Commit 345e5c8a authored by Peter Korsgaard's avatar Peter Korsgaard Committed by Kumar Gala

powerpc: Add interrupt support to mpc8xxx_gpio

Signed-off-by: default avatarPeter Korsgaard <jacmet@sunsite.dk>
Acked-by: default avatarAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 1ed31d6d
......@@ -11,7 +11,7 @@ Required properties:
83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters (currently unused).
- interrupts : Interrupt mapping for GPIO IRQ (currently unused).
- interrupts : Interrupt mapping for GPIO IRQ.
- interrupt-parent : Phandle for the interrupt controller that
services interrupts for this device.
- gpio-controller : Marks the port as GPIO controller.
......@@ -38,3 +38,23 @@ Example of gpio-controller nodes for a MPC8347 SoC:
See booting-without-of.txt for details of how to specify GPIO
information for devices.
To use GPIO pins as interrupt sources for peripherals, specify the
GPIO controller as the interrupt parent and define GPIO number +
trigger mode using the interrupts property, which is defined like
this:
interrupts = <number trigger>, where:
- number: GPIO pin (0..31)
- trigger: trigger mode:
2 = trigger on falling edge
3 = trigger on both edges
Example of device using this is:
funkyfpga@0 {
compatible = "funky-fpga";
...
interrupts = <4 3>;
interrupt-parent = <&gpio1>;
};
......@@ -16,6 +16,7 @@
#include <linux/of_gpio.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/irq.h>
#define MPC8XXX_GPIO_PINS 32
......@@ -35,6 +36,7 @@ struct mpc8xxx_gpio_chip {
* open drain mode safely
*/
u32 data;
struct irq_host *irq;
};
static inline u32 mpc8xxx_gpio2mask(unsigned int gpio)
......@@ -128,12 +130,136 @@ static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val
return 0;
}
static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
if (mpc8xxx_gc->irq && offset < MPC8XXX_GPIO_PINS)
return irq_create_mapping(mpc8xxx_gc->irq, offset);
else
return -ENXIO;
}
static void mpc8xxx_gpio_irq_cascade(unsigned int irq, struct irq_desc *desc)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_desc_data(desc);
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
unsigned int mask;
mask = in_be32(mm->regs + GPIO_IER) & in_be32(mm->regs + GPIO_IMR);
if (mask)
generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
32 - ffs(mask)));
}
static void mpc8xxx_irq_unmask(unsigned int virq)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_chip_data(virq);
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
unsigned long flags;
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
setbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(virq_to_hw(virq)));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
}
static void mpc8xxx_irq_mask(unsigned int virq)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_chip_data(virq);
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
unsigned long flags;
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
clrbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(virq_to_hw(virq)));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
}
static void mpc8xxx_irq_ack(unsigned int virq)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_chip_data(virq);
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
out_be32(mm->regs + GPIO_IER, mpc8xxx_gpio2mask(virq_to_hw(virq)));
}
static int mpc8xxx_irq_set_type(unsigned int virq, unsigned int flow_type)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_chip_data(virq);
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
unsigned long flags;
switch (flow_type) {
case IRQ_TYPE_EDGE_FALLING:
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
setbits32(mm->regs + GPIO_ICR,
mpc8xxx_gpio2mask(virq_to_hw(virq)));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
break;
case IRQ_TYPE_EDGE_BOTH:
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
clrbits32(mm->regs + GPIO_ICR,
mpc8xxx_gpio2mask(virq_to_hw(virq)));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
break;
default:
return -EINVAL;
}
return 0;
}
static struct irq_chip mpc8xxx_irq_chip = {
.name = "mpc8xxx-gpio",
.unmask = mpc8xxx_irq_unmask,
.mask = mpc8xxx_irq_mask,
.ack = mpc8xxx_irq_ack,
.set_type = mpc8xxx_irq_set_type,
};
static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
set_irq_chip_data(virq, h->host_data);
set_irq_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
set_irq_type(virq, IRQ_TYPE_NONE);
return 0;
}
static int mpc8xxx_gpio_irq_xlate(struct irq_host *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
{
/* interrupt sense values coming from the device tree equal either
* EDGE_FALLING or EDGE_BOTH
*/
*out_hwirq = intspec[0];
*out_flags = intspec[1];
return 0;
}
static struct irq_host_ops mpc8xxx_gpio_irq_ops = {
.map = mpc8xxx_gpio_irq_map,
.xlate = mpc8xxx_gpio_irq_xlate,
};
static void __init mpc8xxx_add_controller(struct device_node *np)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc;
struct of_mm_gpio_chip *mm_gc;
struct of_gpio_chip *of_gc;
struct gpio_chip *gc;
unsigned hwirq;
int ret;
mpc8xxx_gc = kzalloc(sizeof(*mpc8xxx_gc), GFP_KERNEL);
......@@ -158,11 +284,32 @@ static void __init mpc8xxx_add_controller(struct device_node *np)
else
gc->get = mpc8xxx_gpio_get;
gc->set = mpc8xxx_gpio_set;
gc->to_irq = mpc8xxx_gpio_to_irq;
ret = of_mm_gpiochip_add(np, mm_gc);
if (ret)
goto err;
hwirq = irq_of_parse_and_map(np, 0);
if (hwirq == NO_IRQ)
goto skip_irq;
mpc8xxx_gc->irq =
irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, MPC8XXX_GPIO_PINS,
&mpc8xxx_gpio_irq_ops, MPC8XXX_GPIO_PINS);
if (!mpc8xxx_gc->irq)
goto skip_irq;
mpc8xxx_gc->irq->host_data = mpc8xxx_gc;
/* ack and mask all irqs */
out_be32(mm_gc->regs + GPIO_IER, 0xffffffff);
out_be32(mm_gc->regs + GPIO_IMR, 0);
set_irq_data(hwirq, mpc8xxx_gc);
set_irq_chained_handler(hwirq, mpc8xxx_gpio_irq_cascade);
skip_irq:
return;
err:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment