[Blackfin] arch: Update default config

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

arch/blackfin/configs/BF527-EZKIT_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.14
-# Thu Nov 29 17:32:47 2007
+# Linux kernel version: 2.6.22.16
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -116,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Processor and Board Settings
 #
 # CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
 # CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
 CONFIG_BF527=y
 # CONFIG_BF531 is not set
 # CONFIG_BF532 is not set
@@ -306,6 +308,7 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_WB is not set
 CONFIG_BFIN_WT=y
 CONFIG_L1_MAX_PIECE=16
+# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration
@@ -354,6 +357,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # Networking
@@ -496,7 +500,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_MW320D=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -506,9 +509,6 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_SIZE=0x400000
-CONFIG_EBIU_FLASH_BASE=0x20000000
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -684,7 +684,6 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_BF53X_PFBUTTONS is not set
 # CONFIG_TWI_KEYPAD is not set
 
 #
@@ -702,12 +701,12 @@ CONFIG_INPUT_MISC=y
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
 # CONFIG_AD5304 is not set
-# CONFIG_BF5xx_TEA5764 is not set
-# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -772,7 +771,6 @@ CONFIG_I2C_CHARDEV=m
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_BLACKFIN_GPIO is not set
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_GPIO is not set

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -322,10 +322,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x80
 
 #
 # CPU Frequency scaling
@@ -697,7 +696,6 @@ CONFIG_SERIAL_BFIN_DMA=y
 # CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
 # CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -323,10 +323,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x80
 
 #
 # CPU Frequency scaling
@@ -714,7 +713,6 @@ CONFIG_SERIAL_BFIN_DMA=y
 # CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
 # CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -330,10 +330,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x8
 
 #
 # CPU Frequency scaling
@@ -1013,6 +1012,7 @@ CONFIG_SND_BFIN_AD73311_SE=4
 CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_SOC=m
 CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
 CONFIG_SND_BF5XX_SOC_AC97=m
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -396,6 +396,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
@@ -1075,6 +1076,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_SOC=y
 CONFIG_SND_BF5XX_SOC=y
+CONFIG_SND_MMAP_SUPPORT=y
 CONFIG_SND_BF5XX_SOC_AC97=y
 CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set

arch/blackfin/configs/BF561-EZKIT_defconfig

@@ -367,6 +367,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # Networking