Commit 3215b494 authored by Arend van Spriel's avatar Arend van Spriel Committed by Greg Kroah-Hartman

staging: brcm80211: remove ht_cap field from brcms_c_info structure

The field ht_cap was typed ieee80211_ht_cap from ieee80211.h. This
contained little endian annotated field cap_info resulting in sparse
endian warnings. It turned out the driver was setting the field, but
it was actually never used. Therefore it has been removed.
Reported-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: default avatarRoland Vossen <rvossen@broadcom.com>
Signed-off-by: default avatarFranky Lin <frankyl@broadcom.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 261f992b
......@@ -325,11 +325,6 @@ static u16 frametype(u32 rspec, u8 mimoframe)
*/
#define SSID_FMT_BUF_LEN ((4 * IEEE80211_MAX_SSID_LEN) + 1)
/* defaults for the HT (MIMO) bss */
#define HT_CAP (IEEE80211_HT_CAP_SM_PS |\
IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_GRN_FLD |\
IEEE80211_HT_CAP_MAX_AMSDU | IEEE80211_HT_CAP_DSSSCCK40)
/*
* The following table lists the buffer memory allocated to xmt fifos in HW.
* the size is in units of 256bytes(one block), total size is HW dependent
......@@ -4213,13 +4208,6 @@ void brcms_c_protection_upd(struct brcms_c_info *wlc, uint idx, int val)
static void brcms_c_ht_update_sgi_rx(struct brcms_c_info *wlc, int val)
{
wlc->ht_cap.cap_info &= ~(IEEE80211_HT_CAP_SGI_20 |
IEEE80211_HT_CAP_SGI_40);
wlc->ht_cap.cap_info |= (val & BRCMS_N_SGI_20) ?
IEEE80211_HT_CAP_SGI_20 : 0;
wlc->ht_cap.cap_info |= (val & BRCMS_N_SGI_40) ?
IEEE80211_HT_CAP_SGI_40 : 0;
if (wlc->pub->up) {
brcms_c_update_beacon(wlc);
brcms_c_update_probe_resp(wlc, true);
......@@ -4230,10 +4218,6 @@ static void brcms_c_ht_update_ldpc(struct brcms_c_info *wlc, s8 val)
{
wlc->stf->ldpc = val;
wlc->ht_cap.cap_info &= ~IEEE80211_HT_CAP_LDPC_CODING;
if (wlc->stf->ldpc != OFF)
wlc->ht_cap.cap_info |= IEEE80211_HT_CAP_LDPC_CODING;
if (wlc->pub->up) {
brcms_c_update_beacon(wlc);
brcms_c_update_probe_resp(wlc, true);
......@@ -5376,8 +5360,6 @@ brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit,
wlc->bsscfg->wlc = wlc;
wlc->mimoft = FT_HT;
wlc->ht_cap.cap_info = HT_CAP;
wlc->mimo_40txbw = AUTO;
wlc->ofdm_40txbw = AUTO;
wlc->cck_40txbw = AUTO;
......@@ -5403,15 +5385,10 @@ brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit,
if (n_disabled & WLFEATURE_DISABLE_11N_STBC_TX) {
wlc->bandstate[BAND_2G_INDEX]->band_stf_stbc_tx = OFF;
wlc->bandstate[BAND_5G_INDEX]->band_stf_stbc_tx = OFF;
wlc->ht_cap.cap_info &= ~IEEE80211_HT_CAP_TX_STBC;
}
if (n_disabled & WLFEATURE_DISABLE_11N_STBC_RX)
brcms_c_stf_stbc_rx_set(wlc, HT_CAP_RX_STBC_NO);
/* apply the GF override from nvram conf */
if (n_disabled & WLFEATURE_DISABLE_11N_GF)
wlc->ht_cap.cap_info &= ~IEEE80211_HT_CAP_GRN_FLD;
/* initialize radio_mpc_disable according to wlc->mpc */
brcms_c_radio_mpc_upd(wlc);
brcms_b_antsel_set(wlc->hw, wlc->asi->antsel_avail);
......
......@@ -456,7 +456,6 @@ struct brcms_txq_info {
* cck_40txbw: 11N, cck tx b/w override when in 40MHZ mode.
* ofdm_40txbw: 11N, ofdm tx b/w override when in 40MHZ mode.
* mimo_40txbw: 11N, mimo tx b/w override when in 40MHZ mode.
* ht_cap: HT CAP IE being advertised by this node.
* default_bss: configured BSS parameters.
* mc_fid_counter: BC/MC FIFO frame ID counter.
* country_default: saved country for leaving 802.11d auto-country mode.
......@@ -570,7 +569,6 @@ struct brcms_c_info {
s8 cck_40txbw;
s8 ofdm_40txbw;
s8 mimo_40txbw;
struct ieee80211_ht_cap ht_cap;
struct brcms_bss_info *default_bss;
......
......@@ -53,9 +53,6 @@ static void brcms_c_stf_stbc_rx_ht_update(struct brcms_c_info *wlc, int val)
return;
}
wlc->ht_cap.cap_info &= ~IEEE80211_HT_CAP_RX_STBC;
wlc->ht_cap.cap_info |= (val << IEEE80211_HT_CAP_RX_STBC_SHIFT);
if (wlc->pub->up) {
brcms_c_update_beacon(wlc);
brcms_c_update_probe_resp(wlc, true);
......@@ -140,12 +137,6 @@ static bool brcms_c_stf_stbc_tx_set(struct brcms_c_info *wlc, s32 int_val)
if ((int_val == ON) && (wlc->stf->txstreams == 1))
return false;
if ((int_val == OFF) || (wlc->stf->txstreams == 1)
|| !BRCMS_STBC_CAP_PHY(wlc))
wlc->ht_cap.cap_info &= ~IEEE80211_HT_CAP_TX_STBC;
else
wlc->ht_cap.cap_info |= IEEE80211_HT_CAP_TX_STBC;
wlc->bandstate[BAND_2G_INDEX]->band_stf_stbc_tx = (s8) int_val;
wlc->bandstate[BAND_5G_INDEX]->band_stf_stbc_tx = (s8) int_val;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment