Commit 35d9c427 authored by Igor M. Liplianin's avatar Igor M. Liplianin Committed by Mauro Carvalho Chehab

V4L/DVB (9012): Add support for DvbWorld 2004 DVB-S2 PCI adapter

Add support for DvbWorld 2004 DVB-S2 PCI adapter.
The card contains dm1105 PCI chip and cx24116 demodulator
Signed-off-by: default avatarIgor M. Liplianin <liplianin@me.by>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 490c8684
......@@ -36,7 +36,7 @@ comment "Supported Pluto2 Adapters"
source "drivers/media/dvb/pluto2/Kconfig"
comment "Supported SDMC DM1105 Adapters"
depends on DVB_CORE && PCI && I2C
depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/dm1105/Kconfig"
comment "Supported DVB Frontends"
......
config DVB_DM1105
tristate "SDMC DM1105 based PCI cards"
depends on DVB_CORE && PCI && I2C
tristate "SDMC DM1105 based PCI cards"
depends on DVB_CORE && PCI && I2C
select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_STV0299 if !DVB_FE_CUSTOMISE
help
Support for cards based on the SDMC DM1105 PCI chip like
DvbWorld 2002
select DVB_CX24116 if !DVB_FE_CUSTOMISE
help
Support for cards based on the SDMC DM1105 PCI chip like
DvbWorld 2002
Since these cards have no MPEG decoder onboard, they transmit
only compressed MPEG data over the PCI bus, so you need
an external software decoder to watch TV on your computer.
Since these cards have no MPEG decoder onboard, they transmit
only compressed MPEG data over the PCI bus, so you need
an external software decoder to watch TV on your computer.
Say Y or M if you own such a device and want to use it.
Say Y or M if you own such a device and want to use it.
......@@ -41,8 +41,8 @@
#include "stv0299.h"
/*#include "stv0288.h"
*#include "si21xx.h"
*#include "stb6000.h"
*#include "cx24116.h"*/
*#include "stb6000.h"*/
#include "cx24116.h"
#include "z0194a.h"
/* ----------------------------------------------- */
......@@ -605,11 +605,11 @@ static struct si21xx_config serit_config = {
.min_delay_ms = 100,
};
#endif /* keep */
static struct cx24116_config serit_sp2633_config = {
.demod_address = 0x55,
};
#endif /* keep */
static int __devinit frontend_init(struct dm1105dvb *dm1105dvb)
{
......@@ -651,15 +651,11 @@ static int __devinit frontend_init(struct dm1105dvb *dm1105dvb)
#endif /* keep */
break;
case PCI_DEVICE_ID_DW2004:
#if 0
dm1105dvb->fe = dvb_attach(
cx24116_attach, &serit_sp2633_config,
&dm1105dvb->i2c_adap);
if (dm1105dvb->fe)
dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage;
#else /* keep */
dev_err(&dm1105dvb->pdev->dev, "needs cx24116 module\n");
#endif /* keep */
break;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment