Commit 383ffda2 authored by Kukjin Kim's avatar Kukjin Kim

ARM: EXYNOS: no more support non-DT for EXYNOS SoCs

As we discussed in mailing list, non-DT for EXYNOS SoCs will not be
supported from v3.11. This patch removes regarding files for non-DT
including board files and defconfig.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 317ddd25
...@@ -84,329 +84,11 @@ config SOC_EXYNOS5440 ...@@ -84,329 +84,11 @@ config SOC_EXYNOS5440
help help
Enable EXYNOS5440 SoC support Enable EXYNOS5440 SoC support
config EXYNOS_ATAGS
bool "ATAGS based boot for EXYNOS (deprecated)"
depends on !ARCH_MULTIPLATFORM
depends on ATAGS
default y
help
The EXYNOS platform is moving towards being completely probed
through device tree. This enables support for board files using
the traditional ATAGS boot format.
Note that this option is not available for multiplatform builds.
if EXYNOS_ATAGS
config EXYNOS_DEV_DMA
bool
help
Compile in amba device definitions for DMA controller
config EXYNOS4_DEV_AHCI
bool
help
Compile in platform device definitions for AHCI
config EXYNOS4_SETUP_FIMD0
bool
help
Common setup code for FIMD0.
config EXYNOS4_DEV_USB_OHCI
bool
help
Compile in platform device definition for USB OHCI
config EXYNOS4_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
config EXYNOS4_SETUP_I2C2
bool
help
Common setup code for i2c bus 2.
config EXYNOS4_SETUP_I2C3
bool
help
Common setup code for i2c bus 3.
config EXYNOS4_SETUP_I2C4
bool
help
Common setup code for i2c bus 4.
config EXYNOS4_SETUP_I2C5
bool
help
Common setup code for i2c bus 5.
config EXYNOS4_SETUP_I2C6
bool
help
Common setup code for i2c bus 6.
config EXYNOS4_SETUP_I2C7
bool
help
Common setup code for i2c bus 7.
config EXYNOS4_SETUP_KEYPAD
bool
help
Common setup code for keypad.
config EXYNOS4_SETUP_SDHCI
bool
select EXYNOS4_SETUP_SDHCI_GPIO
help
Internal helper functions for EXYNOS4 based SDHCI systems.
config EXYNOS4_SETUP_SDHCI_GPIO
bool
help
Common setup code for SDHCI gpio.
config EXYNOS4_SETUP_FIMC
bool
help
Common setup code for the camera interfaces.
config EXYNOS4_SETUP_USB_PHY
bool
help
Common setup code for USB PHY controller
config EXYNOS_SETUP_SPI
bool
help
Common setup code for SPI GPIO configurations.
# machine support
if ARCH_EXYNOS4
comment "EXYNOS4210 Boards"
config MACH_SMDKC210
bool "SMDKC210"
select MACH_SMDKV310
help
Machine support for Samsung SMDKC210
config MACH_SMDKV310
bool "SMDKV310"
select CPU_EXYNOS4210
select EXYNOS4_DEV_AHCI
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_TV
select S5P_DEV_USB_EHCI
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
help
Machine support for Samsung SMDKV310
config MACH_ARMLEX4210
bool "ARMLEX4210"
select CPU_EXYNOS4210
select EXYNOS4_DEV_AHCI
select EXYNOS4_SETUP_SDHCI
select EXYNOS_DEV_DMA
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_RTC
select S3C_DEV_WDT
help
Machine support for Samsung ARMLEX4210 based on EXYNOS4210
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CLKSRC_MMIO
select CLKSRC_SAMSUNG_PWM
select CPU_EXYNOS4210
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_SYSMMU
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S3C_DEV_USB_HSOTG
select S5P_DEV_CSIS0
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_ONENAND
select S5P_DEV_TV
select S5P_GPIO_INT
select S5P_SETUP_MIPIPHY
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
config MACH_NURI
bool "Mobile NURI Board"
select CPU_EXYNOS4210
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_I2C6
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S3C_DEV_I2C6
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_CSIS0
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
select S5P_GPIO_INT
select S5P_SETUP_MIPIPHY
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.
config MACH_ORIGEN
bool "ORIGEN"
select CPU_EXYNOS4210
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_G2D
select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_JPEG
select S5P_DEV_MFC
select S5P_DEV_TV
select S5P_DEV_USB_EHCI
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
help
Machine support for ORIGEN based on Samsung EXYNOS4210
comment "EXYNOS4212 Boards"
config MACH_SMDK4212
bool "SMDK4212"
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select EXYNOS_DEV_DMA
select EXYNOS_DEV_SYSMMU
select S3C24XX_PWM
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C7
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
select S5P_DEV_FIMD0
select S5P_DEV_MFC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select SOC_EXYNOS4212
help
Machine support for Samsung SMDK4212
comment "EXYNOS4412 Boards"
config MACH_SMDK4412
bool "SMDK4412"
select MACH_SMDK4212
select SOC_EXYNOS4412
help
Machine support for Samsung SMDK4412
endif
endif
comment "Flattened Device Tree based board for EXYNOS SoCs" comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree" bool "Samsung Exynos4 Machine using device tree"
default y
depends on ARCH_EXYNOS4 depends on ARCH_EXYNOS4
select ARM_AMBA select ARM_AMBA
select CLKSRC_OF select CLKSRC_OF
......
...@@ -32,16 +32,6 @@ AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) ...@@ -32,16 +32,6 @@ AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec)
# machine support # machine support
obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o
obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
obj-$(CONFIG_MACH_NURI) += mach-nuri.o
obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o
...@@ -49,21 +39,5 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o ...@@ -49,21 +39,5 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o
obj-y += dev-uart.o obj-y += dev-uart.o
obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o
obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C4) += setup-i2c4.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o
obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
obj-$(CONFIG_EXYNOS_SETUP_SPI) += setup-spi.o
...@@ -353,7 +353,6 @@ void __init exynos_init_late(void) ...@@ -353,7 +353,6 @@ void __init exynos_init_late(void)
exynos_pm_late_initcall(); exynos_pm_late_initcall();
} }
#ifdef CONFIG_OF
int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
int depth, void *data) int depth, void *data)
{ {
...@@ -376,7 +375,6 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, ...@@ -376,7 +375,6 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
iotable_init(&iodesc, 1); iotable_init(&iodesc, 1);
return 1; return 1;
} }
#endif
/* /*
* exynos_map_io * exynos_map_io
...@@ -388,11 +386,9 @@ void __init exynos_init_io(struct map_desc *mach_desc, int size) ...@@ -388,11 +386,9 @@ void __init exynos_init_io(struct map_desc *mach_desc, int size)
{ {
debug_ll_io_init(); debug_ll_io_init();
#ifdef CONFIG_OF
if (initial_boot_params) if (initial_boot_params)
of_scan_flat_dt(exynos_fdt_map_chipid, NULL); of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
else else
#endif
iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc)); iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
if (mach_desc) if (mach_desc)
...@@ -475,10 +471,8 @@ void __init exynos_init_time(void) ...@@ -475,10 +471,8 @@ void __init exynos_init_time(void)
}; };
if (of_have_populated_dt()) { if (of_have_populated_dt()) {
#ifdef CONFIG_OF
of_clk_init(NULL); of_clk_init(NULL);
clocksource_of_init(); clocksource_of_init();
#endif
} else { } else {
/* todo: remove after migrating legacy E4 platforms to dt */ /* todo: remove after migrating legacy E4 platforms to dt */
#ifdef CONFIG_ARCH_EXYNOS4 #ifdef CONFIG_ARCH_EXYNOS4
...@@ -517,10 +511,8 @@ void __init exynos4_init_irq(void) ...@@ -517,10 +511,8 @@ void __init exynos4_init_irq(void)
if (!of_have_populated_dt()) if (!of_have_populated_dt())
gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL); gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL);
#ifdef CONFIG_OF
else else
irqchip_init(); irqchip_init();
#endif
if (!of_have_populated_dt()) if (!of_have_populated_dt())
combiner_init(S5P_VA_COMBINER_BASE, NULL, combiner_init(S5P_VA_COMBINER_BASE, NULL,
...@@ -531,9 +523,7 @@ void __init exynos4_init_irq(void) ...@@ -531,9 +523,7 @@ void __init exynos4_init_irq(void)
void __init exynos5_init_irq(void) void __init exynos5_init_irq(void)
{ {
#ifdef CONFIG_OF
irqchip_init(); irqchip_init();
#endif
gic_arch_extn.irq_set_wake = s3c_irq_wake; gic_arch_extn.irq_set_wake = s3c_irq_wake;
} }
......
/* linux/arch/arm/mach-exynos4/dev-ahci.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 - AHCI support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/ahci_platform.h>
#include <plat/cpu.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-pmu.h>
/* PHY Control Register */
#define SATA_CTRL0 0x0
/* PHY Link Control Register */
#define SATA_CTRL1 0x4
/* PHY Status Register */
#define SATA_PHY_STATUS 0x8
#define SATA_CTRL0_RX_DATA_VALID(x) (x << 27)
#define SATA_CTRL0_SPEED_MODE (1 << 26)
#define SATA_CTRL0_M_PHY_CAL (1 << 19)
#define SATA_CTRL0_PHY_CMU_RST_N (1 << 10)
#define SATA_CTRL0_M_PHY_LN_RST_N (1 << 9)
#define SATA_CTRL0_PHY_POR_N (1 << 8)
#define SATA_CTRL1_RST_PMALIVE_N (1 << 8)
#define SATA_CTRL1_RST_RXOOB_N (1 << 7)
#define SATA_CTRL1_RST_RX_N (1 << 6)
#define SATA_CTRL1_RST_TX_N (1 << 5)
#define SATA_PHY_STATUS_CMU_OK (1 << 18)
#define SATA_PHY_STATUS_LANE_OK (1 << 16)
#define LANE0 0x200
#define COM_LANE 0xA00
#define HOST_PORTS_IMPL 0xC
#define SCLK_SATA_FREQ (67 * MHZ)
static void __iomem *phy_base, *phy_ctrl;
struct phy_reg {
u8 reg;
u8 val;
};
/* SATA PHY setup */
static const struct phy_reg exynos4_sataphy_cmu[] = {
{ 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 },
{ 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 },
{ 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 },
{ 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 },
{ 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 },
{ 0x6b, 0xc8 }, { 0x6c, 0x06 },
};
static const struct phy_reg exynos4_sataphy_lane[] = {
{ 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 },
{ 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 },
{ 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e },
{ 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 },
{ 0x51, 0x0f },
};
static const struct phy_reg exynos4_sataphy_comlane[] = {
{ 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d },
{ 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 },
{ 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 },
{ 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 },
{ 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 },
{ 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 },
{ 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 },
{ 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d },
{ 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 },
{ 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 },
{ 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 },
{ 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff },
{ 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 },
{ 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 },
};
static int wait_for_phy_ready(void __iomem *reg, unsigned long bit)
{
unsigned long timeout;
/* wait for maximum of 3 sec */
timeout = jiffies + msecs_to_jiffies(3000);
while (!(__raw_readl(reg) & bit)) {
if (time_after(jiffies, timeout))
return -1;
cpu_relax();
}
return 0;
}
static int ahci_phy_init(void __iomem *mmio)
{
int i, ctrl0;
for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++)
__raw_writeb(exynos4_sataphy_cmu[i].val,
phy_base + (exynos4_sataphy_cmu[i].reg * 4));
for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++)
__raw_writeb(exynos4_sataphy_lane[i].val,
phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4);
for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++)
__raw_writeb(exynos4_sataphy_comlane[i].val,
phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4);
__raw_writeb(0x07, phy_base);
ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N;
__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
SATA_PHY_STATUS_CMU_OK) < 0) {
printk(KERN_ERR "PHY CMU not ready\n");
return -EBUSY;
}
__raw_writeb(0x03, phy_base + (COM_LANE * 4));
ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N;
__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
SATA_PHY_STATUS_LANE_OK) < 0) {
printk(KERN_ERR "PHY LANE not ready\n");
return -EBUSY;
}
ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
ctrl0 |= SATA_CTRL0_M_PHY_CAL;
__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
return 0;
}
static int exynos4_ahci_init(struct device *dev, void __iomem *mmio)
{
struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata;
int val, ret;
phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K);
if (!phy_base) {
dev_err(dev, "failed to allocate memory for SATA PHY\n");
return -ENOMEM;
}
phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16);
if (!phy_ctrl) {
dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n");
ret = -ENOMEM;
goto err1;
}
clk_sata = clk_get(dev, "sata");
if (IS_ERR(clk_sata)) {
dev_err(dev, "failed to get sata clock\n");
ret = PTR_ERR(clk_sata);
clk_sata = NULL;
goto err2;
}
clk_enable(clk_sata);
clk_sataphy = clk_get(dev, "sataphy");
if (IS_ERR(clk_sataphy)) {
dev_err(dev, "failed to get sataphy clock\n");
ret = PTR_ERR(clk_sataphy);
clk_sataphy = NULL;
goto err3;
}
clk_enable(clk_sataphy);
clk_sclk_sata = clk_get(dev, "sclk_sata");
if (IS_ERR(clk_sclk_sata)) {
dev_err(dev, "failed to get sclk_sata\n");
ret = PTR_ERR(clk_sclk_sata);
clk_sclk_sata = NULL;
goto err4;
}
clk_enable(clk_sclk_sata);
clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ);
__raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL);
/* Enable PHY link control */
val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N |
SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N;
__raw_writel(val, phy_ctrl + SATA_CTRL1);
/* Set communication speed as 3Gbps and enable PHY power */
val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE |
SATA_CTRL0_PHY_POR_N;
__raw_writel(val, phy_ctrl + SATA_CTRL0);
/* Port0 is available */
__raw_writel(0x1, mmio + HOST_PORTS_IMPL);
return ahci_phy_init(mmio);
err4:
clk_disable(clk_sataphy);
clk_put(clk_sataphy);
err3:
clk_disable(clk_sata);
clk_put(clk_sata);
err2:
iounmap(phy_ctrl);
err1:
iounmap(phy_base);
return ret;
}
static struct ahci_platform_data exynos4_ahci_pdata = {
.init = exynos4_ahci_init,
};
static struct resource exynos4_ahci_resource[] = {
[0] = DEFINE_RES_MEM(EXYNOS4_PA_SATA, SZ_64K),
[1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_SATA),
};
static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32);
struct platform_device exynos4_device_ahci = {
.name = "ahci",
.id = -1,
.resource = exynos4_ahci_resource,
.num_resources = ARRAY_SIZE(exynos4_ahci_resource),
.dev = {
.platform_data = &exynos4_ahci_pdata,
.dma_mask = &exynos4_ahci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
/* linux/arch/arm/mach-exynos/dev-ohci.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS - OHCI support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/platform_data/usb-ohci-exynos.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <plat/devs.h>
#include <plat/usb-phy.h>
static struct resource exynos4_ohci_resource[] = {
[0] = DEFINE_RES_MEM(EXYNOS4_PA_OHCI, SZ_256),
[1] = DEFINE_RES_IRQ(IRQ_USB_HOST),
};
static u64 exynos4_ohci_dma_mask = DMA_BIT_MASK(32);
struct platform_device exynos4_device_ohci = {
.name = "exynos-ohci",
.id = -1,
.num_resources = ARRAY_SIZE(exynos4_ohci_resource),
.resource = exynos4_ohci_resource,
.dev = {
.dma_mask = &exynos4_ohci_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
}
};
void __init exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd)
{
struct exynos4_ohci_platdata *npd;
npd = s3c_set_platdata(pd, sizeof(struct exynos4_ohci_platdata),
&exynos4_device_ohci);
if (!npd->phy_init)
npd->phy_init = s5p_usb_phy_init;
if (!npd->phy_exit)
npd->phy_exit = s5p_usb_phy_exit;
}
/* linux/arch/arm/mach-exynos4/dma.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/dma-mapping.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl330.h>
#include <linux/of.h>
#include <asm/irq.h>
#include <plat/devs.h>
#include <plat/irqs.h>
#include <plat/cpu.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/dma.h>
static u8 exynos4210_pdma0_peri[] = {
DMACH_PCM0_RX,
DMACH_PCM0_TX,
DMACH_PCM2_RX,
DMACH_PCM2_TX,
DMACH_MSM_REQ0,
DMACH_MSM_REQ2,
DMACH_SPI0_RX,
DMACH_SPI0_TX,
DMACH_SPI2_RX,
DMACH_SPI2_TX,
DMACH_I2S0S_TX,
DMACH_I2S0_RX,
DMACH_I2S0_TX,
DMACH_I2S2_RX,
DMACH_I2S2_TX,
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART2_RX,
DMACH_UART2_TX,
DMACH_UART4_RX,
DMACH_UART4_TX,
DMACH_SLIMBUS0_RX,
DMACH_SLIMBUS0_TX,
DMACH_SLIMBUS2_RX,
DMACH_SLIMBUS2_TX,
DMACH_SLIMBUS4_RX,
DMACH_SLIMBUS4_TX,
DMACH_AC97_MICIN,
DMACH_AC97_PCMIN,
DMACH_AC97_PCMOUT,
};
static u8 exynos4212_pdma0_peri[] = {
DMACH_PCM0_RX,
DMACH_PCM0_TX,
DMACH_PCM2_RX,
DMACH_PCM2_TX,
DMACH_MIPI_HSI0,
DMACH_MIPI_HSI1,
DMACH_SPI0_RX,
DMACH_SPI0_TX,
DMACH_SPI2_RX,
DMACH_SPI2_TX,
DMACH_I2S0S_TX,
DMACH_I2S0_RX,
DMACH_I2S0_TX,
DMACH_I2S2_RX,
DMACH_I2S2_TX,
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART2_RX,
DMACH_UART2_TX,
DMACH_UART4_RX,
DMACH_UART4_TX,
DMACH_SLIMBUS0_RX,
DMACH_SLIMBUS0_TX,
DMACH_SLIMBUS2_RX,
DMACH_SLIMBUS2_TX,
DMACH_SLIMBUS4_RX,
DMACH_SLIMBUS4_TX,
DMACH_AC97_MICIN,
DMACH_AC97_PCMIN,
DMACH_AC97_PCMOUT,
DMACH_MIPI_HSI4,
DMACH_MIPI_HSI5,
};
static u8 exynos5250_pdma0_peri[] = {
DMACH_PCM0_RX,
DMACH_PCM0_TX,
DMACH_PCM2_RX,
DMACH_PCM2_TX,
DMACH_SPI0_RX,
DMACH_SPI0_TX,
DMACH_SPI2_RX,
DMACH_SPI2_TX,
DMACH_I2S0S_TX,
DMACH_I2S0_RX,
DMACH_I2S0_TX,
DMACH_I2S2_RX,
DMACH_I2S2_TX,
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART2_RX,
DMACH_UART2_TX,
DMACH_UART4_RX,
DMACH_UART4_TX,
DMACH_SLIMBUS0_RX,
DMACH_SLIMBUS0_TX,
DMACH_SLIMBUS2_RX,
DMACH_SLIMBUS2_TX,
DMACH_SLIMBUS4_RX,
DMACH_SLIMBUS4_TX,
DMACH_AC97_MICIN,
DMACH_AC97_PCMIN,
DMACH_AC97_PCMOUT,
DMACH_MIPI_HSI0,
DMACH_MIPI_HSI2,
DMACH_MIPI_HSI4,
DMACH_MIPI_HSI6,
};
static struct dma_pl330_platdata exynos_pdma0_pdata;
static AMBA_AHB_DEVICE(exynos_pdma0, "dma-pl330.0", 0x00041330,
EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos_pdma0_pdata);
static u8 exynos4210_pdma1_peri[] = {
DMACH_PCM0_RX,
DMACH_PCM0_TX,
DMACH_PCM1_RX,
DMACH_PCM1_TX,
DMACH_MSM_REQ1,
DMACH_MSM_REQ3,
DMACH_SPI1_RX,
DMACH_SPI1_TX,
DMACH_I2S0S_TX,
DMACH_I2S0_RX,
DMACH_I2S0_TX,
DMACH_I2S1_RX,
DMACH_I2S1_TX,
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
DMACH_UART1_TX,
DMACH_UART3_RX,
DMACH_UART3_TX,
DMACH_SLIMBUS1_RX,
DMACH_SLIMBUS1_TX,
DMACH_SLIMBUS3_RX,
DMACH_SLIMBUS3_TX,
DMACH_SLIMBUS5_RX,
DMACH_SLIMBUS5_TX,
};
static u8 exynos4212_pdma1_peri[] = {
DMACH_PCM0_RX,
DMACH_PCM0_TX,
DMACH_PCM1_RX,
DMACH_PCM1_TX,
DMACH_MIPI_HSI2,
DMACH_MIPI_HSI3,
DMACH_SPI1_RX,
DMACH_SPI1_TX,
DMACH_I2S0S_TX,
DMACH_I2S0_RX,
DMACH_I2S0_TX,
DMACH_I2S1_RX,
DMACH_I2S1_TX,
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
DMACH_UART1_TX,
DMACH_UART3_RX,
DMACH_UART3_TX,
DMACH_SLIMBUS1_RX,
DMACH_SLIMBUS1_TX,
DMACH_SLIMBUS3_RX,
DMACH_SLIMBUS3_TX,
DMACH_SLIMBUS5_RX,
DMACH_SLIMBUS5_TX,
DMACH_SLIMBUS0AUX_RX,
DMACH_SLIMBUS0AUX_TX,
DMACH_SPDIF,
DMACH_MIPI_HSI6,
DMACH_MIPI_HSI7,
};
static u8 exynos5250_pdma1_peri[] = {
DMACH_PCM0_RX,
DMACH_PCM0_TX,
DMACH_PCM1_RX,
DMACH_PCM1_TX,
DMACH_SPI1_RX,
DMACH_SPI1_TX,
DMACH_PWM,
DMACH_SPDIF,
DMACH_I2S0S_TX,
DMACH_I2S0_RX,
DMACH_I2S0_TX,
DMACH_I2S1_RX,
DMACH_I2S1_TX,
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
DMACH_UART1_TX,
DMACH_UART3_RX,
DMACH_UART3_TX,
DMACH_SLIMBUS1_RX,
DMACH_SLIMBUS1_TX,
DMACH_SLIMBUS3_RX,
DMACH_SLIMBUS3_TX,
DMACH_SLIMBUS5_RX,
DMACH_SLIMBUS5_TX,
DMACH_SLIMBUS0AUX_RX,
DMACH_SLIMBUS0AUX_TX,
DMACH_DISP1,
DMACH_MIPI_HSI1,
DMACH_MIPI_HSI3,
DMACH_MIPI_HSI5,
DMACH_MIPI_HSI7,
};
static struct dma_pl330_platdata exynos_pdma1_pdata;
static AMBA_AHB_DEVICE(exynos_pdma1, "dma-pl330.1", 0x00041330,
EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos_pdma1_pdata);
static u8 mdma_peri[] = {
DMACH_MTOM_0,
DMACH_MTOM_1,
DMACH_MTOM_2,
DMACH_MTOM_3,
DMACH_MTOM_4,
DMACH_MTOM_5,
DMACH_MTOM_6,
DMACH_MTOM_7,
};
static struct dma_pl330_platdata exynos_mdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(mdma_peri),
.peri_id = mdma_peri,
};
static AMBA_AHB_DEVICE(exynos_mdma1, "dma-pl330.2", 0x00041330,
EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos_mdma1_pdata);
static int __init exynos_dma_init(void)
{
if (of_have_populated_dt())
return 0;
if (soc_is_exynos4210()) {
exynos_pdma0_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4210_pdma0_peri);
exynos_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
exynos_pdma1_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4210_pdma1_peri);
exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
if (samsung_rev() == EXYNOS4210_REV_0)
exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
exynos_pdma0_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4212_pdma0_peri);
exynos_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
exynos_pdma1_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4212_pdma1_peri);
exynos_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
} else if (soc_is_exynos5250()) {
exynos_pdma0_pdata.nr_valid_peri =
ARRAY_SIZE(exynos5250_pdma0_peri);
exynos_pdma0_pdata.peri_id = exynos5250_pdma0_peri;
exynos_pdma1_pdata.nr_valid_peri =
ARRAY_SIZE(exynos5250_pdma1_peri);
exynos_pdma1_pdata.peri_id = exynos5250_pdma1_peri;
exynos_pdma0_device.res.start = EXYNOS5_PA_PDMA0;
exynos_pdma0_device.res.end = EXYNOS5_PA_PDMA0 + SZ_4K;
exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA0;
exynos_pdma1_device.res.start = EXYNOS5_PA_PDMA1;
exynos_pdma1_device.res.end = EXYNOS5_PA_PDMA1 + SZ_4K;
exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA1;
exynos_mdma1_device.res.start = EXYNOS5_PA_MDMA1;
exynos_mdma1_device.res.end = EXYNOS5_PA_MDMA1 + SZ_4K;
exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_MDMA1;
}
dma_cap_set(DMA_SLAVE, exynos_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos_pdma0_pdata.cap_mask);
dma_cap_set(DMA_PRIVATE, exynos_pdma0_pdata.cap_mask);
amba_device_register(&exynos_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, exynos_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos_pdma1_pdata.cap_mask);
dma_cap_set(DMA_PRIVATE, exynos_pdma1_pdata.cap_mask);
amba_device_register(&exynos_pdma1_device, &iomem_resource);
dma_cap_set(DMA_MEMCPY, exynos_mdma1_pdata.cap_mask);
amba_device_register(&exynos_mdma1_device, &iomem_resource);
return 0;
}
arch_initcall(exynos_dma_init);
...@@ -84,7 +84,6 @@ static struct exynos_pm_domain PD = { \ ...@@ -84,7 +84,6 @@ static struct exynos_pm_domain PD = { \
}, \ }, \
} }
#ifdef CONFIG_OF
static void exynos_add_device_to_domain(struct exynos_pm_domain *pd, static void exynos_add_device_to_domain(struct exynos_pm_domain *pd,
struct device *dev) struct device *dev)
{ {
...@@ -193,12 +192,6 @@ static __init int exynos_pm_dt_parse_domains(void) ...@@ -193,12 +192,6 @@ static __init int exynos_pm_dt_parse_domains(void)
return 0; return 0;
} }
#else
static __init int exynos_pm_dt_parse_domains(void)
{
return 0;
}
#endif /* CONFIG_OF */
static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
struct exynos_pm_domain *pd) struct exynos_pm_domain *pd)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment