Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...

Documentation/arm/sunxi/README

@@ -17,6 +17,10 @@ SunXi family
 	+ User Manual
 	  http://dl.linux-sunxi.org/A10/A10%20User%20Manual%20-%20v1.20%20%282012-04-09%2c%20DECRYPTED%29.pdf
 
+      - Allwinner A10s (sun5i)
+        + Datasheet
+          http://dl.linux-sunxi.org/A10s/A10s%20Datasheet%20-%20v1.20%20%282012-03-27%29.pdf
+
       - Allwinner A13 (sun5i)
         + Datasheet
 	  http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf

Documentation/devicetree/bindings/arm/cci.txt

+=======================================================
+ARM CCI cache coherent interconnect binding description
+=======================================================
+
+ARM multi-cluster systems maintain intra-cluster coherency through a
+cache coherent interconnect (CCI) that is capable of monitoring bus
+transactions and manage coherency, TLB invalidations and memory barriers.
+
+It allows snooping and distributed virtual memory message broadcast across
+clusters, through memory mapped interface, with a global control register
+space and multiple sets of interface control registers, one per slave
+interface.
+
+Bindings for the CCI node follow the ePAPR standard, available from:
+
+www.power.org/documentation/epapr-version-1-1/
+
+with the addition of the bindings described in this document which are
+specific to ARM.
+
+* CCI interconnect node
+
+	Description: Describes a CCI cache coherent Interconnect component
+
+	Node name must be "cci".
+	Node's parent must be the root node /, and the address space visible
+	through the CCI interconnect is the same as the one seen from the
+	root node (ie from CPUs perspective as per DT standard).
+	Every CCI node has to define the following properties:
+
+	- compatible
+		Usage: required
+		Value type: <string>
+		Definition: must be set to
+			    "arm,cci-400"
+
+	- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property. Specifies base physical
+			    address of CCI control registers common to all
+			    interfaces.
+
+	- ranges:
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property. Follow rules in the ePAPR for
+			    hierarchical bus addressing. CCI interfaces
+			    addresses refer to the parent node addressing
+			    scheme to declare their register bases.
+
+	CCI interconnect node can define the following child nodes:
+
+	- CCI control interface nodes
+
+		Node name must be "slave-if".
+		Parent node must be CCI interconnect node.
+
+		A CCI control interface node must contain the following
+		properties:
+
+		- compatible
+			Usage: required
+			Value type: <string>
+			Definition: must be set to
+				    "arm,cci-400-ctrl-if"
+
+		- interface-type:
+			Usage: required
+			Value type: <string>
+			Definition: must be set to one of {"ace", "ace-lite"}
+				    depending on the interface type the node
+				    represents.
+
+		- reg:
+			Usage: required
+			Value type: <prop-encoded-array>
+			Definition: the base address and size of the
+				    corresponding interface programming
+				    registers.
+
+* CCI interconnect bus masters
+
+	Description: masters in the device tree connected to a CCI port
+		     (inclusive of CPUs and their cpu nodes).
+
+	A CCI interconnect bus master node must contain the following
+	properties:
+
+	- cci-control-port:
+		Usage: required
+		Value type: <phandle>
+		Definition: a phandle containing the CCI control interface node
+			    the master is connected to.
+
+Example:
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			cci-control-port = <&cci_control1>;
+			reg = <0x0>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			cci-control-port = <&cci_control1>;
+			reg = <0x1>;
+		};
+
+		CPU2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			cci-control-port = <&cci_control2>;
+			reg = <0x100>;
+		};
+
+		CPU3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			cci-control-port = <&cci_control2>;
+			reg = <0x101>;
+		};
+
+	};
+
+	dma0: dma@3000000 {
+		compatible = "arm,pl330", "arm,primecell";
+		cci-control-port = <&cci_control0>;
+		reg = <0x0 0x3000000 0x0 0x1000>;
+		interrupts = <10>;
+		#dma-cells = <1>;
+		#dma-channels = <8>;
+		#dma-requests = <32>;
+	};
+
+	cci@2c090000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x2c090000 0 0x1000>;
+		ranges = <0x0 0x0 0x2c090000 0x6000>;
+
+		cci_control0: slave-if@1000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace-lite";
+			reg = <0x1000 0x1000>;
+		};
+
+		cci_control1: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+	};
+
+This CCI node corresponds to a CCI component whose control registers sits
+at address 0x000000002c090000.
+CCI slave interface @0x000000002c091000 is connected to dma controller dma0.
+CCI slave interface @0x000000002c094000 is connected to CPUs {CPU0, CPU1};
+CCI slave interface @0x000000002c095000 is connected to CPUs {CPU2, CPU3};

Documentation/devicetree/bindings/arm/keystone/keystone.txt

+TI Keystone Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with Keystone2 based devices (TCI66xxK2H) SOC shall have the
+following properties.
+
+Required properties:
+ - compatible: All TI specific devices present in Keystone SOC should be in
+   the form "ti,keystone-*". Generic devices like gic, arch_timers, ns16550
+   type UART should use the specified compatible for those devices.

Documentation/devicetree/bindings/arm/rtsm-dcscb.txt

+ARM Dual Cluster System Configuration Block
+-------------------------------------------
+
+The Dual Cluster System Configuration Block (DCSCB) provides basic
+functionality for controlling clocks, resets and configuration pins in
+the Dual Cluster System implemented by the Real-Time System Model (RTSM).
+
+Required properties:
+
+- compatible : should be "arm,rtsm,dcscb"
+
+- reg : physical base address and the size of the registers window
+
+Example:
+
+	dcscb@60000000 {
+		compatible = "arm,rtsm,dcscb";
+		reg = <0x60000000 0x1000>;
+	};

Documentation/devicetree/bindings/arm/ste-u300.txt

+ST-Ericsson U300 Device Tree Bindings
+
+For various board the "board" node may contain specific properties
+that pertain to this particular board, such as board-specific GPIOs
+or board power regulator supplies.
+
+Required root node property:
+
+compatible="stericsson,u300";
+
+Required node: syscon
+This contains the system controller.
+- compatible: must be "stericsson,u300-syscon".
+- reg: the base address and size of the system controller.
+
+Boards with the U300 SoC include:
+
+S365 "Small Board U365":
+
+Required node: s365
+This contains the board-specific information.
+- compatible: must be "stericsson,s365".
+- vana15-supply: the regulator supplying the 1.5V to drive the
+  board.
+- syscon: a pointer to the syscon node so we can acccess the
+  syscon registers to set the board as self-powered.
+
+Example:
+
+/ {
+	model = "ST-Ericsson U300";
+	compatible = "stericsson,u300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	s365 {
+		compatible = "stericsson,s365";
+		vana15-supply = <&ab3100_ldo_d_reg>;
+		syscon = <&syscon>;
+	};
+
+	syscon: syscon@c0011000 {
+		compatible = "stericsson,u300-syscon";
+		reg = <0xc0011000 0x1000>;
+	};
+};

Documentation/devicetree/bindings/clock/imx5-clock.txt

@@ -184,6 +184,19 @@ clocks and IDs.
 	cko2			170
 	srtc_gate		171
 	pata_gate		172
+	sata_gate		173
+	spdif_xtal_sel		174
+	spdif0_sel		175
+	spdif1_sel		176
+	spdif0_pred		177
+	spdif0_podf		178
+	spdif1_pred		179
+	spdif1_podf		180
+	spdif0_com_sel		181
+	spdif1_com_sel		182
+	spdif0_gate		183
+	spdif1_gate		184
+	spdif_ipg_gate		185
 
 Examples (for mx53):
 

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -208,6 +208,7 @@ clocks and IDs.
 	pll4_post_div		193
 	pll5_post_div		194
 	pll5_video_div		195
+	eim_slow      		196
 
 Examples:
 

Documentation/devicetree/bindings/clock/imx6sl-clock.txt

+* Clock bindings for Freescale i.MX6 SoloLite
+
+Required properties:
+- compatible: Should be "fsl,imx6sl-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sl-clock.h
+for the full list of i.MX6 SoloLite clock IDs.

Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt

+Clock bindings for ST-Ericsson U300 System Controller Clocks
+
+Bindings for the gated system controller clocks:
+
+Required properties:
+- compatible: must be "stericsson,u300-syscon-clk"
+- #clock-cells: must be <0>
+- clock-type: specifies the type of clock:
+  0 = slow clock
+  1 = fast clock
+  2 = rest/remaining clock
+- clock-id: specifies the clock in the type range
+
+Optional properties:
+- clocks: parent clock(s)
+
+The available clocks per type are as follows:
+
+Type:  ID:   Clock:
+-------------------
+0      0     Slow peripheral bridge clock
+0      1     UART0 clock
+0      4     GPIO clock
+0      6     RTC clock
+0      7     Application timer clock
+0      8     Access timer clock
+
+1      0     Fast peripheral bridge clock
+1      1     I2C bus 0 clock
+1      2     I2C bus 1 clock
+1      5     MMC interface peripheral (silicon) clock
+1      6     SPI clock
+
+2      3     CPU clock
+2      4     DMA controller clock
+2      5     External Memory Interface (EMIF) clock
+2      6     NAND flask interface clock
+2      8     XGAM graphics engine clock
+2      9     Shared External Memory Interface (SEMI) clock
+2      10    AHB Subsystem Bridge clock
+2      12    Interrupt controller clock
+
+Example:
+
+gpio_clk: gpio_clk@13M {
+	#clock-cells = <0>;
+	compatible = "stericsson,u300-syscon-clk";
+	clock-type = <0>; /* Slow */
+	clock-id = <4>;
+	clocks = <&slow_clk>;
+};
+
+gpio: gpio@c0016000 {
+	compatible = "stericsson,gpio-coh901";
+	(...)
+	clocks = <&gpio_clk>;
+};
+
+
+Bindings for the MMC/SD card clock:
+
+Required properties:
+- compatible: must be "stericsson,u300-syscon-mclk"
+- #clock-cells: must be <0>
+
+Optional properties:
+- clocks: parent clock(s)
+
+mmc_mclk: mmc_mclk {
+	#clock-cells = <0>;
+	compatible = "stericsson,u300-syscon-mclk";
+	clocks = <&mmc_pclk>;
+};
+
+mmcsd: mmcsd@c0001000 {
+	compatible = "arm,pl18x", "arm,primecell";
+	clocks = <&mmc_pclk>, <&mmc_mclk>;
+	clock-names = "apb_pclk", "mclk";
+	(...)
+};

Documentation/devicetree/bindings/clock/vf610-clock.txt

+* Clock bindings for Freescale Vybrid VF610 SOC
+
+Required properties:
+- compatible: Should be "fsl,vf610-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
+for the full list of VF610 clock IDs.
+
+Examples:
+
+clks: ccm@4006b000 {
+	compatible = "fsl,vf610-ccm";
+	reg = <0x4006b000 0x1000>;
+	#clock-cells = <1>;
+};
+
+uart1: serial@40028000 {
+	compatible = "fsl,vf610-uart";
+	reg = <0x40028000 0x1000>;
+	interrupts = <0 62 0x04>;
+	clocks = <&clks VF610_CLK_UART1>;
+	clock-names = "ipg";
+};

Documentation/devicetree/bindings/clock/zynq-7000.txt

@@ -6,50 +6,99 @@ The purpose of this document is to document their usage.
 See clock_bindings.txt for more information on the generic clock bindings.
 See Chapter 25 of Zynq TRM for more information about Zynq clocks.
 
-== PLLs ==
-
-Used to describe the ARM_PLL, DDR_PLL, and IO_PLL.
+== Clock Controller ==
+The clock controller is a logical abstraction of Zynq's clock tree. It reads
+required input clock frequencies from the devicetree and acts as clock provider
+for all clock consumers of PS clocks.
 
 Required properties:
-- #clock-cells : shall be 0 (only one clock is output from this node)
-- compatible : "xlnx,zynq-pll"
-- reg : pair of u32 values, which are the address offsets within the SLCR
-        of the relevant PLL_CTRL register and PLL_CFG register respectively
-- clocks : phandle for parent clock.  should be the phandle for ps_clk
+ - #clock-cells : Must be 1
+ - compatible : "xlnx,ps7-clkc"
+ - ps-clk-frequency : Frequency of the oscillator providing ps_clk in HZ
+		      (usually 33 MHz oscillators are used for Zynq platforms)
+ - clock-output-names : List of strings used to name the clock outputs. Shall be
+			a list of the outputs given below.
 
 Optional properties:
-- clock-output-names : name of the output clock
-
-Example:
-	armpll: armpll {
-		#clock-cells = <0>;
-		compatible = "xlnx,zynq-pll";
-		clocks = <&ps_clk>;
-		reg = <0x100 0x110>;
-		clock-output-names = "armpll";
-	};
-
-== Peripheral clocks ==
+ - clocks : as described in the clock bindings
+ - clock-names : as described in the clock bindings
 
-Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks.
+Clock inputs:
+The following strings are optional parameters to the 'clock-names' property in
+order to provide an optional (E)MIO clock source.
+ - swdt_ext_clk
+ - gem0_emio_clk
+ - gem1_emio_clk
+ - mio_clk_XX		# with XX = 00..53
+...
 
-Required properties:
-- #clock-cells : shall be 1
-- compatible : "xlnx,zynq-periph-clock"
-- reg : a single u32 value, describing the offset within the SLCR where
-        the CLK_CTRL register is found for this peripheral
-- clocks : phandle for parent clocks.  should hold phandles for
-           the IO_PLL, ARM_PLL, and DDR_PLL in order
-- clock-output-names : names of the output clock(s).  For peripherals that have
-                       two output clocks (for example, the UART), two clocks
-                       should be listed.
+Clock outputs:
+ 0:  armpll
+ 1:  ddrpll
+ 2:  iopll
+ 3:  cpu_6or4x
+ 4:  cpu_3or2x
+ 5:  cpu_2x
+ 6:  cpu_1x
+ 7:  ddr2x
+ 8:  ddr3x
+ 9:  dci
+ 10: lqspi
+ 11: smc
+ 12: pcap
+ 13: gem0
+ 14: gem1
+ 15: fclk0
+ 16: fclk1
+ 17: fclk2
+ 18: fclk3
+ 19: can0
+ 20: can1
+ 21: sdio0
+ 22: sdio1
+ 23: uart0
+ 24: uart1
+ 25: spi0
+ 26: spi1
+ 27: dma
+ 28: usb0_aper
+ 29: usb1_aper
+ 30: gem0_aper
+ 31: gem1_aper
+ 32: sdio0_aper
+ 33: sdio1_aper
+ 34: spi0_aper
+ 35: spi1_aper
+ 36: can0_aper
+ 37: can1_aper
+ 38: i2c0_aper
+ 39: i2c1_aper
+ 40: uart0_aper
+ 41: uart1_aper
+ 42: gpio_aper
+ 43: lqspi_aper
+ 44: smc_aper
+ 45: swdt
+ 46: dbg_trc
+ 47: dbg_apb
 
 Example:
-	uart_clk: uart_clk {
+	clkc: clkc {
 		#clock-cells = <1>;
-		compatible = "xlnx,zynq-periph-clock";
-		clocks = <&iopll &armpll &ddrpll>;
-		reg = <0x154>;
-		clock-output-names = "uart0_ref_clk",
-				     "uart1_ref_clk";
+		compatible = "xlnx,ps7-clkc";
+		ps-clk-frequency = <33333333>;
+		clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+				"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+				"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+				"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+				"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+				"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+				"gem1_aper", "sdio0_aper", "sdio1_aper",
+				"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+				"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+				"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+				"dbg_trc", "dbg_apb";
+		# optional props
+		clocks = <&clkc 16>, <&clk_foo>;
+		clock-names = "gem1_emio_clk", "can_mio_clk_23";
 	};

Documentation/devicetree/bindings/dma/ste-coh901318.txt

+ST-Ericsson COH 901 318 DMA Controller
+
+This is a DMA controller which has begun as a fork of the
+ARM PL08x PrimeCell VHDL code.
+
+Required properties:
+- compatible: should be "stericsson,coh901318"
+- reg: register locations and length
+- interrupts: the single DMA IRQ
+- #dma-cells: must be set to <1>, as the channels on the
+  COH 901 318 are simple and identified by a single number
+- dma-channels: the number of DMA channels handled
+
+Example:
+
+dmac: dma-controller@c00020000 {
+	compatible = "stericsson,coh901318";
+	reg = <0xc0020000 0x1000>;
+	interrupt-parent = <&vica>;
+	interrupts = <2>;
+	#dma-cells = <1>;
+	dma-channels = <40>;
+};
+
+Consumers example:
+
+uart0: serial@c0013000 {
+	compatible = "...";
+	(...)
+	dmas = <&dmac 17 &dmac 18>;
+	dma-names = "tx", "rx";
+};

Documentation/devicetree/bindings/dma/ti-edma.txt

+TI EDMA
+
+Required properties:
+- compatible : "ti,edma3"
+- ti,edma-regions: Number of regions
+- ti,edma-slots: Number of slots
+- #dma-cells: Should be set to <1>
+              Clients should use a single channel number per DMA request.
+- dma-channels: Specify total DMA channels per CC
+- reg: Memory map for accessing module
+- interrupt-parent: Interrupt controller the interrupt is routed through
+- interrupts: Exactly 3 interrupts need to be specified in the order:
+              1. Transfer completion interrupt.
+              2. Memory protection interrupt.
+              3. Error interrupt.
+Optional properties:
+- ti,hwmods: Name of the hwmods associated to the EDMA
+- ti,edma-xbar-event-map: Crossbar event to channel map
+
+Example:
+
+edma: edma@49000000 {
+	reg = <0x49000000 0x10000>;
+	interrupt-parent = <&intc>;
+	interrupts = <12 13 14>;
+	compatible = "ti,edma3";
+	ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+	#dma-cells = <1>;
+	dma-channels = <64>;
+	ti,edma-regions = <4>;
+	ti,edma-slots = <256>;
+	ti,edma-xbar-event-map = <1 12
+				  2 13>;
+};

Documentation/devicetree/bindings/gpio/gpio-clps711x.txt

+Cirrus Logic CLPS711X GPIO controller
+
+Required properties:
+- compatible: Should be "cirrus,clps711x-gpio"
+- reg: Physical base GPIO controller registers location and length.
+  There should be two registers, first is DATA register, the second
+  is DIRECTION.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be two. The first cell is the pin number and
+  the second cell is used to specify the gpio polarity:
+    0 = active high
+    1 = active low
+
+Note: Each GPIO port should have an alias correctly numbered in "aliases"
+node.
+
+Example:
+
+aliases {
+	gpio0 = &porta;
+};
+
+porta: gpio@80000000 {
+	compatible = "cirrus,clps711x-gpio";
+	reg = <0x80000000 0x1>, <0x80000040 0x1>;
+	gpio-controller;
+	#gpio-cells = <2>;
+};

Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt

+ST-Ericsson COH 901 571/3 GPIO controller
+
+Required properties:
+- compatible: Compatible property value should be "stericsson,gpio-coh901"
+- reg: Physical base address of the controller and length of memory mapped
+  region.
+- interrupts: the 0...n interrupts assigned to the different GPIO ports/banks.

Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt

+ST Microelectronics DDC I2C
+
+Required properties :
+- compatible : Must be "st,ddci2c"
+- reg: physical base address of the controller and length of memory mapped
+     region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Examples :
+

Documentation/devicetree/bindings/pci/designware-pcie.txt

+* Synopsis Designware PCIe interface
+
+Required properties:
+- compatible: should contain "snps,dw-pcie" to identify the
+	core, plus an identifier for the specific instance, such
+	as "samsung,exynos5440-pcie".
+- reg: base addresses and lengths of the pcie controller,
+	the phy controller, additional register for the phy controller.
+- interrupts: interrupt values for level interrupt,
+	pulse interrupt, special interrupt.
+- clocks: from common clock binding: handle to pci clock.
+- clock-names: from common clock binding: should be "pcie" and "pcie_bus".
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- device_type: set to "pci"
+- ranges: ranges for the PCI memory and I/O regions
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties
+	to define the mapping of the PCIe interface to interrupt
+	numbers.
+- reset-gpio: gpio pin number of power good signal
+
+Example:
+
+SoC specific DT Entry:
+
+	pcie@290000 {
+		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
+		reg = <0x290000 0x1000
+			0x270000 0x1000
+			0x271000 0x40>;
+		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
+		clocks = <&clock 28>, <&clock 27>;
+		clock-names = "pcie", "pcie_bus";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /* configuration space */
+			  0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0x0 0 &gic 53>;
+	};
+
+	pcie@2a0000 {
+		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
+		reg = <0x2a0000 0x1000
+			0x272000 0x1000
+			0x271040 0x40>;
+		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
+		clocks = <&clock 29>, <&clock 27>;
+		clock-names = "pcie", "pcie_bus";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /* configuration space */
+			  0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0x0 0 &gic 56>;
+	};
+
+Board specific DT Entry:
+
+	pcie@290000 {
+		reset-gpio = <&pin_ctrl 5 0>;
+	};
+
+	pcie@2a0000 {
+		reset-gpio = <&pin_ctrl 22 0>;
+	};

Documentation/devicetree/bindings/pci/mvebu-pci.txt

+* Marvell EBU PCIe interfaces
+
+Mandatory properties:
+- compatible: one of the following values:
+    marvell,armada-370-pcie
+    marvell,armada-xp-pcie
+    marvell,kirkwood-pcie
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- bus-range: PCI bus numbers covered
+- device_type, set to "pci"
+- ranges: ranges for the PCI memory and I/O regions, as well as the
+  MMIO registers to control the PCIe interfaces.
+
+In addition, the Device Tree node must have sub-nodes describing each
+PCIe interface, having the following mandatory properties:
+- reg: used only for interrupt mapping, so only the first four bytes
+  are used to refer to the correct bus number and device number.
+- assigned-addresses: reference to the MMIO registers used to control
+  this PCIe interface.
+- clocks: the clock associated to this PCIe interface
+- marvell,pcie-port: the physical PCIe port number
+- status: either "disabled" or "okay"
+- device_type, set to "pci"
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- ranges, empty property.
+- interrupt-map-mask and interrupt-map, standard PCI properties to
+  define the mapping of the PCIe interface to interrupt numbers.
+
+and the following optional properties:
+- marvell,pcie-lane: the physical PCIe lane number, for ports having
+  multiple lanes. If this property is not found, we assume that the
+  value is 0.
+
+Example:
+
+pcie-controller {
+	compatible = "marvell,armada-xp-pcie";
+	status = "disabled";
+	device_type = "pci";
+
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bus-range = <0x00 0xff>;
+
+	ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000   /* Port 0.0 registers */
+		  0x82000000 0 0xd0042000 0xd0042000 0 0x00002000   /* Port 2.0 registers */
+		  0x82000000 0 0xd0044000 0xd0044000 0 0x00002000   /* Port 0.1 registers */
+		  0x82000000 0 0xd0048000 0xd0048000 0 0x00002000   /* Port 0.2 registers */
+		  0x82000000 0 0xd004c000 0xd004c000 0 0x00002000   /* Port 0.3 registers */
+		  0x82000000 0 0xd0080000 0xd0080000 0 0x00002000   /* Port 1.0 registers */
+		  0x82000000 0 0xd0082000 0xd0082000 0 0x00002000   /* Port 3.0 registers */
+		  0x82000000 0 0xd0084000 0xd0084000 0 0x00002000   /* Port 1.1 registers */
+		  0x82000000 0 0xd0088000 0xd0088000 0 0x00002000   /* Port 1.2 registers */
+		  0x82000000 0 0xd008c000 0xd008c000 0 0x00002000   /* Port 1.3 registers */
+		  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+		  0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
+
+	pcie@1,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+		reg = <0x0800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 58>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <0>;
+		clocks = <&gateclk 5>;
+		status = "disabled";
+	};
+
+	pcie@2,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>;
+		reg = <0x1000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 59>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <1>;
+		clocks = <&gateclk 6>;
+		status = "disabled";
+	};
+
+	pcie@3,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>;
+		reg = <0x1800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 60>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <2>;
+		clocks = <&gateclk 7>;
+		status = "disabled";
+	};
+
+	pcie@4,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>;
+		reg = <0x2000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 61>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <3>;
+		clocks = <&gateclk 8>;
+		status = "disabled";
+	};
+
+	pcie@5,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
+		reg = <0x2800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 62>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <0>;
+		clocks = <&gateclk 9>;
+		status = "disabled";
+	};
+
+	pcie@6,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>;
+		reg = <0x3000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 63>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <1>;
+		clocks = <&gateclk 10>;
+		status = "disabled";
+	};
+
+	pcie@7,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>;
+		reg = <0x3800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 64>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <2>;
+		clocks = <&gateclk 11>;
+		status = "disabled";
+	};
+
+	pcie@8,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>;
+		reg = <0x4000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 65>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <3>;
+		clocks = <&gateclk 12>;
+		status = "disabled";
+	};
+	pcie@9,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>;
+		reg = <0x4800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 99>;
+		marvell,pcie-port = <2>;
+		marvell,pcie-lane = <0>;
+		clocks = <&gateclk 26>;
+		status = "disabled";
+	};
+
+	pcie@10,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>;
+		reg = <0x5000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 103>;
+		marvell,pcie-port = <3>;
+		marvell,pcie-lane = <0>;
+		clocks = <&gateclk 27>;
+		status = "disabled";
+	};
+};

Documentation/devicetree/bindings/pci/pci.txt

+PCI bus bridges have standardized Device Tree bindings:
+
+PCI Bus Binding to: IEEE Std 1275-1994
+http://www.openfirmware.org/ofwg/bindings/pci/pci2_1.pdf
+
+And for the interrupt mapping part:
+
+Open Firmware Recommended Practice: Interrupt Mapping
+http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf

Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt

+V3 Semiconductor V360 EPC PCI bridge
+
+This bridge is found in the ARM Integrator/AP (Application Platform)
+
+Integrator-specific notes:
+
+- syscon: should contain a link to the syscon device node (since
+  on the Integrator, some registers in the syscon are required to
+  operate the V3).
+
+V360 EPC specific notes:
+
+- reg: should contain the base address of the V3 adapter.
+- interrupts: should contain a reference to the V3 error interrupt
+  as routed on the system.

Documentation/devicetree/bindings/rtc/dw-apb.txt

@@ -5,9 +5,20 @@ Required properties:
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: IRQ line for the timer.
+- either clocks+clock-names or clock-frequency properties
+
+Optional properties:
+- clocks	: list of clock specifiers, corresponding to entries in
+		  the clock-names property;
+- clock-names	: should contain "timer" and "pclk" entries, matching entries
+		  in the clocks property.
 - clock-frequency: The frequency in HZ of the timer.
 - clock-freq: For backwards compatibility with picoxcell
 
+If using the clock specifiers, the pclk clock is optional, as not all
+systems may use one.
+
+
 Example:
 
 		timer1: timer@ffc09000 {
@@ -23,3 +34,11 @@ Example:
 				clock-frequency = <200000000>;
 				reg = <0xffd00000 0x1000>;
 			};
+
+		timer3: timer@ffe00000 {
+				compatible = "snps,dw-apb-timer-osc";
+				interrupts = <0 170 4>;
+				reg = <0xffe00000 0x1000>;
+				clocks = <&timer_clk>, <&timer_pclk>;
+				clock-names = "timer", "pclk";
+			};

Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt

+ST-Ericsson U300 apptimer
+
+Required properties:
+
+- compatible : should be "stericsson,u300-apptimer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 4 interrupts; one for each subtimer. These
+  are, in order: OS (operating system), DD (device driver) both
+  adopted for EPOC/Symbian with two specific IRQs for these tasks,
+  then GP1 and GP2, which are general-purpose timers.
+
+Example:
+
+timer {
+	compatible = "stericsson,u300-apptimer";
+	reg = <0xc0014000 0x1000>;
+	interrupts = <24 25 26 27>;
+};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -59,6 +59,7 @@ ste	ST-Ericsson
 stericsson	ST-Ericsson
 ti	Texas Instruments
 toshiba	Toshiba Corporation
+v3	V3 Semiconductor
 via	VIA Technologies, Inc.
 wlf	Wolfson Microelectronics
 wm	Wondermedia Technologies, Inc.

Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt

+ST-Ericsson COH 901 327 Watchdog timer
+
+Required properties:
+- compatible: must be "stericsson,coh901327".
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: the interrupt used for the watchdog timeout warning.
+
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
+Example:
+
+watchdog: watchdog@c0012000 {
+	compatible = "stericsson,coh901327";
+	reg = <0xc0012000 0x1000>;
+	interrupts = <3>;
+	timeout-sec = <60>;
+};

arch/arm/Kconfig

@@ -9,7 +9,7 @@ config ARM
 	select BUILDTIME_EXTABLE_SORT if MMU
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU
-	select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
+	select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
@@ -366,11 +366,12 @@ config ARCH_CLPS711X
 	select ARCH_REQUIRE_GPIOLIB
 	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select COMMON_CLK
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
+	select MFD_SYSCON
 	select MULTI_IRQ_HANDLER
-	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
 	  Support for Cirrus Logic 711x/721x/731x based boards.
@@ -502,6 +503,7 @@ config ARCH_DOVE
 
 config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
+	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
@@ -634,6 +636,7 @@ config ARCH_MSM
 
 config ARCH_SHMOBILE
 	bool "Renesas SH-Mobile / R-Mobile"
+	select ARM_PATCH_PHYS_VIRT
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
@@ -643,9 +646,8 @@ config ARCH_SHMOBILE
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select MULTI_IRQ_HANDLER
-	select NEED_MACH_MEMORY_H
 	select NO_IOPORT
-	select PINCTRL if ARCH_WANT_OPTIONAL_GPIOLIB
+	select PINCTRL
 	select PM_GENERIC_DOMAINS if PM
 	select SPARSE_IRQ
 	help
@@ -695,6 +697,7 @@ config ARCH_S3C24XX
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
+	select GPIO_SAMSUNG
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -702,6 +705,7 @@ config ARCH_S3C24XX
 	select MULTI_IRQ_HANDLER
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H
+	select SAMSUNG_ATAGS
 	help
 	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
 	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
@@ -717,6 +721,7 @@ config ARCH_S3C64XX
 	select CLKSRC_MMIO
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
+	select GPIO_SAMSUNG
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -726,6 +731,7 @@ config ARCH_S3C64XX
 	select PLAT_SAMSUNG
 	select S3C_DEV_NAND
 	select S3C_GPIO_TRACK
+	select SAMSUNG_ATAGS
 	select SAMSUNG_CLKSRC
 	select SAMSUNG_GPIOLIB_4BIT
 	select SAMSUNG_IRQ_VIC_TIMER
@@ -740,12 +746,14 @@ config ARCH_S5P64X0
 	select CLKSRC_MMIO
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
+	select GPIO_SAMSUNG
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
 	select SAMSUNG_WDT_RESET
+	select SAMSUNG_ATAGS
 	help
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
@@ -757,12 +765,14 @@ config ARCH_S5PC100
 	select CLKSRC_MMIO
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
+	select GPIO_SAMSUNG
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
 	select SAMSUNG_WDT_RESET
+	select SAMSUNG_ATAGS
 	help
 	  Samsung S5PC100 series based systems
 
@@ -775,12 +785,14 @@ config ARCH_S5PV210
 	select CLKSRC_MMIO
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
+	select GPIO_SAMSUNG
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
+	select SAMSUNG_ATAGS
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
@@ -788,7 +800,9 @@ config ARCH_EXYNOS
 	bool "Samsung EXYNOS"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SPARSEMEM_ENABLE
+	select ARM_GIC
 	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select CPU_V7
@@ -797,8 +811,9 @@ config ARCH_EXYNOS
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
-	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
+	select SPARSE_IRQ
+	select USE_OF
 	help
 	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
 
@@ -816,23 +831,6 @@ config ARCH_SHARK
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
 
-config ARCH_U300
-	bool "ST-Ericsson U300 Series"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select ARM_PATCH_PHYS_VIRT
-	select ARM_VIC
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select COMMON_CLK
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_TCM
-	select SPARSE_IRQ
-	help
-	  Support for ST-Ericsson U300 series mobile platforms.
-
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL
@@ -843,6 +841,7 @@ config ARCH_DAVINCI
 	select GENERIC_IRQ_CHIP
 	select HAVE_IDE
 	select NEED_MACH_GPIO_H
+	select TI_PRIV_EDMA
 	select USE_OF
 	select ZONE_DMA
 	help
@@ -874,20 +873,21 @@ menu "Multiple platform selection"
 
 comment "CPU Core family selection"
 
-config ARCH_MULTI_V4
-	bool "ARMv4 based platforms (FA526, StrongARM)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-
 config ARCH_MULTI_V4T
 	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
 	depends on !ARCH_MULTI_V6_V7
 	select ARCH_MULTI_V4_V5
+	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
+		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
+		CPU_ARM925T || CPU_ARM940T)
 
 config ARCH_MULTI_V5
 	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
 	depends on !ARCH_MULTI_V6_V7
 	select ARCH_MULTI_V4_V5
+	select CPU_ARM926T if (!CPU_ARM946E || CPU_ARM1020 || \
+		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
+		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
 
 config ARCH_MULTI_V4_V5
 	bool
@@ -951,6 +951,8 @@ source "arch/arm/mach-iop13xx/Kconfig"
 
 source "arch/arm/mach-ixp4xx/Kconfig"
 
+source "arch/arm/mach-keystone/Kconfig"
+
 source "arch/arm/mach-kirkwood/Kconfig"
 
 source "arch/arm/mach-ks8695/Kconfig"
@@ -984,6 +986,8 @@ source "arch/arm/mach-mmp/Kconfig"
 
 source "arch/arm/mach-realview/Kconfig"
 
+source "arch/arm/mach-rockchip/Kconfig"
+
 source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"
@@ -1420,6 +1424,7 @@ config PCI_HOST_ITE8152
 	select DMABOUNCE
 
 source "drivers/pci/Kconfig"
+source "drivers/pci/pcie/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
 
@@ -1587,6 +1592,7 @@ config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
 	default 512 if SOC_OMAP5
+	default 512 if ARCH_KEYSTONE
 	default 392 if ARCH_U8500
 	default 352 if ARCH_VT8500
 	default 288 if ARCH_SUNXI
@@ -1612,7 +1618,7 @@ config SCHED_HRTICK
 
 config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
-	depends on CPU_V7 && !CPU_V6 && !CPU_V6K
+	depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
 	default y if CPU_THUMBONLY
 	select AEABI
 	select ARM_ASM_UNIFIED
@@ -2067,7 +2073,7 @@ config CRASH_DUMP
 
 config AUTO_ZRELADDR
 	bool "Auto calculation of the decompressed kernel image address"
-	depends on !ZBOOT_ROM && !ARCH_U300
+	depends on !ZBOOT_ROM
 	help
 	  ZRELADDR is the physical address where the decompressed kernel
 	  image will be placed. If AUTO_ZRELADDR is selected, the address

arch/arm/Kconfig-nommu

@@ -28,7 +28,7 @@ config FLASH_SIZE
 config PROCESSOR_ID
 	hex 'Hard wire the processor ID'
 	default 0x00007700
-	depends on !CPU_CP15
+	depends on !(CPU_CP15 || CPU_V7M)
 	help
 	  If processor has no CP15 register, this processor ID is
 	  used instead of the auto-probing which utilizes the register.

arch/arm/Kconfig.debug

@@ -251,6 +251,27 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6Q/DL.
 
+	config DEBUG_IMX6SL_UART
+		bool "i.MX6SL Debug UART"
+		depends on SOC_IMX6SL
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6SL.
+
+	config DEBUG_KEYSTONE_UART0
+		bool "Kernel low-level debugging on KEYSTONE2 using UART0"
+		depends on ARCH_KEYSTONE
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART0 serial port on KEYSTONE2 devices.
+
+	config DEBUG_KEYSTONE_UART1
+		bool "Kernel low-level debugging on KEYSTONE2 using UART1"
+		depends on ARCH_KEYSTONE
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART1 serial port on KEYSTONE2 devices.
+
 	config DEBUG_MMP_UART2
 		bool "Kernel low-level debugging message via MMP UART2"
 		depends on ARCH_MMP
@@ -303,12 +324,37 @@ choice
 		  their output to the serial port on MSM 8960 devices.
 
 	config DEBUG_MVEBU_UART
-		bool "Kernel low-level debugging messages via MVEBU UART"
+		bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
 		depends on ARCH_MVEBU
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on MVEBU based platforms.
 
+		  This option should be used with the old bootloaders
+		  that left the internal registers mapped at
+		  0xd0000000. As of today, this is the case on
+		  platforms such as the Globalscale Mirabox or the
+		  Plathome OpenBlocks AX3, when using the original
+		  bootloader.
+
+		  If the wrong DEBUG_MVEBU_UART* option is selected,
+		  when u-boot hands over to the kernel, the system
+		  silently crashes, with no serial output at all.
+
+	config DEBUG_MVEBU_UART_ALTERNATE
+		bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)"
+		depends on ARCH_MVEBU
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on MVEBU based platforms.
+
+		  This option should be used with the new bootloaders
+		  that remap the internal registers at 0xf1000000.
+
+		  If the wrong DEBUG_MVEBU_UART* option is selected,
+		  when u-boot hands over to the kernel, the system
+		  silently crashes, with no serial output at all.
+
 	config DEBUG_NOMADIK_UART
 		bool "Kernel low-level debugging messages via NOMADIK UART"
 		depends on ARCH_NOMADIK
@@ -353,6 +399,13 @@ choice
 		  their output to the standard serial port on the RealView
 		  PB1176 platform.
 
+	config DEBUG_ROCKCHIP_UART
+		bool "Kernel low-level debugging messages via Rockchip UART"
+		depends on ARCH_ROCKCHIP
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip based platforms.
+
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
@@ -443,6 +496,13 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the uart1 port on SiRFmarco devices.
 
+	config DEBUG_U300_UART
+		bool "Kernel low-level debugging messages via U300 UART0"
+		depends on ARCH_U300
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the uart port on U300 devices.
+
 	config DEBUG_UX500_UART
 		depends on ARCH_U8500
 		bool "Use Ux500 UART for low-level debug"
@@ -532,7 +592,8 @@ config DEBUG_IMX_UART_PORT
 						DEBUG_IMX35_UART || \
 						DEBUG_IMX51_UART || \
 						DEBUG_IMX53_UART || \
-						DEBUG_IMX6Q_UART
+						DEBUG_IMX6Q_UART || \
+						DEBUG_IMX6SL_UART
 	default 1
 	depends on ARCH_MXC
 	help
@@ -587,6 +648,32 @@ choice
 		bool "Zoom2/3 UART"
 endchoice
 
+choice
+	prompt "Low-level debug console UART"
+	depends on DEBUG_ROCKCHIP_UART
+
+	config DEBUG_RK29_UART0
+		bool "RK29 UART0"
+
+	config DEBUG_RK29_UART1
+		bool "RK29 UART1"
+
+	config DEBUG_RK29_UART2
+		bool "RK29 UART2"
+
+	config DEBUG_RK3X_UART0
+		bool "RK3X UART0"
+
+	config DEBUG_RK3X_UART1
+		bool "RK3X UART1"
+
+	config DEBUG_RK3X_UART2
+		bool "RK3X UART2"
+
+	config DEBUG_RK3X_UART3
+		bool "RK3X UART3"
+endchoice
+
 choice
 	prompt "Low-level debug console UART"
 	depends on DEBUG_LL && DEBUG_TEGRA_UART
@@ -631,18 +718,24 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX51_UART || \
 				 DEBUG_IMX53_UART ||\
-				 DEBUG_IMX6Q_UART
-	default "debug/mvebu.S" if DEBUG_MVEBU_UART
+				 DEBUG_IMX6Q_UART || \
+				 DEBUG_IMX6SL_UART
+	default "debug/keystone.S" if DEBUG_KEYSTONE_UART0 || \
+				      DEBUG_KEYSTONE_UART1
+	default "debug/mvebu.S" if DEBUG_MVEBU_UART || \
+				   DEBUG_MVEBU_UART_ALTERNATE
 	default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART
 	default "debug/nomadik.S" if DEBUG_NOMADIK_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
 	default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \
 				 DEBUG_MMP_UART3
+	default "debug/rockchip.S" if DEBUG_ROCKCHIP_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
 	default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
+	default "debug/u300.S" if DEBUG_U300_UART
 	default "debug/ux500.S" if DEBUG_UX500_UART
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
 		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1

arch/arm/Makefile

@@ -59,6 +59,7 @@ comma = ,
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
+arch-$(CONFIG_CPU_32v7M)	:=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
 arch-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
 arch-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
@@ -171,6 +172,7 @@ machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
 machine-$(CONFIG_ARCH_SIRF)		+= prima2
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		+= realview
+machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
 machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx
 machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
@@ -194,9 +196,11 @@ machine-$(CONFIG_PLAT_SPEAR)		+= spear
 machine-$(CONFIG_ARCH_VIRT)		+= virt
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
+machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
+plat-$(CONFIG_ARCH_EXYNOS)	+= samsung
 plat-$(CONFIG_ARCH_OMAP)	+= omap
 plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
 plat-$(CONFIG_PLAT_IOP)		+= iop

arch/arm/boot/compressed/head-shmobile.S

@@ -46,7 +46,7 @@ __image_start:
 __image_end:
 	.long	_got_end
 __load_base:
-	.long	CONFIG_MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
+	.long	MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
 __loaded:
 	.long	__continue
 	.align
@@ -55,26 +55,9 @@ __tmp_stack:
 __continue:
 #endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
 
-	b	1f
-__atags:@ tag #1
-	.long	12			@ tag->hdr.size = tag_size(tag_core);
-	.long	0x54410001		@ tag->hdr.tag = ATAG_CORE;
-	.long   0			@ tag->u.core.flags = 0;
-	.long	0			@ tag->u.core.pagesize = 0;
-	.long	0			@ tag->u.core.rootdev = 0;
-	@ tag #2
-	.long	8			@ tag->hdr.size = tag_size(tag_mem32);
-	.long	0x54410002		@ tag->hdr.tag = ATAG_MEM;
-	.long	CONFIG_MEMORY_SIZE	@ tag->u.mem.size = CONFIG_MEMORY_SIZE;
-	.long	CONFIG_MEMORY_START	@ @ tag->u.mem.start = CONFIG_MEMORY_START;
-	@ tag #3
-	.long	0			@ tag->hdr.size = 0
-	.long	0			@ tag->hdr.tag = ATAG_NONE;
-1:
-
 	/* Set board ID necessary for boot */
 	ldr	r7, 1f				@ Set machine type register
-	adr	r8, __atags			@ Set atag register
+	mov	r8, #0				@ pass null pointer as atag
 	b	2f
 
 1 :	.long MACH_TYPE

arch/arm/boot/dts/Makefile

@@ -64,6 +64,8 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
 	integratorcp.dtb
 dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
 dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
+	kirkwood-db-88f6281.dtb \
+	kirkwood-db-88f6282.dtb \
 	kirkwood-dns320.dtb \
 	kirkwood-dns325.dtb \
 	kirkwood-dockstar.dtb \
@@ -199,6 +201,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra114-pluto.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
 	versatile-pb.dtb
+dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
 	vexpress-v2p-ca9.dtb \
 	vexpress-v2p-ca15-tc1.dtb \

arch/arm/boot/dts/exynos5440-ssdk5440.dts

@@ -30,4 +30,12 @@ xtal {
 			clock-frequency = <50000000>;
 		};
 	};
+
+	pcie@290000 {
+		reset-gpio = <&pin_ctrl 5 0>;
+	};
+
+	pcie@2a0000 {
+		reset-gpio = <&pin_ctrl 22 0>;
+	};
 };

arch/arm/boot/dts/exynos5440.dtsi

@@ -113,7 +113,7 @@ spi {
 		clock-names = "spi", "spi_busclk0";
 	};
 
-	pinctrl {
+	pin_ctrl: pinctrl {
 		compatible = "samsung,exynos5440-pinctrl";
 		reg = <0xE0000 0x1000>;
 		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
@@ -216,4 +216,42 @@ rtc {
 		clock-names = "rtc";
 		status = "disabled";
 	};
+
+	pcie@290000 {
+		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
+		reg = <0x290000 0x1000
+			0x270000 0x1000
+			0x271000 0x40>;
+		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
+		clocks = <&clock 28>, <&clock 27>;
+		clock-names = "pcie", "pcie_bus";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /* configuration space */
+			  0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0x0 0 &gic 53>;
+	};
+
+	pcie@2a0000 {
+		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
+		reg = <0x2a0000 0x1000
+			0x272000 0x1000
+			0x271040 0x40>;
+		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
+		clocks = <&clock 29>, <&clock 27>;
+		clock-names = "pcie", "pcie_bus";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /* configuration space */
+			  0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0x0 0 &gic 56>;
+	};
 };

arch/arm/boot/dts/integratorap.dts

@@ -39,6 +39,47 @@ pic: pic@14000000 {
 		valid-mask = <0x003fffff>;
 	};
 
+	pci: pciv3@62000000 {
+		compatible = "v3,v360epc-pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0x62000000 0x10000>;
+		interrupt-parent = <&pic>;
+		interrupts = <17>; /* Bus error IRQ */
+		ranges = <0x00000000 0 0x61000000 /* config space */
+			0x61000000 0 0x00100000 /* 16 MiB @ 61000000 */
+			0x01000000 0 0x0 /* I/O space */
+			0x60000000 0 0x00100000 /* 16 MiB @ 60000000 */
+			0x02000000 0 0x00000000 /* non-prefectable memory */
+			0x40000000 0 0x10000000 /* 256 MiB @ 40000000 */
+			0x42000000 0 0x10000000 /* prefetchable memory */
+			0x50000000 0 0x10000000>; /* 256 MiB @ 50000000 */
+		interrupt-map-mask = <0xf800 0 0 0x7>;
+		interrupt-map = <
+		/* IDSEL 9 */
+		0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
+		0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
+		0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
+		0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+		/* IDSEL 10 */
+		0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
+		0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
+		0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
+		0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+		/* IDSEL 11 */
+		0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
+		0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
+		0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
+		0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+		/* IDSEL 12 */
+		0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
+		0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
+		0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
+		0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+		>;
+	};
+
 	fpga {
 		/*
 		 * The Integator/AP predates the idea to have magic numbers

arch/arm/boot/dts/keystone.dts

+/*
+ * Copyright 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Texas Instruments Keystone 2 SoC";
+	compatible =  "ti,keystone-evm";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0	= &uart0;
+	};
+
+	memory {
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	gic: interrupt-controller {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#size-cells = <0>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x0 0x02561000 0x0 0x1000>,
+		      <0x0 0x02562000 0x0 0x2000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0x308>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <0 20 0xf01>,
+			     <0 21 0xf01>,
+			     <0 22 0xf01>,
+			     <0 23 0xf01>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,keystone","simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0x0 0x0 0x0 0xc0000000>;
+
+		rstctrl: reset-controller {
+			compatible = "ti,keystone-reset";
+			reg = <0x023100e8 4>;	/* pll reset control reg */
+		};
+
+		uart0: serial@02530c00 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02530c00 0x100>;
+			clock-frequency = <133120000>;
+			interrupts = <0 277 0xf01>;
+		};
+
+		uart1:	serial@02531000 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02531000 0x100>;
+			clock-frequency = <133120000>;
+			interrupts = <0 280 0xf01>;
+		};
+
+	};
+};

arch/arm/boot/dts/kirkwood-6281.dtsi

@@ -40,5 +40,36 @@ pmx_sdio: pmx-sdio {
 				marvell,function = "sdio";
 			};
 		};
+
+		pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000   /* Port 0.0 registers */
+				  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+			          0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
 	};
 };

arch/arm/boot/dts/kirkwood-6282.dtsi

@@ -65,5 +65,53 @@ i2c@11100 {
 			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
+
+		pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000   /* Port 0.0 registers */
+			          0x82000000 0 0x00044000 0x00044000 0 0x00002000   /* Port 1.0 registers */
+				  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
+			          0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 10>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 18>;
+				status = "disabled";
+			};
+		};
 	};
 };

drivers/clk/mvebu/clk-gating-ctrl.h → arch/arm/boot/dts/kirkwood-db-88f6281.dts

 /*
- * Marvell EBU gating clock handling
- *
- * Copyright (C) 2012 Marvell
+ * Marvell DB-88F6281-BP Development Board Setup
  *
+ * Saeed Bishara <saeed@marvell.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
  * This file is licensed under the terms of the GNU General Public
@@ -10,13 +9,22 @@
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __MVEBU_CLK_GATING_H
-#define __MVEBU_CLK_GATING_H
+/dts-v1/;
+
+/include/ "kirkwood-db.dtsi"
+/include/ "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell DB-88F6281-BP Development Board";
+	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
-#ifdef CONFIG_MVEBU_CLK_GATING
-void __init mvebu_gating_clk_init(void);
-#else
-void mvebu_gating_clk_init(void) {}
-#endif
+	ocp@f1000000 {
+		pcie-controller {
+			status = "okay";
 
-#endif
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-db-88f6282.dts

+/*
+ * Marvell DB-88F6282-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/include/ "kirkwood-db.dtsi"
+/include/ "kirkwood-6282.dtsi"
+
+/ {
+	model = "Marvell DB-88F6282-BP Development Board";
+	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-db.dtsi

+/*
+ * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		pinctrl@10000 {
+			pmx_sdio_gpios: pmx-sdio-gpios {
+				marvell,pins = "mpp37", "mpp38";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			pinctrl-0 = <&pmx_nand>;
+			pinctrl-names = "default";
+			chip-delay = <25>;
+			status = "okay";
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "root";
+				reg = <0x500000 0x1fb00000>;
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio_gpios>;
+			pinctrl-names = "default";
+			wp-gpios = <&gpio1 5 0>;
+			cd-gpios = <&gpio1 6 0>;
+			status = "okay";
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -109,6 +109,14 @@ partition@980000 {
 				reg = <0x980000 0x1f400000>;
 			};
 		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
 	};
 
 	gpio-leds {

arch/arm/boot/dts/kirkwood-mplcec4.dts

@@ -139,6 +139,14 @@ mvsdio@90000 {
 			cd-gpios = <&gpio1 15 0>;
 			/* No WP GPIO */
 		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
 	};
 
 	gpio-leds {

arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts

@@ -111,6 +111,14 @@ sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
 		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
 	};
 
 	gpio-leds {

arch/arm/boot/dts/kirkwood-nsa310.dts

@@ -176,6 +176,14 @@ partition@5040000 {
 				reg = <0x5040000 0x2fc0000>;
 			};
 		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
 	};
 
 	gpio_keys {

arch/arm/boot/dts/kirkwood-ts219-6281.dts

 /dts-v1/;
 
-/include/ "kirkwood-ts219.dtsi"
+/include/ "kirkwood.dtsi"
 /include/ "kirkwood-6281.dtsi"
+/include/ "kirkwood-ts219.dtsi"
 
 / {
 	ocp@f1000000 {

arch/arm/boot/dts/kirkwood-ts219-6282.dts

 /dts-v1/;
 
-/include/ "kirkwood-ts219.dtsi"
+/include/ "kirkwood.dtsi"
 /include/ "kirkwood-6282.dtsi"
+/include/ "kirkwood-ts219.dtsi"
 
 / {
 	ocp@f1000000 {

arch/arm/boot/dts/kirkwood-ts219.dtsi

-/include/ "kirkwood.dtsi"
-
 / {
 	model = "QNAP TS219 family";
 	compatible = "qnap,ts219", "marvell,kirkwood";
@@ -74,5 +72,12 @@ sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
 		};
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
 	};
 };

arch/arm/boot/dts/kirkwood.dtsi

@@ -19,6 +19,7 @@ intc: interrupt-controller {
 	ocp@f1000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0xf1000000 0x4000000
+		          0xe0000000 0xe0000000 0x8100000 /* PCIE */
 		          0xf5000000 0xf5000000 0x0000400>;
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/boot/dts/rk3066a-clocks.dtsi

+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+			#clock-cells = <0>;
+		};
+
+		xin24m: xin24m {
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			#clock-cells = <0>;
+		};
+
+		dummy48m: dummy48m {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		dummy150m: dummy150m {
+			compatible = "fixed-clock";
+			clock-frequency = <150000000>;
+			#clock-cells = <0>;
+		};
+
+		clk_gates0: gate-clk@200000d0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d0 0x4>;
+			clocks = <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_core_periph", "gate_cpu_gpll",
+				"gate_ddrphy", "gate_aclk_cpu",
+				"gate_hclk_cpu", "gate_pclk_cpu",
+				"gate_atclk_cpu", "gate_i2s0",
+				"gate_i2s0_frac", "gate_i2s1",
+				"gate_i2s1_frac", "gate_i2s2",
+				"gate_i2s2_frac", "gate_spdif",
+				"gate_spdif_frac", "gate_testclk";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates1: gate-clk@200000d4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d4 0x4>;
+			clocks = <&xin24m>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&dummy>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>;
+
+			clock-output-names =
+				"gate_timer0", "gate_timer1",
+				"gate_timer2", "gate_jtag",
+				"gate_aclk_lcdc1_src", "gate_otgphy0",
+				"gate_otgphy1", "gate_ddr_gpll",
+				"gate_uart0", "gate_frac_uart0",
+				"gate_uart1", "gate_frac_uart1",
+				"gate_uart2", "gate_frac_uart2",
+				"gate_uart3", "gate_frac_uart3";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates2: gate-clk@200000d8 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d8 0x4>;
+			clocks = <&clk_gates2 1>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&clk_gates2 3>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy48m>,
+				 <&dummy>, <&dummy48m>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_periph_src", "gate_aclk_periph",
+				"gate_hclk_periph", "gate_pclk_periph",
+				"gate_smc", "gate_mac",
+				"gate_hsadc", "gate_hsadc_frac",
+				"gate_saradc", "gate_spi0",
+				"gate_spi1", "gate_mmc0",
+				"gate_mac_lbtest", "gate_mmc1",
+				"gate_emmc", "gate_tsadc";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates3: gate-clk@200000dc {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000dc 0x4>;
+			clocks = <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
+				"gate_dclk_lcdc1", "gate_pclkin_cif0",
+				"gate_pclkin_cif1", "reserved",
+				"reserved", "gate_cif0_out",
+				"gate_cif1_out", "gate_aclk_vepu",
+				"gate_hclk_vepu", "gate_aclk_vdpu",
+				"gate_hclk_vdpu", "gate_gpu_src",
+				"reserved", "gate_xin27m";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates4: gate-clk@200000e0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e0 0x4>;
+			clocks = <&clk_gates2 2>, <&clk_gates2 3>,
+				 <&clk_gates2 1>, <&clk_gates2 1>,
+				 <&clk_gates2 1>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates2 2>,
+				 <&clk_gates0 4>, <&clk_gates0 4>,
+				 <&clk_gates0 3>, <&clk_gates0 3>,
+				 <&clk_gates0 3>, <&clk_gates2 3>,
+				 <&clk_gates0 4>;
+
+			clock-output-names =
+				"gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
+				"gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
+				"gate_aclk_pei_niu", "gate_hclk_usb_peri",
+				"gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
+				"gate_hclk_cpubus", "gate_hclk_ahb2apb",
+				"gate_aclk_strc_sys", "gate_aclk_l2mem_con",
+				"gate_aclk_intmem", "gate_pclk_tsadc",
+				"gate_hclk_hdmi";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates5: gate-clk@200000e4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e4 0x4>;
+			clocks = <&clk_gates0 3>, <&clk_gates2 1>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 4>, <&clk_gates0 5>,
+				 <&clk_gates2 1>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates4 5>,
+				 <&clk_gates4 5>, <&dummy>;
+
+			clock-output-names =
+				"gate_aclk_dmac1", "gate_aclk_dmac2",
+				"gate_pclk_efuse", "gate_pclk_tzpc",
+				"gate_pclk_grf", "gate_pclk_pmu",
+				"gate_hclk_rom", "gate_pclk_ddrupctl",
+				"gate_aclk_smc", "gate_hclk_nandc",
+				"gate_hclk_mmc0", "gate_hclk_mmc1",
+				"gate_hclk_emmc", "gate_hclk_otg0",
+				"gate_hclk_otg1", "gate_aclk_gpu";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates6: gate-clk@200000e8 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e8 0x4>;
+			clocks = <&clk_gates3 0>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates0 4>, <&clk_gates3 0>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates3 0>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates0 4>, <&clk_gates3 0>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_aclk_lcdc0", "gate_hclk_lcdc0",
+				"gate_hclk_lcdc1", "gate_aclk_lcdc1",
+				"gate_hclk_cif0", "gate_aclk_cif0",
+				"gate_hclk_cif1", "gate_aclk_cif1",
+				"gate_aclk_ipp", "gate_hclk_ipp",
+				"gate_hclk_rga", "gate_aclk_rga",
+				"gate_hclk_vio_bus", "gate_aclk_vio0",
+				"gate_aclk_vcodec", "gate_shclk_vio_h2h";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates7: gate-clk@200000ec {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000ec 0x4>;
+			clocks = <&clk_gates2 2>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates2 3>;
+
+			clock-output-names =
+				"gate_hclk_emac", "gate_hclk_spdif",
+				"gate_hclk_i2s0_2ch", "gate_hclk_i2s1_2ch",
+				"gate_hclk_i2s_8ch", "gate_hclk_hsadc",
+				"gate_hclk_pidf", "gate_pclk_timer0",
+				"gate_pclk_timer1", "gate_pclk_timer2",
+				"gate_pclk_pwm01", "gate_pclk_pwm23",
+				"gate_pclk_spi0", "gate_pclk_spi1",
+				"gate_pclk_saradc", "gate_pclk_wdt";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates8: gate-clk@200000f0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000f0 0x4>;
+			clocks = <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&dummy>, <&clk_gates0 5>;
+
+			clock-output-names =
+				"gate_pclk_uart0", "gate_pclk_uart1",
+				"gate_pclk_uart2", "gate_pclk_uart3",
+				"gate_pclk_i2c0", "gate_pclk_i2c1",
+				"gate_pclk_i2c2", "gate_pclk_i2c3",
+				"gate_pclk_i2c4", "gate_pclk_gpio0",
+				"gate_pclk_gpio1", "gate_pclk_gpio2",
+				"gate_pclk_gpio3", "gate_pclk_gpio4",
+				"reserved", "gate_pclk_gpio6";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates9: gate-clk@200000f4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000f4 0x4>;
+			clocks = <&dummy>, <&clk_gates0 5>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&clk_gates1 4>,
+				 <&clk_gates0 5>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>;
+
+			clock-output-names =
+				"gate_clk_core_dbg", "gate_pclk_dbg",
+				"gate_clk_trace", "gate_atclk",
+				"gate_clk_l2c", "gate_aclk_vio1",
+				"gate_pclk_publ", "gate_aclk_intmem0",
+				"gate_aclk_intmem1", "gate_aclk_intmem2",
+				"gate_aclk_intmem3";
+
+			#clock-cells = <1>;
+		};
+	};
+
+};

arch/arm/boot/dts/zynq-7000.dtsi

@@ -49,16 +49,18 @@ L2: cache-controller {
 
 		uart0: uart@e0000000 {
 			compatible = "xlnx,xuartps";
+			clocks = <&clkc 23>, <&clkc 40>;
+			clock-names = "ref_clk", "aper_clk";
 			reg = <0xE0000000 0x1000>;
 			interrupts = <0 27 4>;
-			clocks = <&uart_clk 0>;
 		};
 
 		uart1: uart@e0001000 {
 			compatible = "xlnx,xuartps";
+			clocks = <&clkc 24>, <&clkc 41>;
+			clock-names = "ref_clk", "aper_clk";
 			reg = <0xE0001000 0x1000>;
 			interrupts = <0 50 4>;
-			clocks = <&uart_clk 1>;
 		};
 
 		slcr: slcr@f8000000 {
@@ -69,50 +71,21 @@ clocks {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				ps_clk: ps_clk {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					/* clock-frequency set in board-specific file */
-					clock-output-names = "ps_clk";
-				};
-				armpll: armpll {
-					#clock-cells = <0>;
-					compatible = "xlnx,zynq-pll";
-					clocks = <&ps_clk>;
-					reg = <0x100 0x110>;
-					clock-output-names = "armpll";
-				};
-				ddrpll: ddrpll {
-					#clock-cells = <0>;
-					compatible = "xlnx,zynq-pll";
-					clocks = <&ps_clk>;
-					reg = <0x104 0x114>;
-					clock-output-names = "ddrpll";
-				};
-				iopll: iopll {
-					#clock-cells = <0>;
-					compatible = "xlnx,zynq-pll";
-					clocks = <&ps_clk>;
-					reg = <0x108 0x118>;
-					clock-output-names = "iopll";
-				};
-				uart_clk: uart_clk {
-					#clock-cells = <1>;
-					compatible = "xlnx,zynq-periph-clock";
-					clocks = <&iopll &armpll &ddrpll>;
-					reg = <0x154>;
-					clock-output-names = "uart0_ref_clk",
-							     "uart1_ref_clk";
-				};
-				cpu_clk: cpu_clk {
+				clkc: clkc {
 					#clock-cells = <1>;
-					compatible = "xlnx,zynq-cpu-clock";
-					clocks = <&iopll &armpll &ddrpll>;
-					reg = <0x120 0x1C4>;
-					clock-output-names = "cpu_6x4x",
-							     "cpu_3x2x",
-							     "cpu_2x",
-							     "cpu_1x";
+					compatible = "xlnx,ps7-clkc";
+					ps-clk-frequency = <33333333>;
+					clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+							"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+							"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+							"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+							"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+							"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+							"gem1_aper", "sdio0_aper", "sdio1_aper",
+							"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+							"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+							"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+							"dbg_trc", "dbg_apb";
 				};
 			};
 		};
@@ -121,9 +94,8 @@ ttc0: ttc0@f8001000 {
 			interrupt-parent = <&intc>;
 			interrupts = < 0 10 4 0 11 4 0 12 4 >;
 			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
 			reg = <0xF8001000 0x1000>;
-			clocks = <&cpu_clk 3>;
-			clock-names = "cpu_1x";
 			clock-ranges;
 		};
 
@@ -131,9 +103,8 @@ ttc1: ttc1@f8002000 {
 			interrupt-parent = <&intc>;
 			interrupts = < 0 37 4 0 38 4 0 39 4 >;
 			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
 			reg = <0xF8002000 0x1000>;
-			clocks = <&cpu_clk 3>;
-			clock-names = "cpu_1x";
 			clock-ranges;
 		};
 		scutimer: scutimer@f8f00600 {
@@ -141,7 +112,7 @@ scutimer: scutimer@f8f00600 {
 			interrupts = < 1 13 0x301 >;
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = < 0xf8f00600 0x20 >;
-			clocks = <&cpu_clk 1>;
+			clocks = <&clkc 4>;
 		} ;
 	};
 };

arch/arm/boot/dts/zynq-zc702.dts

@@ -28,7 +28,3 @@ chosen {
 	};
 
 };
-
-&ps_clk {
-	clock-frequency = <33333330>;
-};

arch/arm/common/Kconfig

@@ -17,3 +17,6 @@ config SHARP_PARAM
 
 config SHARP_SCOOP
 	bool
+
+config TI_PRIV_EDMA
+	bool

arch/arm/common/Makefile

@@ -16,3 +16,4 @@ obj-$(CONFIG_ARM_TIMER_SP804)	+= timer-sp.o
 obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 AFLAGS_mcpm_head.o		:= -march=armv7-a
 AFLAGS_vlock.o			:= -march=armv7-a
+obj-$(CONFIG_TI_PRIV_EDMA)	+= edma.o

arch/arm/configs/ap4evb_defconfig

-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH7372=y
-CONFIG_MACH_AP4EVB=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
-CONFIG_KEXEC=y
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_CRC32 is not set

arch/arm/configs/bonito_defconfig

-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_R8A7740=y
-CONFIG_MACH_BONITO=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC5,115200 earlyprintk=sh-sci.5,115200 ignore_loglevel"
-CONFIG_KEXEC=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_SUSPEND is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_ARM_INTEGRATOR=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_UIO=y
-CONFIG_UIO_PDRV=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_ARM_UNWIND is not set

arch/arm/configs/clps711x_defconfig

@@ -31,21 +31,18 @@ CONFIG_EP7211_DONGLE=y
 # CONFIG_WIRELESS is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_AUTCPU12=y
 CONFIG_MTD_PLATRAM=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_GPIO=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
 CONFIG_CS89x0=y
 CONFIG_CS89x0_PLATFORM=y
 # CONFIG_NET_VENDOR_FARADAY is not set
@@ -63,7 +60,11 @@ CONFIG_CS89x0_PLATFORM=y
 # CONFIG_VT is not set
 CONFIG_SERIAL_CLPS711X_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
+CONFIG_SPI_CLPS711X=y
+CONFIG_GPIO_CLPS711X=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
@@ -87,4 +88,3 @@ CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_CRC32 is not set

arch/arm/configs/exynos_defconfig

@@ -50,6 +50,7 @@ CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
 CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_CROS_EC=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_CYAPA=y
@@ -104,6 +105,8 @@ CONFIG_MMC_SDHCI_S3C=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_IDMAC=y
 CONFIG_MMC_DW_EXYNOS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_S3C=y
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y

arch/arm/configs/imx_v6_v7_defconfig

@@ -37,6 +37,8 @@ CONFIG_MACH_IMX51_DT=y
 CONFIG_MACH_EUKREA_CPUIMX51SD=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
+CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_VF610=y
 CONFIG_MXC_PWM=y
 CONFIG_SMP=y
 CONFIG_VMSPLIT_2G=y
@@ -47,6 +49,7 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_BINFMT_MISC=m
+CONFIG_PM_RUNTIME=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_TEST_SUSPEND=y
 CONFIG_NET=y
@@ -170,6 +173,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FONTS=y
@@ -182,6 +186,7 @@ CONFIG_SND_SOC=y
 CONFIG_SND_IMX_SOC=y
 CONFIG_SND_SOC_PHYCORE_AC97=y
 CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_SND_SOC_IMX_WM8962=y
 CONFIG_SND_SOC_IMX_SGTL5000=y
 CONFIG_SND_SOC_IMX_MC13783=y
 CONFIG_USB=y
@@ -208,10 +213,15 @@ CONFIG_IMX_SDMA=y
 CONFIG_MXS_DMA=y
 CONFIG_STAGING=y
 CONFIG_DRM_IMX=y
+CONFIG_DRM_IMX_TVE=y
+CONFIG_DRM_IMX_FB_HELPER=y
+CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
 CONFIG_DRM_IMX_IPUV3_CORE=y
 CONFIG_DRM_IMX_IPUV3=y
 CONFIG_COMMON_CLK_DEBUG=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_PWM_IMX=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y

arch/arm/configs/keystone_defconfig

+# CONFIG_SWAP is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_EMBEDDED=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_ARCH_KEYSTONE=y
+CONFIG_ARM_LPAE=y
+CONFIG_SMP=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE_DEMUX=y
+CONFIG_NET_IPGRE=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_INET_AH=y
+CONFIG_INET_IPCOMP=y
+CONFIG_IPV6=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CT_NETLINK=y
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
+CONFIG_NETFILTER_XT_TARGET_MARK=y
+CONFIG_NETFILTER_XT_MATCH_COMMENT=y
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+CONFIG_NETFILTER_XT_MATCH_CPU=y
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
+CONFIG_NETFILTER_XT_MATCH_LENGTH=y
+CONFIG_NETFILTER_XT_MATCH_MAC=y
+CONFIG_NETFILTER_XT_MATCH_MARK=y
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_ULOG=y
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_TARGET_CLUSTERIP=y
+CONFIG_IP_NF_TARGET_ECN=y
+CONFIG_IP_NF_TARGET_TTL=y
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP_SCTP=y
+CONFIG_VLAN_8021Q=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_CMA=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_EEPROM_AT24=y
+CONFIG_NETDEVICES=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_SPIDEV=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_DMADEVICES=y
+CONFIG_COMMON_CLK_DEBUG=y
+CONFIG_MEMORY=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_USER=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_XCBC=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_USER_API_HASH=y
+CONFIG_CRYPTO_USER_API_SKCIPHER=y

arch/arm/configs/kirkwood_defconfig

-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -31,6 +30,7 @@ CONFIG_MACH_T5325=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
 CONFIG_MACH_CLOUDBOX_DT=y
+CONFIG_MACH_DB88F628X_BP_DT=y
 CONFIG_MACH_DLINK_KIRKWOOD_DT=y
 CONFIG_MACH_DOCKSTAR_DT=y
 CONFIG_MACH_DREAMPLUG_DT=y
@@ -50,14 +50,19 @@ CONFIG_MACH_NETSPACE_V2_DT=y
 CONFIG_MACH_NSA310_DT=y
 CONFIG_MACH_OPENBLOCKS_A6_DT=y
 CONFIG_MACH_READYNAS_DT=y
+CONFIG_MACH_SHEEVAPLUG_DT=y
 CONFIG_MACH_TOPKICK_DT=y
 CONFIG_MACH_TS219_DT=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_PCI_MVEBU=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -68,14 +73,12 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
-CONFIG_NET_DSA=y
 CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
@@ -140,6 +143,7 @@ CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
 CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_PRINTER=m

arch/arm/configs/multi_v7_defconfig

@@ -31,10 +31,12 @@ CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
 CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_NETDEVICES=y
+CONFIG_SUN4I_EMAC=y
 CONFIG_NET_CALXEDA_XGMAC=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
 CONFIG_SERIO_AMBAKMI=y
+CONFIG_MDIO_SUN4I=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y

arch/arm/configs/mvebu_defconfig

@@ -13,6 +13,8 @@ CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_XP=y
 # CONFIG_CACHE_L2X0 is not set
 # CONFIG_SWP_EMULATE is not set
+CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
 CONFIG_SMP=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
@@ -60,6 +62,8 @@ CONFIG_USB_SUPPORT=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_XHCI_HCD=y
 CONFIG_MMC=y
 CONFIG_MMC_MVSDIO=y
 CONFIG_NEW_LEDS=y
@@ -96,5 +100,3 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y

arch/arm/configs/u300_defconfig

-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
 # CONFIG_AIO is not set
@@ -11,12 +12,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_U300=y
-CONFIG_MACH_U300=y
-CONFIG_MACH_U300_BS335=y
 CONFIG_MACH_U300_SPIDUMMY=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -44,14 +42,15 @@ CONFIG_I2C=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-CONFIG_MMC_CLKGATE=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_MMC_ARMMMCI=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -70,4 +69,3 @@ CONFIG_DEBUG_FS=y
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set

arch/arm/include/asm/assembler.h

@@ -136,7 +136,11 @@
  * assumes FIQs are enabled, and that the processor is in SVC mode.
  */
 	.macro	save_and_disable_irqs, oldcpsr
+#ifdef CONFIG_CPU_V7M
+	mrs	\oldcpsr, primask
+#else
 	mrs	\oldcpsr, cpsr
+#endif
 	disable_irq
 	.endm
 
@@ -150,7 +154,11 @@
  * guarantee that this will preserve the flags.
  */
 	.macro	restore_irqs_notrace, oldcpsr
+#ifdef CONFIG_CPU_V7M
+	msr	primask, \oldcpsr
+#else
 	msr	cpsr_c, \oldcpsr
+#endif
 	.endm
 
 	.macro restore_irqs, oldcpsr
@@ -229,7 +237,14 @@
 #endif
 	.endm
 
-#ifdef CONFIG_THUMB2_KERNEL
+#if defined(CONFIG_CPU_V7M)
+	/*
+	 * setmode is used to assert to be in svc mode during boot. For v7-M
+	 * this is done in __v7m_setup, so setmode can be empty here.
+	 */
+	.macro	setmode, mode, reg
+	.endm
+#elif defined(CONFIG_THUMB2_KERNEL)
 	.macro	setmode, mode, reg
 	mov	\reg, #\mode
 	msr	cpsr_c, \reg

arch/arm/include/asm/cp15.h

@@ -61,6 +61,20 @@ static inline void set_cr(unsigned int val)
 	isb();
 }
 
+static inline unsigned int get_auxcr(void)
+{
+	unsigned int val;
+	asm("mrc p15, 0, %0, c1, c0, 1	@ get AUXCR" : "=r" (val));
+	return val;
+}
+
+static inline void set_auxcr(unsigned int val)
+{
+	asm volatile("mcr p15, 0, %0, c1, c0, 1	@ set AUXCR"
+	  : : "r" (val));
+	isb();
+}
+
 #ifndef CONFIG_SMP
 extern void adjust_cr(unsigned long mask, unsigned long set);
 #endif

arch/arm/include/asm/cputype.h

@@ -10,6 +10,22 @@
 #define CPUID_TLBTYPE	3
 #define CPUID_MPIDR	5
 
+#ifdef CONFIG_CPU_V7M
+#define CPUID_EXT_PFR0	0x40
+#define CPUID_EXT_PFR1	0x44
+#define CPUID_EXT_DFR0	0x48
+#define CPUID_EXT_AFR0	0x4c
+#define CPUID_EXT_MMFR0	0x50
+#define CPUID_EXT_MMFR1	0x54
+#define CPUID_EXT_MMFR2	0x58
+#define CPUID_EXT_MMFR3	0x5c
+#define CPUID_EXT_ISAR0	0x60
+#define CPUID_EXT_ISAR1	0x64
+#define CPUID_EXT_ISAR2	0x68
+#define CPUID_EXT_ISAR3	0x6c
+#define CPUID_EXT_ISAR4	0x70
+#define CPUID_EXT_ISAR5	0x74
+#else
 #define CPUID_EXT_PFR0	"c1, 0"
 #define CPUID_EXT_PFR1	"c1, 1"
 #define CPUID_EXT_DFR0	"c1, 2"
@@ -24,6 +40,7 @@
 #define CPUID_EXT_ISAR3	"c2, 3"
 #define CPUID_EXT_ISAR4	"c2, 4"
 #define CPUID_EXT_ISAR5	"c2, 5"
+#endif
 
 #define MPIDR_SMP_BITMASK (0x3 << 30)
 #define MPIDR_SMP_VALUE (0x2 << 30)
@@ -81,7 +98,23 @@ extern unsigned int processor_id;
 		__val;							\
 	})
 
-#else /* ifdef CONFIG_CPU_CP15 */
+#elif defined(CONFIG_CPU_V7M)
+
+#include <asm/io.h>
+#include <asm/v7m.h>
+
+#define read_cpuid(reg)							\
+	({								\
+		WARN_ON_ONCE(1);					\
+		0;							\
+	})
+
+static inline unsigned int __attribute_const__ read_cpuid_ext(unsigned offset)
+{
+	return readl(BASEADDR_V7M_SCB + offset);
+}
+
+#else /* ifdef CONFIG_CPU_CP15 / elif defined (CONFIG_CPU_V7M) */
 
 /*
  * read_cpuid and read_cpuid_ext should only ever be called on machines that
@@ -108,7 +141,14 @@ static inline unsigned int __attribute_const__ read_cpuid_id(void)
 	return read_cpuid(CPUID_ID);
 }
 
-#else /* ifdef CONFIG_CPU_CP15 */
+#elif defined(CONFIG_CPU_V7M)
+
+static inline unsigned int __attribute_const__ read_cpuid_id(void)
+{
+	return readl(BASEADDR_V7M_SCB + V7M_SCB_CPUID);
+}
+
+#else /* ifdef CONFIG_CPU_CP15 / elif defined(CONFIG_CPU_V7M) */
 
 static inline unsigned int __attribute_const__ read_cpuid_id(void)
 {

arch/arm/include/asm/glue-cache.h

@@ -117,10 +117,37 @@
 # endif
 #endif
 
+#if defined(CONFIG_CPU_V7M)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE nop
+# endif
+#endif
+
 #if !defined(_CACHE) && !defined(MULTI_CACHE)
 #error Unknown cache maintenance model
 #endif
 
+#ifndef __ASSEMBLER__
+extern inline void nop_flush_icache_all(void) { }
+extern inline void nop_flush_kern_cache_all(void) { }
+extern inline void nop_flush_kern_cache_louis(void) { }
+extern inline void nop_flush_user_cache_all(void) { }
+extern inline void nop_flush_user_cache_range(unsigned long a,
+		unsigned long b, unsigned int c) { }
+
+extern inline void nop_coherent_kern_range(unsigned long a, unsigned long b) { }
+extern inline int nop_coherent_user_range(unsigned long a,
+		unsigned long b) { return 0; }
+extern inline void nop_flush_kern_dcache_area(void *a, size_t s) { }
+
+extern inline void nop_dma_flush_range(const void *a, const void *b) { }
+
+extern inline void nop_dma_map_area(const void *s, size_t l, int f) { }
+extern inline void nop_dma_unmap_area(const void *s, size_t l, int f) { }
+#endif
+
 #ifndef MULTI_CACHE
 #define __cpuc_flush_icache_all		__glue(_CACHE,_flush_icache_all)
 #define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)

arch/arm/include/asm/glue-df.h

@@ -95,6 +95,14 @@
 # endif
 #endif
 
+#ifdef CONFIG_CPU_ABRT_NOMMU
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER nommu_early_abort
+# endif
+#endif
+
 #ifndef CPU_DABORT_HANDLER
 #error Unknown data abort handler type
 #endif

arch/arm/include/asm/glue-proc.h

@@ -239,6 +239,15 @@
 # endif
 #endif
 
+#ifdef CONFIG_CPU_V7M
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_v7m
+# endif
+#endif
+
 #ifndef MULTI_CPU
 #define cpu_proc_init			__glue(CPU_NAME,_proc_init)
 #define cpu_proc_fin			__glue(CPU_NAME,_proc_fin)

arch/arm/include/asm/hardware/pci_v3.h

-/*
- *  arch/arm/include/asm/hardware/pci_v3.h
- *
- *  Internal header file PCI V3 chip
- *
- *  Copyright (C) ARM Limited
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef ASM_ARM_HARDWARE_PCI_V3_H
-#define ASM_ARM_HARDWARE_PCI_V3_H
-
-/* -------------------------------------------------------------------------------
- *  V3 Local Bus to PCI Bridge definitions
- * -------------------------------------------------------------------------------
- *  Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04
- *  All V3 register names are prefaced by V3_ to avoid clashing with any other
- *  PCI definitions.  Their names match the user's manual.
- * 
- *  I'm assuming that I20 is disabled.
- * 
- */
-#define V3_PCI_VENDOR                   0x00000000
-#define V3_PCI_DEVICE                   0x00000002
-#define V3_PCI_CMD                      0x00000004
-#define V3_PCI_STAT                     0x00000006
-#define V3_PCI_CC_REV                   0x00000008
-#define V3_PCI_HDR_CFG                  0x0000000C
-#define V3_PCI_IO_BASE                  0x00000010
-#define V3_PCI_BASE0                    0x00000014
-#define V3_PCI_BASE1                    0x00000018
-#define V3_PCI_SUB_VENDOR               0x0000002C
-#define V3_PCI_SUB_ID                   0x0000002E
-#define V3_PCI_ROM                      0x00000030
-#define V3_PCI_BPARAM                   0x0000003C
-#define V3_PCI_MAP0                     0x00000040
-#define V3_PCI_MAP1                     0x00000044
-#define V3_PCI_INT_STAT                 0x00000048
-#define V3_PCI_INT_CFG                  0x0000004C 
-#define V3_LB_BASE0                     0x00000054
-#define V3_LB_BASE1                     0x00000058
-#define V3_LB_MAP0                      0x0000005E
-#define V3_LB_MAP1                      0x00000062
-#define V3_LB_BASE2                     0x00000064
-#define V3_LB_MAP2                      0x00000066
-#define V3_LB_SIZE                      0x00000068
-#define V3_LB_IO_BASE                   0x0000006E
-#define V3_FIFO_CFG                     0x00000070
-#define V3_FIFO_PRIORITY                0x00000072
-#define V3_FIFO_STAT                    0x00000074
-#define V3_LB_ISTAT                     0x00000076
-#define V3_LB_IMASK                     0x00000077
-#define V3_SYSTEM                       0x00000078
-#define V3_LB_CFG                       0x0000007A
-#define V3_PCI_CFG                      0x0000007C
-#define V3_DMA_PCI_ADR0                 0x00000080
-#define V3_DMA_PCI_ADR1                 0x00000090
-#define V3_DMA_LOCAL_ADR0               0x00000084
-#define V3_DMA_LOCAL_ADR1               0x00000094
-#define V3_DMA_LENGTH0                  0x00000088
-#define V3_DMA_LENGTH1                  0x00000098
-#define V3_DMA_CSR0                     0x0000008B
-#define V3_DMA_CSR1                     0x0000009B
-#define V3_DMA_CTLB_ADR0                0x0000008C
-#define V3_DMA_CTLB_ADR1                0x0000009C
-#define V3_DMA_DELAY                    0x000000E0
-#define V3_MAIL_DATA                    0x000000C0
-#define V3_PCI_MAIL_IEWR                0x000000D0
-#define V3_PCI_MAIL_IERD                0x000000D2
-#define V3_LB_MAIL_IEWR                 0x000000D4
-#define V3_LB_MAIL_IERD                 0x000000D6
-#define V3_MAIL_WR_STAT                 0x000000D8
-#define V3_MAIL_RD_STAT                 0x000000DA
-#define V3_QBA_MAP                      0x000000DC
-
-/*  PCI COMMAND REGISTER bits
- */
-#define V3_COMMAND_M_FBB_EN             (1 << 9)
-#define V3_COMMAND_M_SERR_EN            (1 << 8)
-#define V3_COMMAND_M_PAR_EN             (1 << 6)
-#define V3_COMMAND_M_MASTER_EN          (1 << 2)
-#define V3_COMMAND_M_MEM_EN             (1 << 1)
-#define V3_COMMAND_M_IO_EN              (1 << 0)
-
-/*  SYSTEM REGISTER bits
- */
-#define V3_SYSTEM_M_RST_OUT             (1 << 15)
-#define V3_SYSTEM_M_LOCK                (1 << 14)
-
-/*  PCI_CFG bits
- */
-#define V3_PCI_CFG_M_I2O_EN		(1 << 15)
-#define V3_PCI_CFG_M_IO_REG_DIS		(1 << 14)
-#define V3_PCI_CFG_M_IO_DIS		(1 << 13)
-#define V3_PCI_CFG_M_EN3V		(1 << 12)
-#define V3_PCI_CFG_M_RETRY_EN           (1 << 10)
-#define V3_PCI_CFG_M_AD_LOW1            (1 << 9)
-#define V3_PCI_CFG_M_AD_LOW0            (1 << 8)
-
-/*  PCI_BASE register bits (PCI -> Local Bus)
- */
-#define V3_PCI_BASE_M_ADR_BASE          0xFFF00000
-#define V3_PCI_BASE_M_ADR_BASEL         0x000FFF00
-#define V3_PCI_BASE_M_PREFETCH          (1 << 3)
-#define V3_PCI_BASE_M_TYPE              (3 << 1)
-#define V3_PCI_BASE_M_IO                (1 << 0)
-
-/*  PCI MAP register bits (PCI -> Local bus)
- */
-#define V3_PCI_MAP_M_MAP_ADR            0xFFF00000
-#define V3_PCI_MAP_M_RD_POST_INH        (1 << 15)
-#define V3_PCI_MAP_M_ROM_SIZE           (3 << 10)
-#define V3_PCI_MAP_M_SWAP               (3 << 8)
-#define V3_PCI_MAP_M_ADR_SIZE           0x000000F0
-#define V3_PCI_MAP_M_REG_EN             (1 << 1)
-#define V3_PCI_MAP_M_ENABLE             (1 << 0)
-
-/*
- *  LB_BASE0,1 register bits (Local bus -> PCI)
- */
-#define V3_LB_BASE_ADR_BASE		0xfff00000
-#define V3_LB_BASE_SWAP			(3 << 8)
-#define V3_LB_BASE_ADR_SIZE		(15 << 4)
-#define V3_LB_BASE_PREFETCH		(1 << 3)
-#define V3_LB_BASE_ENABLE		(1 << 0)
-
-#define V3_LB_BASE_ADR_SIZE_1MB		(0 << 4)
-#define V3_LB_BASE_ADR_SIZE_2MB		(1 << 4)
-#define V3_LB_BASE_ADR_SIZE_4MB		(2 << 4)
-#define V3_LB_BASE_ADR_SIZE_8MB		(3 << 4)
-#define V3_LB_BASE_ADR_SIZE_16MB	(4 << 4)
-#define V3_LB_BASE_ADR_SIZE_32MB	(5 << 4)
-#define V3_LB_BASE_ADR_SIZE_64MB	(6 << 4)
-#define V3_LB_BASE_ADR_SIZE_128MB	(7 << 4)
-#define V3_LB_BASE_ADR_SIZE_256MB	(8 << 4)
-#define V3_LB_BASE_ADR_SIZE_512MB	(9 << 4)
-#define V3_LB_BASE_ADR_SIZE_1GB		(10 << 4)
-#define V3_LB_BASE_ADR_SIZE_2GB		(11 << 4)
-
-#define v3_addr_to_lb_base(a)	((a) & V3_LB_BASE_ADR_BASE)
-
-/*
- *  LB_MAP0,1 register bits (Local bus -> PCI)
- */
-#define V3_LB_MAP_MAP_ADR		0xfff0
-#define V3_LB_MAP_TYPE			(7 << 1)
-#define V3_LB_MAP_AD_LOW_EN		(1 << 0)
-
-#define V3_LB_MAP_TYPE_IACK		(0 << 1)
-#define V3_LB_MAP_TYPE_IO		(1 << 1)
-#define V3_LB_MAP_TYPE_MEM		(3 << 1)
-#define V3_LB_MAP_TYPE_CONFIG		(5 << 1)
-#define V3_LB_MAP_TYPE_MEM_MULTIPLE	(6 << 1)
-
-#define v3_addr_to_lb_map(a)	(((a) >> 16) & V3_LB_MAP_MAP_ADR)
-
-/*
- *  LB_BASE2 register bits (Local bus -> PCI IO)
- */
-#define V3_LB_BASE2_ADR_BASE		0xff00
-#define V3_LB_BASE2_SWAP		(3 << 6)
-#define V3_LB_BASE2_ENABLE		(1 << 0)
-
-#define v3_addr_to_lb_base2(a)	(((a) >> 16) & V3_LB_BASE2_ADR_BASE)
-
-/*
- *  LB_MAP2 register bits (Local bus -> PCI IO)
- */
-#define V3_LB_MAP2_MAP_ADR		0xff00
-
-#define v3_addr_to_lb_map2(a)	(((a) >> 16) & V3_LB_MAP2_MAP_ADR)
-
-#endif

arch/arm/include/asm/irqflags.h

@@ -8,6 +8,16 @@
 /*
  * CPU interrupt mask handling.
  */
+#ifdef CONFIG_CPU_V7M
+#define IRQMASK_REG_NAME_R "primask"
+#define IRQMASK_REG_NAME_W "primask"
+#define IRQMASK_I_BIT	1
+#else
+#define IRQMASK_REG_NAME_R "cpsr"
+#define IRQMASK_REG_NAME_W "cpsr_c"
+#define IRQMASK_I_BIT	PSR_I_BIT
+#endif
+
 #if __LINUX_ARM_ARCH__ >= 6
 
 static inline unsigned long arch_local_irq_save(void)
@@ -15,7 +25,7 @@ static inline unsigned long arch_local_irq_save(void)
 	unsigned long flags;
 
 	asm volatile(
-		"	mrs	%0, cpsr	@ arch_local_irq_save\n"
+		"	mrs	%0, " IRQMASK_REG_NAME_R "	@ arch_local_irq_save\n"
 		"	cpsid	i"
 		: "=r" (flags) : : "memory", "cc");
 	return flags;
@@ -129,7 +139,7 @@ static inline unsigned long arch_local_save_flags(void)
 {
 	unsigned long flags;
 	asm volatile(
-		"	mrs	%0, cpsr	@ local_save_flags"
+		"	mrs	%0, " IRQMASK_REG_NAME_R "	@ local_save_flags"
 		: "=r" (flags) : : "memory", "cc");
 	return flags;
 }
@@ -140,7 +150,7 @@ static inline unsigned long arch_local_save_flags(void)
 static inline void arch_local_irq_restore(unsigned long flags)
 {
 	asm volatile(
-		"	msr	cpsr_c, %0	@ local_irq_restore"
+		"	msr	" IRQMASK_REG_NAME_W ", %0	@ local_irq_restore"
 		:
 		: "r" (flags)
 		: "memory", "cc");
@@ -148,8 +158,8 @@ static inline void arch_local_irq_restore(unsigned long flags)
 
 static inline int arch_irqs_disabled_flags(unsigned long flags)
 {
-	return flags & PSR_I_BIT;
+	return flags & IRQMASK_I_BIT;
 }
 
-#endif
-#endif
+#endif /* ifdef __KERNEL__ */
+#endif /* ifndef __ASM_ARM_IRQFLAGS_H */

arch/arm/include/asm/mach/arch.h

@@ -8,6 +8,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/types.h>
+
 #ifndef __ASSEMBLY__
 
 struct tag;
@@ -16,8 +18,10 @@ struct pt_regs;
 struct smp_operations;
 #ifdef CONFIG_SMP
 #define smp_ops(ops) (&(ops))
+#define smp_init_ops(ops) (&(ops))
 #else
 #define smp_ops(ops) (struct smp_operations *)NULL
+#define smp_init_ops(ops) (bool (*)(void))NULL
 #endif
 
 struct machine_desc {
@@ -41,6 +45,7 @@ struct machine_desc {
 	unsigned char		reserve_lp2 :1;	/* never has lp2	*/
 	char			restart_mode;	/* default restart mode	*/
 	struct smp_operations	*smp;		/* SMP operations	*/
+	bool			(*smp_init)(void);
 	void			(*fixup)(struct tag *, char **,
 					 struct meminfo *);
 	void			(*reserve)(void);/* reserve mem blocks	*/

arch/arm/include/asm/mach/pci.h

@@ -16,6 +16,7 @@
 struct pci_sys_data;
 struct pci_ops;
 struct pci_bus;
+struct device;
 
 struct hw_pci {
 #ifdef CONFIG_PCI_DOMAINS
@@ -68,7 +69,16 @@ struct pci_sys_data {
 /*
  * Call this with your hw_pci struct to initialise the PCI system.
  */
-void pci_common_init(struct hw_pci *);
+void pci_common_init_dev(struct device *, struct hw_pci *);
+
+/*
+ * Compatibility wrapper for older platforms that do not care about
+ * passing the parent device.
+ */
+static inline void pci_common_init(struct hw_pci *hw)
+{
+	pci_common_init_dev(NULL, hw);
+}
 
 /*
  * Setup early fixed I/O mapping.
@@ -96,9 +106,4 @@ extern struct pci_ops via82c505_ops;
 extern int via82c505_setup(int nr, struct pci_sys_data *);
 extern void via82c505_init(void *sysdata);
 
-extern struct pci_ops pci_v3_ops;
-extern int pci_v3_setup(int nr, struct pci_sys_data *);
-extern void pci_v3_preinit(void);
-extern void pci_v3_postinit(void);
-
 #endif /* __ASM_MACH_PCI_H */

arch/arm/include/asm/psci.h

@@ -32,5 +32,14 @@ struct psci_operations {
 };
 
 extern struct psci_operations psci_ops;
+extern struct smp_operations psci_smp_ops;
+
+#ifdef CONFIG_ARM_PSCI
+void psci_init(void);
+bool psci_smp_available(void);
+#else
+static inline void psci_init(void) { }
+static inline bool psci_smp_available(void) { return false; }
+#endif
 
 #endif /* __ASM_ARM_PSCI_H */

arch/arm/include/asm/ptrace.h

@@ -45,6 +45,7 @@ struct pt_regs {
  */
 static inline int valid_user_regs(struct pt_regs *regs)
 {
+#ifndef CONFIG_CPU_V7M
 	unsigned long mode = regs->ARM_cpsr & MODE_MASK;
 
 	/*
@@ -67,6 +68,9 @@ static inline int valid_user_regs(struct pt_regs *regs)
 		regs->ARM_cpsr |= USR_MODE;
 
 	return 0;
+#else /* ifndef CONFIG_CPU_V7M */
+	return 1;
+#endif
 }
 
 static inline long regs_return_value(struct pt_regs *regs)

arch/arm/include/asm/system_info.h

@@ -11,6 +11,7 @@
 #define CPU_ARCH_ARMv5TEJ	7
 #define CPU_ARCH_ARMv6		8
 #define CPU_ARCH_ARMv7		9
+#define CPU_ARCH_ARMv7M		10
 
 #ifndef __ASSEMBLY__
 

arch/arm/include/asm/v7m.h

+/*
+ * Common defines for v7m cpus
+ */
+#define V7M_SCS_ICTR			IOMEM(0xe000e004)
+#define V7M_SCS_ICTR_INTLINESNUM_MASK		0x0000000f
+
+#define BASEADDR_V7M_SCB		IOMEM(0xe000ed00)
+
+#define V7M_SCB_CPUID			0x00
+
+#define V7M_SCB_ICSR			0x04
+#define V7M_SCB_ICSR_PENDSVSET			(1 << 28)
+#define V7M_SCB_ICSR_PENDSVCLR			(1 << 27)
+#define V7M_SCB_ICSR_RETTOBASE			(1 << 11)
+
+#define V7M_SCB_VTOR			0x08
+
+#define V7M_SCB_SCR			0x10
+#define V7M_SCB_SCR_SLEEPDEEP			(1 << 2)
+
+#define V7M_SCB_CCR			0x14
+#define V7M_SCB_CCR_STKALIGN			(1 << 9)
+
+#define V7M_SCB_SHPR2			0x1c
+#define V7M_SCB_SHPR3			0x20
+
+#define V7M_SCB_SHCSR			0x24
+#define V7M_SCB_SHCSR_USGFAULTENA		(1 << 18)
+#define V7M_SCB_SHCSR_BUSFAULTENA		(1 << 17)
+#define V7M_SCB_SHCSR_MEMFAULTENA		(1 << 16)
+
+#define V7M_xPSR_FRAMEPTRALIGN			0x00000200
+#define V7M_xPSR_EXCEPTIONNO			0x000001ff
+
+/*
+ * When branching to an address that has bits [31:28] == 0xf an exception return
+ * occurs. Bits [27:5] are reserved (SBOP). If the processor implements the FP
+ * extension Bit [4] defines if the exception frame has space allocated for FP
+ * state information, SBOP otherwise. Bit [3] defines the mode that is returned
+ * to (0 -> handler mode; 1 -> thread mode). Bit [2] defines which sp is used
+ * (0 -> msp; 1 -> psp). Bits [1:0] are fixed to 0b01.
+ */
+#define EXC_RET_STACK_MASK			0x00000004
+#define EXC_RET_THREADMODE_PROCESSSTACK		0xfffffffd

arch/arm/include/debug/imx-uart.h

@@ -65,6 +65,14 @@
 #define IMX6Q_UART_BASE_ADDR(n)	IMX6Q_UART##n##_BASE_ADDR
 #define IMX6Q_UART_BASE(n)	IMX6Q_UART_BASE_ADDR(n)
 
+#define IMX6SL_UART1_BASE_ADDR	0x02020000
+#define IMX6SL_UART2_BASE_ADDR	0x02024000
+#define IMX6SL_UART3_BASE_ADDR	0x02034000
+#define IMX6SL_UART4_BASE_ADDR	0x02038000
+#define IMX6SL_UART5_BASE_ADDR	0x02018000
+#define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR
+#define IMX6SL_UART_BASE(n)	IMX6SL_UART_BASE_ADDR(n)
+
 #define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT)
 
 #ifdef CONFIG_DEBUG_IMX1_UART
@@ -83,6 +91,8 @@
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX53)
 #elif defined(CONFIG_DEBUG_IMX6Q_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6Q)
+#elif defined(CONFIG_DEBUG_IMX6SL_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6SL)
 #endif
 
 #endif /* __DEBUG_IMX_UART_H */

arch/arm/include/debug/keystone.S

+/*
+ * Early serial debug output macro for Keystone SOCs
+ *
+ * Copyright 2013 Texas Instruments, Inc.
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on RMKs low level debug code.
+ *  Copyright (C) 1994-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+
+#define UART_SHIFT 2
+#if defined(CONFIG_DEBUG_KEYSTONE_UART0)
+#define UART_PHYS		0x02530c00
+#define UART_VIRT		0xfeb30c00
+#elif defined(CONFIG_DEBUG_KEYSTONE_UART1)
+#define UART_PHYS		0x02531000
+#define UART_VIRT		0xfeb31000
+#endif
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rv, =UART_VIRT			@ physical base address
+	ldr	\rp, =UART_PHYS			@ virtual base address
+	.endm
+
+	.macro	senduart,rd,rx
+	str	\rd, [\rx, #UART_TX << UART_SHIFT]
+	.endm
+
+	.macro	busyuart,rd,rx
+1002:	ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
+	and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+	teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+	bne	1002b
+	.endm
+
+	.macro	waituart,rd,rx
+	.endm

arch/arm/include/debug/mvebu.S

@@ -11,7 +11,12 @@
  * published by the Free Software Foundation.
 */
 
+#ifdef CONFIG_DEBUG_MVEBU_UART_ALTERNATE
+#define ARMADA_370_XP_REGS_PHYS_BASE	0xf1000000
+#else
 #define ARMADA_370_XP_REGS_PHYS_BASE	0xd0000000
+#endif
+
 #define ARMADA_370_XP_REGS_VIRT_BASE	0xfec00000
 
 	.macro	addruart, rp, rv, tmp

arch/arm/mach-clps711x/Kconfig

@@ -22,8 +22,7 @@ config ARCH_CLEP7312
 
 config ARCH_EDB7211
 	bool "EDB7211"
-	select ARCH_SELECT_MEMORY_MODEL
-	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
 	  evaluation board.