Commit 34d7c390 authored by Uwe Kleine-König's avatar Uwe Kleine-König Committed by Mark Brown

ASoC: improve usage of gpiod API

Since 39b2bbe3 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for
output. Simplify drivers accordingly.

Also there is an *_optional variant that serves well here. The sematics
is slightly changed here by using it as error checking is more strict
now: If GPIOLIB is not enabled an error is returned instead of just
ignoring the gpio. On one hand this is bad for devices that don't "have"
the respective gpio as the driver is failing now. On the other hand
there is no means to assert that this gpio is really not needed or if
only the driver to control it is not available. The latter is a real
reason to fail and so it's defensive to fail here, too.
Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent c517d838
......@@ -938,22 +938,15 @@ int adau1977_probe(struct device *dev, struct regmap *regmap,
adau1977->dvdd_reg = NULL;
}
adau1977->reset_gpio = devm_gpiod_get(dev, "reset");
if (IS_ERR(adau1977->reset_gpio)) {
ret = PTR_ERR(adau1977->reset_gpio);
if (ret != -ENOENT && ret != -ENOSYS)
return PTR_ERR(adau1977->reset_gpio);
adau1977->reset_gpio = NULL;
}
adau1977->reset_gpio = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(adau1977->reset_gpio))
return PTR_ERR(adau1977->reset_gpio);
dev_set_drvdata(dev, adau1977);
if (adau1977->reset_gpio) {
ret = gpiod_direction_output(adau1977->reset_gpio, 0);
if (ret)
return ret;
if (adau1977->reset_gpio)
ndelay(100);
}
ret = adau1977_power_enable(adau1977);
if (ret)
......
......@@ -437,20 +437,13 @@ static int cs35l32_i2c_probe(struct i2c_client *i2c_client,
}
/* Reset the Device */
cs35l32->reset_gpio = devm_gpiod_get(&i2c_client->dev,
"reset-gpios");
if (IS_ERR(cs35l32->reset_gpio)) {
ret = PTR_ERR(cs35l32->reset_gpio);
if (ret != -ENOENT && ret != -ENOSYS)
return ret;
cs35l32->reset_gpio = NULL;
} else {
ret = gpiod_direction_output(cs35l32->reset_gpio, 0);
if (ret)
return ret;
cs35l32->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev,
"reset", GPIOD_OUT_LOW);
if (IS_ERR(cs35l32->reset_gpio))
return PTR_ERR(cs35l32->reset_gpio);
if (cs35l32->reset_gpio)
gpiod_set_value_cansleep(cs35l32->reset_gpio, 1);
}
/* initialize codec */
ret = regmap_read(cs35l32->regmap, CS35L32_DEVID_AB, &reg);
......
......@@ -605,21 +605,14 @@ static int cs4265_i2c_probe(struct i2c_client *i2c_client,
return ret;
}
cs4265->reset_gpio = devm_gpiod_get(&i2c_client->dev,
"reset-gpios");
if (IS_ERR(cs4265->reset_gpio)) {
ret = PTR_ERR(cs4265->reset_gpio);
if (ret != -ENOENT && ret != -ENOSYS)
return ret;
cs4265->reset_gpio = NULL;
} else {
ret = gpiod_direction_output(cs4265->reset_gpio, 0);
if (ret)
return ret;
cs4265->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev,
"reset", GPIOD_OUT_LOW);
if (IS_ERR(cs4265->reset_gpio))
return PTR_ERR(cs4265->reset_gpio);
if (cs4265->reset_gpio) {
mdelay(1);
gpiod_set_value_cansleep(cs4265->reset_gpio, 1);
}
i2c_set_clientdata(i2c_client, cs4265);
......
......@@ -1213,27 +1213,15 @@ static int sta350_i2c_probe(struct i2c_client *i2c,
#endif
/* GPIOs */
sta350->gpiod_nreset = devm_gpiod_get(dev, "reset");
if (IS_ERR(sta350->gpiod_nreset)) {
ret = PTR_ERR(sta350->gpiod_nreset);
if (ret != -ENOENT && ret != -ENOSYS)
return ret;
sta350->gpiod_nreset = NULL;
} else {
gpiod_direction_output(sta350->gpiod_nreset, 0);
}
sta350->gpiod_power_down = devm_gpiod_get(dev, "power-down");
if (IS_ERR(sta350->gpiod_power_down)) {
ret = PTR_ERR(sta350->gpiod_power_down);
if (ret != -ENOENT && ret != -ENOSYS)
return ret;
sta350->gpiod_power_down = NULL;
} else {
gpiod_direction_output(sta350->gpiod_power_down, 0);
}
sta350->gpiod_nreset = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(sta350->gpiod_nreset))
return PTR_ERR(sta350->gpiod_nreset);
sta350->gpiod_power_down = devm_gpiod_get(dev, "power-down",
GPIOD_OUT_LOW);
if (IS_ERR(sta350->gpiod_power_down))
return PTR_ERR(sta350->gpiod_power_down);
/* regulators */
for (i = 0; i < ARRAY_SIZE(sta350->supplies); i++)
......
......@@ -485,16 +485,9 @@ static int tas2552_probe(struct i2c_client *client,
if (data == NULL)
return -ENOMEM;
data->enable_gpio = devm_gpiod_get(dev, "enable");
if (IS_ERR(data->enable_gpio)) {
ret = PTR_ERR(data->enable_gpio);
if (ret != -ENOENT && ret != -ENOSYS)
return ret;
data->enable_gpio = NULL;
} else {
gpiod_direction_output(data->enable_gpio, 0);
}
data->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(data->enable_gpio))
return PTR_ERR(data->enable_gpio);
data->tas2552_client = client;
data->regmap = devm_regmap_init_i2c(client, &tas2552_regmap_config);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment