Commit 37eb0b16 authored by Jouni Malinen's avatar Jouni Malinen Committed by John W. Linville

cfg80211/mac80211: Use more generic bitrate mask for rate control

Extend struct cfg80211_bitrate_mask to actually use a bitfield mask
instead of just a single fixed or maximum rate index. This change
itself does not modify the behavior (except for debugfs files), but it
prepares cfg80211 and mac80211 for a new nl80211 command for setting
which rates can be used in TX rate control.

Since frames are now going through the rate control algorithm
unconditionally, the internal IEEE80211_TX_INTFL_RCALGO flag can now
be removed. The RC implementations can use the rate_idx_mask value to
optimize their behavior if only a single rate is enabled.

The old max_rate_idx in struct ieee80211_tx_rate_control is maintained
(but commented as deprecated) for backwards compatibility with existing
RC implementations. Once these implementations have been updated to
use the more generic rate_idx_mask, the max_rate_idx value can be
removed.
Signed-off-by: default avatarJouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent e00cfce0
......@@ -857,20 +857,11 @@ enum tx_power_setting {
* cfg80211_bitrate_mask - masks for bitrate control
*/
struct cfg80211_bitrate_mask {
/*
* As discussed in Berlin, this struct really
* should look like this:
struct {
u32 legacy;
u8 mcs[IEEE80211_HT_MCS_MASK_LEN];
/* TODO: add support for masking MCS rates; e.g.: */
/* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */
} control[IEEE80211_NUM_BANDS];
* Since we can always fix in-kernel users, let's keep
* it simpler for now:
*/
u32 fixed; /* fixed bitrate, 0 == not fixed */
u32 maxrate; /* in kbps, 0 == no limit */
};
/**
* struct cfg80211_pmksa - PMK Security Association
......
......@@ -255,9 +255,6 @@ struct ieee80211_bss_conf {
* @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be
* set by rate control algorithms to indicate probe rate, will
* be cleared for fragmented frames (except on the last fragment)
* @IEEE80211_TX_INTFL_RCALGO: mac80211 internal flag, do not test or
* set this flag in the driver; indicates that the rate control
* algorithm was used and should be notified of TX status
* @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211,
* used to indicate that a pending frame requires TX processing before
* it can be sent out.
......@@ -287,7 +284,6 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_STAT_AMPDU = BIT(10),
IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11),
IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12),
IEEE80211_TX_INTFL_RCALGO = BIT(13),
IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14),
IEEE80211_TX_INTFL_RETRIED = BIT(15),
IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16),
......@@ -2297,6 +2293,9 @@ enum rate_control_changed {
* @short_preamble: whether mac80211 will request short-preamble transmission
* if the selected rate supports it
* @max_rate_idx: user-requested maximum rate (not MCS for now)
* (deprecated; this will be removed once drivers get updated to use
* rate_idx_mask)
* @rate_idx_mask: user-requested rate mask (not MCS for now)
* @skb: the skb that will be transmitted, the control information in it needs
* to be filled in
* @ap: whether this frame is sent out in AP mode
......@@ -2309,6 +2308,7 @@ struct ieee80211_tx_rate_control {
struct ieee80211_tx_rate reported_rate;
bool rts, short_preamble;
u8 max_rate_idx;
u32 rate_idx_mask;
bool ap;
};
......
......@@ -1406,8 +1406,6 @@ static int ieee80211_set_bitrate_mask(struct wiphy *wiphy,
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
int i;
u32 target_rate;
struct ieee80211_supported_band *sband;
/*
* This _could_ be supported by providing a hook for
......@@ -1417,35 +1415,11 @@ static int ieee80211_set_bitrate_mask(struct wiphy *wiphy,
if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
return -EOPNOTSUPP;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
/*
* target_rate = -1, rate->fixed = 0 means auto only, so use all rates
* target_rate = X, rate->fixed = 1 means only rate X
* target_rate = X, rate->fixed = 0 means all rates <= X
*/
sdata->max_ratectrl_rateidx = -1;
sdata->force_unicast_rateidx = -1;
if (mask->fixed)
target_rate = mask->fixed / 100;
else if (mask->maxrate)
target_rate = mask->maxrate / 100;
else
return 0;
for (i = 0; i < IEEE80211_NUM_BANDS; i++)
sdata->rc_rateidx_mask[i] = mask->control[i].legacy;
for (i = 0; i< sband->n_bitrates; i++) {
if (target_rate != sband->bitrates[i].bitrate)
continue;
/* requested bitrate found */
sdata->max_ratectrl_rateidx = i;
if (mask->fixed)
sdata->force_unicast_rateidx = i;
return 0;
}
return -EINVAL;
return 0;
}
static int ieee80211_remain_on_channel(struct wiphy *wiphy,
......
......@@ -127,8 +127,10 @@ __IEEE80211_IF_FILE(name, ieee80211_if_write_##name)
/* common attributes */
IEEE80211_IF_FILE(drop_unencrypted, drop_unencrypted, DEC);
IEEE80211_IF_FILE(force_unicast_rateidx, force_unicast_rateidx, DEC);
IEEE80211_IF_FILE(max_ratectrl_rateidx, max_ratectrl_rateidx, DEC);
IEEE80211_IF_FILE(rc_rateidx_mask_2ghz, rc_rateidx_mask[IEEE80211_BAND_2GHZ],
HEX);
IEEE80211_IF_FILE(rc_rateidx_mask_5ghz, rc_rateidx_mask[IEEE80211_BAND_5GHZ],
HEX);
/* STA attributes */
IEEE80211_IF_FILE(bssid, u.mgd.bssid, MAC);
......@@ -264,8 +266,8 @@ IEEE80211_IF_FILE(dot11MeshHWMPRootMode,
static void add_sta_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted, sta);
DEBUGFS_ADD(force_unicast_rateidx, sta);
DEBUGFS_ADD(max_ratectrl_rateidx, sta);
DEBUGFS_ADD(rc_rateidx_mask_2ghz, sta);
DEBUGFS_ADD(rc_rateidx_mask_5ghz, sta);
DEBUGFS_ADD(bssid, sta);
DEBUGFS_ADD(aid, sta);
......@@ -275,8 +277,8 @@ static void add_sta_files(struct ieee80211_sub_if_data *sdata)
static void add_ap_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted, ap);
DEBUGFS_ADD(force_unicast_rateidx, ap);
DEBUGFS_ADD(max_ratectrl_rateidx, ap);
DEBUGFS_ADD(rc_rateidx_mask_2ghz, ap);
DEBUGFS_ADD(rc_rateidx_mask_5ghz, ap);
DEBUGFS_ADD(num_sta_ps, ap);
DEBUGFS_ADD(dtim_count, ap);
......@@ -286,8 +288,8 @@ static void add_ap_files(struct ieee80211_sub_if_data *sdata)
static void add_wds_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted, wds);
DEBUGFS_ADD(force_unicast_rateidx, wds);
DEBUGFS_ADD(max_ratectrl_rateidx, wds);
DEBUGFS_ADD(rc_rateidx_mask_2ghz, wds);
DEBUGFS_ADD(rc_rateidx_mask_5ghz, wds);
DEBUGFS_ADD(peer, wds);
}
......@@ -295,8 +297,8 @@ static void add_wds_files(struct ieee80211_sub_if_data *sdata)
static void add_vlan_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted, vlan);
DEBUGFS_ADD(force_unicast_rateidx, vlan);
DEBUGFS_ADD(max_ratectrl_rateidx, vlan);
DEBUGFS_ADD(rc_rateidx_mask_2ghz, vlan);
DEBUGFS_ADD(rc_rateidx_mask_5ghz, vlan);
}
static void add_monitor_files(struct ieee80211_sub_if_data *sdata)
......
......@@ -494,8 +494,8 @@ struct ieee80211_sub_if_data {
*/
struct ieee80211_if_ap *bss;
int force_unicast_rateidx; /* forced TX rateidx for unicast frames */
int max_ratectrl_rateidx; /* max TX rateidx for rate control */
/* bitmap of allowed (non-MCS) rate indexes for rate control */
u32 rc_rateidx_mask[IEEE80211_NUM_BANDS];
union {
struct ieee80211_if_ap ap;
......
......@@ -856,8 +856,12 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
INIT_LIST_HEAD(&sdata->key_list);
sdata->force_unicast_rateidx = -1;
sdata->max_ratectrl_rateidx = -1;
for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
struct ieee80211_supported_band *sband;
sband = local->hw.wiphy->bands[i];
sdata->rc_rateidx_mask[i] =
sband ? (1 << sband->n_bitrates) - 1 : 0;
}
/* setup type-dependent data */
ieee80211_setup_sdata(sdata, type);
......
......@@ -249,6 +249,38 @@ bool rate_control_send_low(struct ieee80211_sta *sta,
}
EXPORT_SYMBOL(rate_control_send_low);
static void rate_idx_match_mask(struct ieee80211_tx_rate *rate,
int n_bitrates, u32 mask)
{
int j;
/* See whether the selected rate or anything below it is allowed. */
for (j = rate->idx; j >= 0; j--) {
if (mask & (1 << j)) {
/* Okay, found a suitable rate. Use it. */
rate->idx = j;
return;
}
}
/* Try to find a higher rate that would be allowed */
for (j = rate->idx + 1; j < n_bitrates; j++) {
if (mask & (1 << j)) {
/* Okay, found a suitable rate. Use it. */
rate->idx = j;
return;
}
}
/*
* Uh.. No suitable rate exists. This should not really happen with
* sane TX rate mask configurations. However, should someone manage to
* configure supported rates and TX rate mask in incompatible way,
* allow the frame to be transmitted with whatever the rate control
* selected.
*/
}
void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta,
struct ieee80211_tx_rate_control *txrc)
......@@ -258,6 +290,7 @@ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
struct ieee80211_sta *ista = NULL;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb);
int i;
u32 mask;
if (sta) {
ista = &sta->sta;
......@@ -270,23 +303,31 @@ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
info->control.rates[i].count = 1;
}
if (sta && sdata->force_unicast_rateidx > -1) {
info->control.rates[0].idx = sdata->force_unicast_rateidx;
} else {
ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
info->flags |= IEEE80211_TX_INTFL_RCALGO;
}
ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
/*
* try to enforce the maximum rate the user wanted
* Try to enforce the rateidx mask the user wanted. skip this if the
* default mask (allow all rates) is used to save some processing for
* the common case.
*/
if (sdata->max_ratectrl_rateidx > -1)
mask = sdata->rc_rateidx_mask[info->band];
if (mask != (1 << txrc->sband->n_bitrates) - 1) {
if (sta) {
/* Filter out rates that the STA does not support */
mask &= sta->sta.supp_rates[info->band];
}
/*
* Make sure the rate index selected for each TX rate is
* included in the configured mask and change the rate indexes
* if needed.
*/
for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
/* Rate masking supports only legacy rates for now */
if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS)
continue;
info->control.rates[i].idx =
min_t(s8, info->control.rates[i].idx,
sdata->max_ratectrl_rateidx);
rate_idx_match_mask(&info->control.rates[i],
txrc->sband->n_bitrates, mask);
}
}
BUG_ON(info->control.rates[0].idx < 0);
......
......@@ -44,10 +44,7 @@ static inline void rate_control_tx_status(struct ieee80211_local *local,
struct rate_control_ref *ref = local->rate_ctrl;
struct ieee80211_sta *ista = &sta->sta;
void *priv_sta = sta->rate_ctrl_priv;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (likely(info->flags & IEEE80211_TX_INTFL_RCALGO))
ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb);
ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb);
}
......
......@@ -519,7 +519,11 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
txrc.bss_conf = &tx->sdata->vif.bss_conf;
txrc.skb = tx->skb;
txrc.reported_rate.idx = -1;
txrc.max_rate_idx = tx->sdata->max_ratectrl_rateidx;
txrc.rate_idx_mask = tx->sdata->rc_rateidx_mask[tx->channel->band];
if (txrc.rate_idx_mask == (1 << sband->n_bitrates) - 1)
txrc.max_rate_idx = -1;
else
txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1;
txrc.ap = tx->sdata->vif.type == NL80211_IFTYPE_AP;
/* set up RTS protection if desired */
......@@ -2178,7 +2182,11 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
txrc.bss_conf = &sdata->vif.bss_conf;
txrc.skb = skb;
txrc.reported_rate.idx = -1;
txrc.max_rate_idx = sdata->max_ratectrl_rateidx;
txrc.rate_idx_mask = sdata->rc_rateidx_mask[band];
if (txrc.rate_idx_mask == (1 << sband->n_bitrates) - 1)
txrc.max_rate_idx = -1;
else
txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1;
txrc.ap = true;
rate_control_get_rate(sdata, NULL, &txrc);
......
......@@ -1204,21 +1204,47 @@ int cfg80211_wext_siwrate(struct net_device *dev,
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
struct cfg80211_bitrate_mask mask;
u32 fixed, maxrate;
struct ieee80211_supported_band *sband;
int band, ridx;
bool match = false;
if (!rdev->ops->set_bitrate_mask)
return -EOPNOTSUPP;
mask.fixed = 0;
mask.maxrate = 0;
memset(&mask, 0, sizeof(mask));
fixed = 0;
maxrate = 0;
if (rate->value < 0) {
/* nothing */
} else if (rate->fixed) {
mask.fixed = rate->value / 1000; /* kbps */
fixed = rate->value / 100000;
} else {
mask.maxrate = rate->value / 1000; /* kbps */
maxrate = rate->value / 100000;
}
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
sband = wdev->wiphy->bands[band];
if (sband == NULL)
continue;
for (ridx = 0; ridx < sband->n_bitrates; ridx++) {
struct ieee80211_rate *srate = &sband->bitrates[ridx];
if (fixed == srate->bitrate) {
mask.control[band].legacy = 1 << ridx;
match = true;
break;
}
if (srate->bitrate <= maxrate) {
mask.control[band].legacy |= 1 << ridx;
match = true;
}
}
}
if (!match)
return -EINVAL;
return rdev->ops->set_bitrate_mask(wdev->wiphy, dev, NULL, &mask);
}
EXPORT_SYMBOL_GPL(cfg80211_wext_siwrate);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment