Commit 3871c387 authored by Michael Stapelberg's avatar Michael Stapelberg Committed by David S. Miller

mv643xx_eth with 88E1318S: support Wake on LAN

This has been tested on a qnap TS-119P II. Note that enabling WOL with
"ethtool -s eth0 wol g" is not enough; you also need to tell the PIC
microcontroller inside the qnap that WOL should be enabled by sending
0xF2 with qcontrol(1) and you have to disable EUP ("Energy-using
Products", a European power-saving thing) by sending 0xF4.
Signed-off-by: default avatarMichael Stapelberg <michael@stapelberg.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 42e836eb
...@@ -20,6 +20,8 @@ ...@@ -20,6 +20,8 @@
* Copyright (C) 2007-2008 Marvell Semiconductor * Copyright (C) 2007-2008 Marvell Semiconductor
* Lennert Buytenhek <buytenh@marvell.com> * Lennert Buytenhek <buytenh@marvell.com>
* *
* Copyright (C) 2013 Michael Stapelberg <michael@stapelberg.de>
*
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2 * as published by the Free Software Foundation; either version 2
...@@ -1523,6 +1525,34 @@ mv643xx_eth_get_settings_phyless(struct mv643xx_eth_private *mp, ...@@ -1523,6 +1525,34 @@ mv643xx_eth_get_settings_phyless(struct mv643xx_eth_private *mp,
return 0; return 0;
} }
static void
mv643xx_eth_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct mv643xx_eth_private *mp = netdev_priv(dev);
wol->supported = 0;
wol->wolopts = 0;
if (mp->phy)
phy_ethtool_get_wol(mp->phy, wol);
}
static int
mv643xx_eth_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct mv643xx_eth_private *mp = netdev_priv(dev);
int err;
if (mp->phy == NULL)
return -EOPNOTSUPP;
err = phy_ethtool_set_wol(mp->phy, wol);
/* Given that mv643xx_eth works without the marvell-specific PHY driver,
* this debugging hint is useful to have.
*/
if (err == -EOPNOTSUPP)
netdev_info(dev, "The PHY does not support set_wol, was CONFIG_MARVELL_PHY enabled?\n");
return err;
}
static int static int
mv643xx_eth_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) mv643xx_eth_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{ {
...@@ -1708,6 +1738,8 @@ static const struct ethtool_ops mv643xx_eth_ethtool_ops = { ...@@ -1708,6 +1738,8 @@ static const struct ethtool_ops mv643xx_eth_ethtool_ops = {
.get_ethtool_stats = mv643xx_eth_get_ethtool_stats, .get_ethtool_stats = mv643xx_eth_get_ethtool_stats,
.get_sset_count = mv643xx_eth_get_sset_count, .get_sset_count = mv643xx_eth_get_sset_count,
.get_ts_info = ethtool_op_get_ts_info, .get_ts_info = ethtool_op_get_ts_info,
.get_wol = mv643xx_eth_get_wol,
.set_wol = mv643xx_eth_set_wol,
}; };
......
...@@ -7,6 +7,8 @@ ...@@ -7,6 +7,8 @@
* *
* Copyright (c) 2004 Freescale Semiconductor, Inc. * Copyright (c) 2004 Freescale Semiconductor, Inc.
* *
* Copyright (c) 2013 Michael Stapelberg <michael@stapelberg.de>
*
* This program is free software; you can redistribute it and/or modify it * This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the * under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your * Free Software Foundation; either version 2 of the License, or (at your
...@@ -80,6 +82,28 @@ ...@@ -80,6 +82,28 @@
#define MII_88E1318S_PHY_MSCR1_REG 16 #define MII_88E1318S_PHY_MSCR1_REG 16
#define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6) #define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6)
/* Copper Specific Interrupt Enable Register */
#define MII_88E1318S_PHY_CSIER 0x12
/* WOL Event Interrupt Enable */
#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7)
/* LED Timer Control Register */
#define MII_88E1318S_PHY_LED_PAGE 0x03
#define MII_88E1318S_PHY_LED_TCR 0x12
#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11)
/* Magic Packet MAC address registers */
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19
#define MII_88E1318S_PHY_WOL_PAGE 0x11
#define MII_88E1318S_PHY_WOL_CTRL 0x10
#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14)
#define MII_88E1121_PHY_LED_CTRL 16 #define MII_88E1121_PHY_LED_CTRL 16
#define MII_88E1121_PHY_LED_PAGE 3 #define MII_88E1121_PHY_LED_PAGE 3
#define MII_88E1121_PHY_LED_DEF 0x0030 #define MII_88E1121_PHY_LED_DEF 0x0030
...@@ -696,6 +720,107 @@ static int m88e1121_did_interrupt(struct phy_device *phydev) ...@@ -696,6 +720,107 @@ static int m88e1121_did_interrupt(struct phy_device *phydev)
return 0; return 0;
} }
static void m88e1318_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
wol->supported = WAKE_MAGIC;
wol->wolopts = 0;
if (phy_write(phydev, MII_MARVELL_PHY_PAGE,
MII_88E1318S_PHY_WOL_PAGE) < 0)
return;
if (phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL) &
MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
wol->wolopts |= WAKE_MAGIC;
if (phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00) < 0)
return;
}
static int m88e1318_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
int err, oldpage, temp;
oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
if (wol->wolopts & WAKE_MAGIC) {
/* Explicitly switch to page 0x00, just to be sure */
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00);
if (err < 0)
return err;
/* Enable the WOL interrupt */
temp = phy_read(phydev, MII_88E1318S_PHY_CSIER);
temp |= MII_88E1318S_PHY_CSIER_WOL_EIE;
err = phy_write(phydev, MII_88E1318S_PHY_CSIER, temp);
if (err < 0)
return err;
err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
MII_88E1318S_PHY_LED_PAGE);
if (err < 0)
return err;
/* Setup LED[2] as interrupt pin (active low) */
temp = phy_read(phydev, MII_88E1318S_PHY_LED_TCR);
temp &= ~MII_88E1318S_PHY_LED_TCR_FORCE_INT;
temp |= MII_88E1318S_PHY_LED_TCR_INTn_ENABLE;
temp |= MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW;
err = phy_write(phydev, MII_88E1318S_PHY_LED_TCR, temp);
if (err < 0)
return err;
err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
MII_88E1318S_PHY_WOL_PAGE);
if (err < 0)
return err;
/* Store the device address for the magic packet */
err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD2,
((phydev->attached_dev->dev_addr[5] << 8) |
phydev->attached_dev->dev_addr[4]));
if (err < 0)
return err;
err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD1,
((phydev->attached_dev->dev_addr[3] << 8) |
phydev->attached_dev->dev_addr[2]));
if (err < 0)
return err;
err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD0,
((phydev->attached_dev->dev_addr[1] << 8) |
phydev->attached_dev->dev_addr[0]));
if (err < 0)
return err;
/* Clear WOL status and enable magic packet matching */
temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL);
temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS;
temp |= MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE;
err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp);
if (err < 0)
return err;
} else {
err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
MII_88E1318S_PHY_WOL_PAGE);
if (err < 0)
return err;
/* Clear WOL status and disable magic packet matching */
temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL);
temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS;
temp &= ~MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE;
err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp);
if (err < 0)
return err;
}
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
if (err < 0)
return err;
return 0;
}
static struct phy_driver marvell_drivers[] = { static struct phy_driver marvell_drivers[] = {
{ {
.phy_id = MARVELL_PHY_ID_88E1101, .phy_id = MARVELL_PHY_ID_88E1101,
...@@ -772,6 +897,8 @@ static struct phy_driver marvell_drivers[] = { ...@@ -772,6 +897,8 @@ static struct phy_driver marvell_drivers[] = {
.ack_interrupt = &marvell_ack_interrupt, .ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr, .config_intr = &marvell_config_intr,
.did_interrupt = &m88e1121_did_interrupt, .did_interrupt = &m88e1121_did_interrupt,
.get_wol = &m88e1318_get_wol,
.set_wol = &m88e1318_set_wol,
.driver = { .owner = THIS_MODULE }, .driver = { .owner = THIS_MODULE },
}, },
{ {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment