Commit 374f7739 authored by Russell King's avatar Russell King

NET: sa11x0-ir: indirect handling of SIR and FIR interrupts

Use the same method for doing this as we do for the tx_start functions.
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 3d26db13
......@@ -70,6 +70,7 @@ struct sa1100_irda {
iobuff_t rx_buff;
int (*tx_start)(struct sk_buff *, struct net_device *, struct sa1100_irda *);
irqreturn_t (*irq)(struct net_device *, struct sa1100_irda *);
};
static int sa1100_irda_set_speed(struct sa1100_irda *, int);
......@@ -197,6 +198,8 @@ static int sa1100_irda_fir_tx_start(struct sk_buff *skb, struct net_device *dev,
return NETDEV_TX_OK;
}
static irqreturn_t sa1100_irda_sir_irq(struct net_device *, struct sa1100_irda *);
static irqreturn_t sa1100_irda_fir_irq(struct net_device *, struct sa1100_irda *);
/*
* Set the IrDA communications speed.
......@@ -236,6 +239,7 @@ static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
si->speed = speed;
si->tx_start = sa1100_irda_sir_tx_start;
si->irq = sa1100_irda_sir_irq;
local_irq_restore(flags);
ret = 0;
......@@ -252,6 +256,7 @@ static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
si->speed = speed;
si->tx_start = sa1100_irda_fir_tx_start;
si->irq = sa1100_irda_fir_irq;
if (si->pdata->set_speed)
si->pdata->set_speed(si->dev, speed);
......@@ -304,9 +309,8 @@ sa1100_set_power(struct sa1100_irda *si, unsigned int state)
/*
* HP-SIR format interrupt service routines.
*/
static void sa1100_irda_hpsir_irq(struct net_device *dev)
static irqreturn_t sa1100_irda_sir_irq(struct net_device *dev, struct sa1100_irda *si)
{
struct sa1100_irda *si = netdev_priv(dev);
int status;
status = Ser2UTSR0;
......@@ -395,6 +399,8 @@ static void sa1100_irda_hpsir_irq(struct net_device *dev)
netif_wake_queue(dev);
}
}
return IRQ_HANDLED;
}
static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev)
......@@ -475,10 +481,8 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev
*
* No matter what, we disable RX, process, and the restart RX.
*/
static void sa1100_irda_fir_irq(struct net_device *dev)
static irqreturn_t sa1100_irda_fir_irq(struct net_device *dev, struct sa1100_irda *si)
{
struct sa1100_irda *si = netdev_priv(dev);
/*
* Stop RX DMA
*/
......@@ -520,16 +524,16 @@ static void sa1100_irda_fir_irq(struct net_device *dev)
* No matter what happens, we must restart reception.
*/
sa1100_irda_rx_dma_start(si);
return IRQ_HANDLED;
}
static irqreturn_t sa1100_irda_irq(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
if (IS_FIR(((struct sa1100_irda *)netdev_priv(dev))))
sa1100_irda_fir_irq(dev);
else
sa1100_irda_hpsir_irq(dev);
return IRQ_HANDLED;
struct sa1100_irda *si = netdev_priv(dev);
return si->irq(dev, si);
}
/*
......@@ -728,10 +732,6 @@ static int sa1100_irda_start(struct net_device *dev)
si->speed = 9600;
err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
if (err)
goto err_irq;
err = sa1100_request_dma(DMA_Ser2HSSPRd, "IrDA receive",
NULL, NULL, &si->dma_rx.regs);
if (err)
......@@ -742,11 +742,6 @@ static int sa1100_irda_start(struct net_device *dev)
if (err)
goto err_tx_dma;
/*
* The interrupt must remain disabled for now.
*/
disable_irq(dev->irq);
/*
* Setup the serial port for the specified speed.
*/
......@@ -762,15 +757,21 @@ static int sa1100_irda_start(struct net_device *dev)
if (!si->irlap)
goto err_irlap;
err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
if (err)
goto err_irq;
/*
* Now enable the interrupt and start the queue
*/
si->open = 1;
sa1100_set_power(si, power_level); /* low power mode */
enable_irq(dev->irq);
netif_start_queue(dev);
return 0;
err_irq:
irlap_close(si->irlap);
err_irlap:
si->open = 0;
sa1100_irda_shutdown(si);
......@@ -779,8 +780,6 @@ static int sa1100_irda_start(struct net_device *dev)
err_tx_dma:
sa1100_free_dma(si->dma_rx.regs);
err_rx_dma:
free_irq(dev->irq, dev);
err_irq:
return err;
}
......@@ -789,7 +788,9 @@ static int sa1100_irda_stop(struct net_device *dev)
struct sa1100_irda *si = netdev_priv(dev);
struct sk_buff *skb;
disable_irq(dev->irq);
netif_stop_queue(dev);
si->open = 0;
sa1100_irda_shutdown(si);
/*
......@@ -818,9 +819,6 @@ static int sa1100_irda_stop(struct net_device *dev)
si->irlap = NULL;
}
netif_stop_queue(dev);
si->open = 0;
/*
* Free resources
*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment