Commit 32c6a7ba authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

[PATCH] I2C: move i2c-elv.c driver to drivers/i2c/busses

parent d4a3a5f8
...@@ -48,16 +48,6 @@ config I2C_ALGOBIT ...@@ -48,16 +48,6 @@ config I2C_ALGOBIT
This support is also available as a module. If so, the module This support is also available as a module. If so, the module
will be called i2c-algo-bit. will be called i2c-algo-bit.
config I2C_ELV
tristate "ELV adapter"
depends on I2C_ALGOBIT && ISA
help
This supports parallel-port I2C adapters called ELV. Say Y if you
own such an adapter.
This support is also available as a module. If so, the module
will be called i2c-elv.
config I2C_VELLEMAN config I2C_VELLEMAN
tristate "Velleman K9000 adapter" tristate "Velleman K9000 adapter"
depends on I2C_ALGOBIT && ISA depends on I2C_ALGOBIT && ISA
......
...@@ -5,7 +5,6 @@ ...@@ -5,7 +5,6 @@
obj-$(CONFIG_I2C) += i2c-core.o obj-$(CONFIG_I2C) += i2c-core.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o
obj-$(CONFIG_I2C_ELV) += i2c-elv.o
obj-$(CONFIG_I2C_VELLEMAN) += i2c-velleman.o obj-$(CONFIG_I2C_VELLEMAN) += i2c-velleman.o
obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
......
...@@ -46,6 +46,16 @@ config I2C_AMD8111 ...@@ -46,6 +46,16 @@ config I2C_AMD8111
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called i2c-amd8111. will be called i2c-amd8111.
config I2C_ELV
tristate "ELV adapter"
depends on I2C_ALGOBIT && ISA
help
This supports parallel-port I2C adapters called ELV. Say Y if you
own such an adapter.
This support is also available as a module. If so, the module
will be called i2c-elv.
config I2C_I801 config I2C_I801
tristate "Intel 801" tristate "Intel 801"
depends on I2C && PCI && EXPERIMENTAL depends on I2C && PCI && EXPERIMENTAL
......
...@@ -6,6 +6,7 @@ obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o ...@@ -6,6 +6,7 @@ obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o
obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o
obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o
obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
obj-$(CONFIG_I2C_ELV) += i2c-elv.o
obj-$(CONFIG_I2C_I801) += i2c-i801.o obj-$(CONFIG_I2C_I801) += i2c-i801.o
obj-$(CONFIG_I2C_I810) += i2c-i810.o obj-$(CONFIG_I2C_I810) += i2c-i810.o
obj-$(CONFIG_I2C_ISA) += i2c-isa.o obj-$(CONFIG_I2C_ISA) += i2c-isa.o
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment