Commit 3a2fa775 authored by Carl Frederik Werner's avatar Carl Frederik Werner Committed by Tony Lindgren

ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again

Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio.

According to the OMAP35x Technical Reference Manual
  CONTROL_PADCONF_I2C3_SDA[15:0]  0x480021C4 mode0: i2c3_sda
  CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170
the pinmux address of gpio 170 must be 0x480021C6.

The former wrong address broke i2c3 (used by hdmi ddc), resulting in
kernel message:
  omap_i2c 48060000.i2c: controller timed out

Fixes: 8cecf52b ("ARM: omap3-beagle.dts: add display information")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: default avatarCarl Frederik Werner <frederik@cfbw.eu>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 6ff33f39
...@@ -202,7 +202,7 @@ uart3_pins: pinmux_uart3_pins { ...@@ -202,7 +202,7 @@ uart3_pins: pinmux_uart3_pins {
tfp410_pins: pinmux_tfp410_pins { tfp410_pins: pinmux_tfp410_pins {
pinctrl-single,pins = < pinctrl-single,pins = <
0x194 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
>; >;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment