Commit 378a2793 authored by Antti Palosaari's avatar Antti Palosaari Committed by Mauro Carvalho Chehab

V4L/DVB (11215): zl10353: add support for Intel CE6230 and Intel CE6231

Add chip IDs and configuration registers needed for Intel CE6230 and
Intel CE6231.
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 14a19c0a
......@@ -572,6 +572,10 @@ static int zl10353_init(struct dvb_frontend *fe)
zl10353_dump_regs(fe);
if (state->config.parallel_ts)
zl10353_reset_attach[2] &= ~0x20;
if (state->config.clock_ctl_1)
zl10353_reset_attach[3] = state->config.clock_ctl_1;
if (state->config.pll_0)
zl10353_reset_attach[4] = state->config.pll_0;
/* Do a "hard" reset if not already done */
if (zl10353_read_register(state, 0x50) != zl10353_reset_attach[1] ||
......@@ -614,6 +618,7 @@ struct dvb_frontend *zl10353_attach(const struct zl10353_config *config,
struct i2c_adapter *i2c)
{
struct zl10353_state *state = NULL;
int id;
/* allocate memory for the internal state */
state = kzalloc(sizeof(struct zl10353_state), GFP_KERNEL);
......@@ -625,7 +630,8 @@ struct dvb_frontend *zl10353_attach(const struct zl10353_config *config,
memcpy(&state->config, config, sizeof(struct zl10353_config));
/* check if the demod is there */
if (zl10353_read_register(state, CHIP_ID) != ID_ZL10353)
id = zl10353_read_register(state, CHIP_ID);
if ((id != ID_ZL10353) && (id != ID_CE6230) && (id != ID_CE6231))
goto error;
/* create dvb_frontend */
......
......@@ -41,6 +41,10 @@ struct zl10353_config
/* set if i2c_gate_ctrl disable is required */
u8 disable_i2c_gate_ctrl:1;
/* clock control registers (0x51-0x54) */
u8 clock_ctl_1; /* default: 0x46 */
u8 pll_0; /* default: 0x15 */
};
#if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE))
......
......@@ -22,7 +22,9 @@
#ifndef _ZL10353_PRIV_
#define _ZL10353_PRIV_
#define ID_ZL10353 0x14
#define ID_ZL10353 0x14 /* Zarlink ZL10353 */
#define ID_CE6230 0x18 /* Intel CE6230 */
#define ID_CE6231 0x19 /* Intel CE6231 */
#define msb(x) (((x) >> 8) & 0xff)
#define lsb(x) ((x) & 0xff)
......@@ -50,6 +52,10 @@ enum zl10353_reg_addr {
TPS_RECEIVED_0 = 0x1E,
TPS_CURRENT_1 = 0x1F,
TPS_CURRENT_0 = 0x20,
CLOCK_CTL_0 = 0x51,
CLOCK_CTL_1 = 0x52,
PLL_0 = 0x53,
PLL_1 = 0x54,
RESET = 0x55,
AGC_TARGET = 0x56,
MCLK_RATIO = 0x5C,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment