netdev: octeon_mgmt: Convert to use device tree.

The device tree will supply the register bank base addresses, make
register addressing relative to those.  PHY connection is now
described by the device tree.

The OCTEON_IRQ_MII{0,1} symbols are also removed as they are now
unused and interfere with the irq_domain used for device tree irq
mapping.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/3941/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/cavium-octeon/octeon-irq.c

@@ -1197,7 +1197,6 @@ static void __init octeon_irq_init_ciu(void)
 		octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_TIMER0, 0, i + 52, chip, handle_edge_irq);
 
 	octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB0, 0, 56, chip, handle_level_irq);
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_MII0, 0, 62, chip, handle_level_irq);
 	octeon_irq_set_ciu_mapping(OCTEON_IRQ_BOOTDMA, 0, 63, chip, handle_level_irq);
 
 	/* CIU_1 */
@@ -1206,7 +1205,6 @@ static void __init octeon_irq_init_ciu(void)
 
 	octeon_irq_set_ciu_mapping(OCTEON_IRQ_UART2, 1, 16, chip, handle_level_irq);
 	octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB1, 1, 17, chip, handle_level_irq);
-	octeon_irq_set_ciu_mapping(OCTEON_IRQ_MII1, 1, 18, chip, handle_level_irq);
 
 	gpio_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-gpio");
 	if (gpio_node) {

arch/mips/cavium-octeon/octeon-platform.c

@@ -168,68 +168,6 @@ static int __init octeon_rng_device_init(void)
 }
 device_initcall(octeon_rng_device_init);
 
-/* Octeon mgmt port Ethernet interface.  */
-static int __init octeon_mgmt_device_init(void)
-{
-	struct platform_device *pd;
-	int ret = 0;
-	int port, num_ports;
-
-	struct resource mgmt_port_resource = {
-		.flags	= IORESOURCE_IRQ,
-		.start	= -1,
-		.end	= -1
-	};
-
-	if (!OCTEON_IS_MODEL(OCTEON_CN56XX) && !OCTEON_IS_MODEL(OCTEON_CN52XX))
-		return 0;
-
-	if (OCTEON_IS_MODEL(OCTEON_CN56XX))
-		num_ports = 1;
-	else
-		num_ports = 2;
-
-	for (port = 0; port < num_ports; port++) {
-		pd = platform_device_alloc("octeon_mgmt", port);
-		if (!pd) {
-			ret = -ENOMEM;
-			goto out;
-		}
-		/* No DMA restrictions */
-		pd->dev.coherent_dma_mask = DMA_BIT_MASK(64);
-		pd->dev.dma_mask = &pd->dev.coherent_dma_mask;
-
-		switch (port) {
-		case 0:
-			mgmt_port_resource.start = OCTEON_IRQ_MII0;
-			break;
-		case 1:
-			mgmt_port_resource.start = OCTEON_IRQ_MII1;
-			break;
-		default:
-			BUG();
-		}
-		mgmt_port_resource.end = mgmt_port_resource.start;
-
-		ret = platform_device_add_resources(pd, &mgmt_port_resource, 1);
-
-		if (ret)
-			goto fail;
-
-		ret = platform_device_add(pd);
-		if (ret)
-			goto fail;
-	}
-	return ret;
-fail:
-	platform_device_put(pd);
-
-out:
-	return ret;
-
-}
-device_initcall(octeon_mgmt_device_init);
-
 #ifdef CONFIG_USB
 
 static int __init octeon_ehci_device_init(void)