Commit 33744531 authored by Oliver Neukum's avatar Oliver Neukum Committed by Greg Kroah-Hartman

USB: removing ifdefed code from gl620a

as David has objected to the patch against the gl620a driver,
here's a patch implementing David' suggestion of removing the incomplete
ifdefed code from the gl620a driver.
Signed-off-by: default avatarOliver Neukum <oliver@neukum.name>
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
parent ec434e9b
...@@ -79,160 +79,6 @@ struct gl_header { ...@@ -79,160 +79,6 @@ struct gl_header {
struct gl_packet packets; struct gl_packet packets;
}; };
#ifdef GENELINK_ACK
// FIXME: this code is incomplete, not debugged; it doesn't
// handle interrupts correctly; it should use the generic
// status IRQ code (which didn't exist back in 2001).
struct gl_priv {
struct urb *irq_urb;
char irq_buf [INTERRUPT_BUFSIZE];
};
static inline int gl_control_write(struct usbnet *dev, u8 request, u16 value)
{
int retval;
retval = usb_control_msg(dev->udev,
usb_sndctrlpipe(dev->udev, 0),
request,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
value,
0, // index
0, // data buffer
0, // size
USB_CTRL_SET_TIMEOUT);
return retval;
}
static void gl_interrupt_complete(struct urb *urb)
{
int status = urb->status;
switch (status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
__FUNCTION__, status);
return;
default:
dbg("%s - nonzero urb status received: %d",
__FUNCTION__, urb->status);
}
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status)
err("%s - usb_submit_urb failed with result %d",
__FUNCTION__, status);
}
static int gl_interrupt_read(struct usbnet *dev)
{
struct gl_priv *priv = dev->priv_data;
int retval;
// issue usb interrupt read
if (priv && priv->irq_urb) {
// submit urb
if ((retval = usb_submit_urb(priv->irq_urb, GFP_KERNEL)) != 0)
dbg("gl_interrupt_read: submit fail - %X...", retval);
else
dbg("gl_interrupt_read: submit success...");
}
return 0;
}
// check whether another side is connected
static int genelink_check_connect(struct usbnet *dev)
{
int retval;
dbg("genelink_check_connect...");
// detect whether another side is connected
if ((retval = gl_control_write(dev, GENELINK_CONNECT_WRITE, 0)) != 0) {
dbg("%s: genelink_check_connect write fail - %X",
dev->net->name, retval);
return retval;
}
// usb interrupt read to ack another side
if ((retval = gl_interrupt_read(dev)) != 0) {
dbg("%s: genelink_check_connect read fail - %X",
dev->net->name, retval);
return retval;
}
dbg("%s: genelink_check_connect read success", dev->net->name);
return 0;
}
// allocate and initialize the private data for genelink
static int genelink_init(struct usbnet *dev)
{
struct gl_priv *priv;
// allocate the private data structure
if ((priv = kmalloc(sizeof *priv, GFP_KERNEL)) == 0) {
dbg("%s: cannot allocate private data per device",
dev->net->name);
return -ENOMEM;
}
// allocate irq urb
if ((priv->irq_urb = usb_alloc_urb(0, GFP_KERNEL)) == 0) {
dbg("%s: cannot allocate private irq urb per device",
dev->net->name);
kfree(priv);
return -ENOMEM;
}
// fill irq urb
usb_fill_int_urb(priv->irq_urb, dev->udev,
usb_rcvintpipe(dev->udev, GENELINK_INTERRUPT_PIPE),
priv->irq_buf, INTERRUPT_BUFSIZE,
gl_interrupt_complete, 0,
GENELINK_INTERRUPT_INTERVAL);
// set private data pointer
dev->priv_data = priv;
return 0;
}
// release the private data
static int genelink_free(struct usbnet *dev)
{
struct gl_priv *priv = dev->priv_data;
if (!priv)
return 0;
// FIXME: can't cancel here; it's synchronous, and
// should have happened earlier in any case (interrupt
// handling needs to be generic)
// cancel irq urb first
usb_kill_urb(priv->irq_urb);
// free irq urb
usb_free_urb(priv->irq_urb);
// free the private data structure
kfree(priv);
return 0;
}
#endif
static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb) static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{ {
struct gl_header *header; struct gl_header *header;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment