ARM: dts: kirkwood: Remove button address and fixup names

The DT compiler is now warning about unit names with addresses but not
reg property. Fix all the gpio-key buttons which causes warnings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts

@@ -36,13 +36,13 @@ gpio_poweroff {
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button@1{
+		reset {
 			label = "Reset";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		button@2{
+		button {
 			label = "Power";
 			linux,code = <KEY_SLEEP>;
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/kirkwood-cloudbox.dts

@@ -60,7 +60,7 @@ gpio_keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/kirkwood-dnskw.dtsi

@@ -13,17 +13,17 @@ gpio_keys {
 			     &pmx_button_reset>;
 		pinctrl-names = "default";
 
-		button@1 {
+		power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		eject {
 			label = "USB unmount button";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		button@3 {
+		reset {
 			label = "Reset button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/kirkwood-ib62x0.dts

@@ -62,12 +62,12 @@ gpio_keys {
 		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
 		pinctrl-names = "default";
 
-		button@1 {
+		copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -136,13 +136,13 @@ gpio_keys {
 		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
 		pinctrl-names = "default";
 
-		button@1 {
+		otb {
 			label = "OTB Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		button@2 {
+		reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/kirkwood-laplug.dts

@@ -62,7 +62,7 @@ pmx_usb_power_enable: pmx-usb-power-enable {
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button@1{
+		power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/kirkwood-lsxl.dtsi

@@ -107,18 +107,18 @@ gpio_keys {
 			     &pmx_power_auto_switch>;
 		pinctrl-names = "default";
 
-		button@1 {
+		option {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		reserved {
 			label = "Power-on Switch";
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
-		button@3 {
+		power {
 			label = "Power-auto Switch";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;

arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts

@@ -109,12 +109,12 @@ gpio_keys {
 		pinctrl-0 = <&pmx_keys>;
 		pinctrl-names = "default";
 
-		button@1 {
+		restart {
 			label = "SWR Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		wps {
 			label = "WPS Button";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/kirkwood-netxbig.dtsi

@@ -59,22 +59,22 @@ gpio-keys {
 		#size-cells = <0>;
 
 		/*
-		 * button@1 and button@2 represent a three position rocker
+		 * esc and power represent a three position rocker
 		 * switch. Thus the conventional KEY_POWER does not fit
 		 */
-		button@1 {
+		exc {
 			label = "Back power switch (on|auto)";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		power {
 			label = "Back power switch (auto|off)";
 			linux,code = <KEY_1>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		button@3 {
+		option {
 			label = "Function button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/kirkwood-ns2-common.dtsi

@@ -57,7 +57,7 @@ gpio_keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi

@@ -77,17 +77,17 @@ gpio_keys {
 		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
 		pinctrl-names = "default";
 
-		button@1 {
+		power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
-		button@2 {
+		copy {
 			label = "Copy Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
-		button@3 {
+		reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/kirkwood-openblocks_a6.dts

@@ -117,7 +117,7 @@ gpio_keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		power {
 			label = "Init Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/kirkwood-openblocks_a7.dts

@@ -135,7 +135,7 @@ gpio_keys {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		button@1 {
+		button {
 			label = "Init Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts

@@ -33,7 +33,7 @@ gpio_keys {
 		pinctrl-0 = <&pmx_button_eject>;
 		pinctrl-names = "default";
 
-		button@1 {
+		eject {
 			debounce_interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_EJECTCD>;

arch/arm/boot/dts/kirkwood-t5325.dts

@@ -173,7 +173,7 @@ gpio_keys {
 		pinctrl-0 = <&pmx_button_power>;
 		pinctrl-names = "default";
 
-		button@1 {
+		power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/kirkwood-ts219-6281.dts

@@ -39,12 +39,12 @@ gpio_keys {
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		button@1 {
+		copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/kirkwood-ts219-6282.dts

@@ -49,12 +49,12 @@ gpio_keys {
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		button@1 {
+		copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/kirkwood-ts419.dtsi

@@ -45,12 +45,12 @@ gpio_keys {
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		button@1 {
+		copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+		reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;