual ram conversion
  */
-#define __virt_to_phys__is_a_macro
-#define __phys_to_virt__is_a_macro
 #define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
 
@@ -51,8 +49,6 @@
  * bus_to_virt: Used to convert an address for DMA operations
  *		to an address that the kernel can use.
  */
-#define __virt_to_bus__is_a_macro
-#define __bus_to_virt__is_a_macro
 #define __virt_to_bus(x)	 __virt_to_phys(x)
 #define __bus_to_virt(x)	 __phys_to_virt(x)
 

include/asm-arm/arch-nexuspci/memory.h

@@ -32,15 +32,11 @@
  */
 #define __virt_to_phys(vpage) ((unsigned long)(vpage) - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(ppage) ((unsigned long)(ppage) + PAGE_OFFSET - PHYS_OFFSET)
-#define __virt_to_phys__is_a_macro
-#define __phys_to_virt__is_a_macro
 
 /*
  * On the PCI bus the DRAM appears at address 0xe0000000
  */
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x) ((unsigned long)(x) - PAGE_OFFSET + BUS_OFFSET)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x) ((unsigned long)(x) + PAGE_OFFSET - BUS_OFFSET)
 
 #endif

include/asm-arm/arch-omap/memory.h

@@ -59,9 +59,7 @@
 /*
  * The DRAM is contiguous.
  */
-#define __virt_to_phys__is_a_macro
 #define __virt_to_phys(vpage) ((vpage) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt__is_a_macro
 #define __phys_to_virt(ppage) ((ppage) + PAGE_OFFSET - PHYS_OFFSET)
 
 /*
@@ -69,8 +67,6 @@
  * NOTE: Physical address must be converted to Local Bus address
  *	 on OMAP-1510 only
  */
-#define __virt_to_bus__is_a_macro
-#define __bus_to_virt__is_a_macro
 
 /*
  * Bus address is physical address, except for OMAP-1510 Local Bus.

include/asm-arm/arch-pxa/memory.h

@@ -38,8 +38,6 @@
 /*
  * physical vs virtual ram conversion
  */
-#define __virt_to_phys__is_a_macro
-#define __phys_to_virt__is_a_macro
 #define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
 
@@ -50,8 +48,6 @@
  * bus_to_virt: Used to convert an address for DMA operations
  *		to an address that the kernel can use.
  */
-#define __virt_to_bus__is_a_macro
-#define __bus_to_virt__is_a_macro
 #define __virt_to_bus(x)	 __virt_to_phys(x)
 #define __bus_to_virt(x)	 __phys_to_virt(x)
 

include/asm-arm/arch-rpc/memory.h

@@ -36,18 +36,14 @@
 #define PAGE_OFFSET	(0xc0000000UL)
 #define PHYS_OFFSET	(0x10000000UL)
 
-#define __virt_to_phys__is_a_macro
 #define __virt_to_phys(vpage) ((vpage) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt__is_a_macro
 #define __phys_to_virt(ppage) ((ppage) + PAGE_OFFSET - PHYS_OFFSET)
 
 /*
  * These are exactly the same on the RiscPC as the
  * physical memory view.
  */
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x) __phys_to_virt(x)
 
 #endif

include/asm-arm/arch-s3c2410/memory.h

@@ -43,9 +43,7 @@
 #define PAGE_OFFSET	(0xc0000000UL)
 #define PHYS_OFFSET	(0x30000000UL)
 
-#define __virt_to_phys__is_a_macro
 #define __virt_to_phys(vpage) ((vpage) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt__is_a_macro
 #define __phys_to_virt(ppage) ((ppage) + PAGE_OFFSET - PHYS_OFFSET)
 
 /*
@@ -53,9 +51,7 @@
  * physical memory view.
 */
 
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x) __phys_to_virt(x)
 
 #endif

include/asm-arm/arch-sa1100/memory.h

@@ -36,8 +36,6 @@
  * same.  The NUMA code is handling the large holes that might exist between
  * all memory banks.
  */
-#define __virt_to_phys__is_a_macro
-#define __phys_to_virt__is_a_macro
 #define __virt_to_phys(x)	(x)
 #define __phys_to_virt(x)	(x)
 
@@ -50,8 +48,6 @@
  *
  * On the SA1100, bus addresses are equivalent to physical addresses.
  */
-#define __virt_to_bus__is_a_macro
-#define __bus_to_virt__is_a_macro
 #define __virt_to_bus(x)	 __virt_to_phys(x)
 #define __bus_to_virt(x)	 __phys_to_virt(x)
 

include/asm-arm/arch-shark/memory.h

@@ -28,14 +28,10 @@
 #define PAGE_OFFSET	(0xC0000000UL)
 #define PHYS_OFFSET     (0x08000000UL)
 
-#define __virt_to_phys__is_a_macro
-#define __phys_to_virt__is_a_macro
 #define __virt_to_phys(vpage) (vpage - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(ppage) (ppage - PHYS_OFFSET + PAGE_OFFSET)
 
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x)	__phys_to_virt(x)
 
 #endif

include/asm-arm/arch-tbox/memory.h

@@ -30,15 +30,11 @@
  */
 #define __virt_to_phys(vpage) ((vpage) - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(ppage) ((ppage) + PAGE_OFFSET - PHYS_OFFSET)
-#define __virt_to_phys__is_a_macro
-#define __phys_to_virt__is_a_macro
 
 /*
  * Bus view is the same as physical view
  */
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x)	__phys_to_virt(x)
 
 #endif

include/asm-arm/arch-versatile/memory.h

@@ -41,9 +41,7 @@
 /*
  * On Versatile PB, the dram is contiguous
  */
-#define __virt_to_phys__is_a_macro
 #define __virt_to_phys(vpage) ((vpage) - PAGE_OFFSET)
-#define __phys_to_virt__is_a_macro
 #define __phys_to_virt(ppage) ((ppage) + PAGE_OFFSET)
 
 /*
@@ -53,9 +51,7 @@
  * bus_to_virt: Used to convert an address for DMA operations
  *              to an address that the kernel can use.
  */
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x)	((x) + PAGE_OFFSET)
 
 #endif