gpio / ACPI: Add knowledge about pin controllers to acpi_get_gpiod()

The GPIO resources (GpioIo/GpioInt) used in ACPI contain a GPIO number
which is relative to the hardware GPIO controller. Typically this number
can be translated directly to Linux GPIO number because the mapping is
pretty much 1:1.

However, when the GPIO driver is using pins exported by a pin controller
driver via set of GPIO ranges, the mapping might not be 1:1 anymore and
direct translation does not work.

In such cases we need to translate the ACPI GPIO number to be suitable for
the GPIO controller driver in question by checking all the pin controller
GPIO ranges under the given device and using those to get the proper GPIO
number.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/gpio/gpiolib-acpi.c

@@ -11,12 +11,14 @@
  */
 
 #include <linux/errno.h>
+#include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/gpio/driver.h>
 #include <linux/export.h>
 #include <linux/acpi.h>
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
+#include <linux/pinctrl/pinctrl.h>
 
 #include "gpiolib.h"
 
@@ -55,6 +57,58 @@ static int acpi_gpiochip_find(struct gpio_chip *gc, void *data)
 	return ACPI_HANDLE(gc->dev) == data;
 }
 
+#ifdef CONFIG_PINCTRL
+/**
+ * acpi_gpiochip_pin_to_gpio_offset() - translates ACPI GPIO to Linux GPIO
+ * @chip: GPIO chip
+ * @pin: ACPI GPIO pin number from GpioIo/GpioInt resource
+ *
+ * Function takes ACPI GpioIo/GpioInt pin number as a parameter and
+ * translates it to a corresponding offset suitable to be passed to a
+ * GPIO controller driver.
+ *
+ * Typically the returned offset is same as @pin, but if the GPIO
+ * controller uses pin controller and the mapping is not contigous the
+ * offset might be different.
+ */
+static int acpi_gpiochip_pin_to_gpio_offset(struct gpio_chip *chip, int pin)
+{
+	struct gpio_pin_range *pin_range;
+
+	/* If there are no ranges in this chip, use 1:1 mapping */
+	if (list_empty(&chip->pin_ranges))
+		return pin;
+
+	list_for_each_entry(pin_range, &chip->pin_ranges, node) {
+		const struct pinctrl_gpio_range *range = &pin_range->range;
+		int i;
+
+		if (range->pins) {
+			for (i = 0; i < range->npins; i++) {
+				if (range->pins[i] == pin)
+					return range->base + i - chip->base;
+			}
+		} else {
+			if (pin >= range->pin_base &&
+			    pin < range->pin_base + range->npins) {
+				unsigned gpio_base;
+
+				gpio_base = range->base - chip->base;
+				return gpio_base + pin - range->pin_base;
+			}
+		}
+	}
+
+	return -EINVAL;
+}
+#else
+static inline int acpi_gpiochip_pin_to_gpio_offset(struct gpio_chip *chip,
+						   int pin)
+{
+	return pin;
+}
+#endif
+
 /**
  * acpi_get_gpiod() - Translate ACPI GPIO pin to GPIO descriptor usable with GPIO API
  * @path:	ACPI GPIO controller full path name, (e.g. "\\_SB.GPO1")
@@ -69,6 +123,7 @@ static struct gpio_desc *acpi_get_gpiod(char *path, int pin)
 	struct gpio_chip *chip;
 	acpi_handle handle;
 	acpi_status status;
+	int offset;
 
 	status = acpi_get_handle(NULL, path, &handle);
 	if (ACPI_FAILURE(status))
@@ -78,10 +133,11 @@ static struct gpio_desc *acpi_get_gpiod(char *path, int pin)
 	if (!chip)
 		return ERR_PTR(-ENODEV);
 
-	if (pin < 0 || pin > chip->ngpio)
-		return ERR_PTR(-EINVAL);
+	offset = acpi_gpiochip_pin_to_gpio_offset(chip, pin);
+	if (offset < 0)
+		return ERR_PTR(offset);
 
-	return gpiochip_get_desc(chip, pin);
+	return gpiochip_get_desc(chip, offset);
 }
 
 static irqreturn_t acpi_gpio_irq_handler(int irq, void *data)