jme: Adding mii-tool support

Adding mii-tool support for some distribution only have mii-tool
installed by default.
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/jme.c

@@ -2411,8 +2411,37 @@ jme_set_settings(struct net_device *netdev,
 	if (!rc) {
 		if (fdc)
 			jme_reset_link(jme);
-		set_bit(JME_FLAG_SSET, &jme->flags);
 		jme->old_ecmd = *ecmd;
+		set_bit(JME_FLAG_SSET, &jme->flags);
+	}
+
+	return rc;
+}
+
+static int
+jme_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	int rc;
+	struct jme_adapter *jme = netdev_priv(netdev);
+	struct mii_ioctl_data *mii_data = if_mii(rq);
+	unsigned int duplex_chg;
+
+	if (cmd == SIOCSMIIREG) {
+		u16 val = mii_data->val_in;
+		if (!(val & (BMCR_RESET|BMCR_ANENABLE)) &&
+		    (val & BMCR_SPEED1000))
+			return -EINVAL;
+	}
+
+	spin_lock_bh(&jme->phy_lock);
+	rc = generic_mii_ioctl(&jme->mii_if, mii_data, cmd, &duplex_chg);
+	spin_unlock_bh(&jme->phy_lock);
+
+	if (!rc && (cmd == SIOCSMIIREG)) {
+		if (duplex_chg)
+			jme_reset_link(jme);
+		jme_get_settings(netdev, &jme->old_ecmd);
+		set_bit(JME_FLAG_SSET, &jme->flags);
 	}
 
 	return rc;
@@ -2692,6 +2721,7 @@ static const struct net_device_ops jme_netdev_ops = {
 	.ndo_open		= jme_open,
 	.ndo_stop		= jme_close,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_do_ioctl		= jme_ioctl,
 	.ndo_start_xmit		= jme_start_xmit,
 	.ndo_set_mac_address	= jme_set_macaddr,
 	.ndo_set_multicast_list	= jme_set_multi,
@@ -2883,6 +2913,8 @@ jme_init_one(struct pci_dev *pdev,
 		jme->mii_if.supports_gmii = true;
 	else
 		jme->mii_if.supports_gmii = false;
+	jme->mii_if.phy_id_mask = 0x1F;
+	jme->mii_if.reg_num_mask = 0x1F;
 	jme->mii_if.mdio_read = jme_mdio_read;
 	jme->mii_if.mdio_write = jme_mdio_write;