drm: bridge/dw_hdmi: add connector mode forcing
When connected to HDMI sources, some DVI monitors de-assert their HPD signal and TDMS loads for one seconds every four seconds when there is no signal present on the connection. Unfortunately, this behaviour is indistinguishable from a proper HDMI setup with an AV receiver in the path to the display: the HDMI spec requires us to detect HPD deassertions as short as 100ms, which indicate that the EDID has changed. Since it is possible to connect a DVI monitor to an AV receiver and then to a HDMI source, merely working around this by detecting the lack of HDMI vendor block in the EDID is insufficient - the AV receiver is at liberty to modify the EDID as it sees fit, and it will place its own parameters into the EDID including the HDMI vendor block. DRM has support for forcing the state of a connector, which we should implement to allow us to work around these broken DVI monitors - we can tell DRM to force the connection state to indicate that there is always a device connected to work around this problem. Although this requires manual configuration, it is better than nothing at all. When a forced connection state has been set, there is no point handling our RXSENSE interrupts, so disable them in this circumstance. Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Showing
Please register or sign in to comment