Commit 3a53ff4d authored by Vojtech Pavlik's avatar Vojtech Pavlik

Merge suse.cz:/home/vojtech/bk/linus into suse.cz:/home/vojtech/bk/input

parents 0f19266d bcf65342
......@@ -890,8 +890,8 @@ running once the system is up.
psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports
per second.
psmouse.resetafter=
[HW,MOUSE] Try to reset Synaptics Touchpad after so many
bad packets (0 = never).
[HW,MOUSE] Try to reset the device after so many bad packets
(0 = never).
psmouse.resolution=
[HW,MOUSE] Set desired mouse resolution, in dpi.
psmouse.smartscroll=
......
CHANGES
- Created based off of scanner & INSTALL from the original touchscreen
- 0.3 - Created based off of scanner & INSTALL from the original touchscreen
driver on freshmeat (http://freshmeat.net/projects/3mtouchscreendriver)
- Amended for linux-2.4.18, then 2.4.19
- Complete rewrite using Linux Input in 2.6.3
- 0.5 - Complete rewrite using Linux Input in 2.6.3
Unfortunately no calibration support at this time
- 1.4 - Multiple changes to support the EXII 5000UC and house cleaning
Changed reset from standard USB dev reset to vendor reset
Changed data sent to host from compensated to raw coordinates
Eliminated vendor/product module params
Performed multiple successfull tests with an EXII-5010UC
DRIVER NOTES:
SUPPORTED HARDWARE:
All controllers have the Vendor: 0x0596 & Product: 0x0001
Installation is simple, you only need to add Linux Input, Linux USB, and the
driver to the kernel. The driver can also be optionally built as a module.
If you have another MicroTouch device that you wish to experiment with
or try using this driver with, but the Vendor and Product ID's are not
coded in, don't despair. If the driver was compiled as a module, you can
pass options to the driver. Simply try:
Controller Description Part Number
------------------------------------------------------
/sbin/modprobe mtouchusb vendor=0x#### product=0x****
USB Capacitive - Pearl Case 14-205 (Discontinued)
USB Capacitive - Black Case 14-124 (Discontinued)
USB Capacitive - No Case 14-206 (Discontinued)
If it works, send me the iVendor & iProduct (or a patch) and I will add...
USB Capacitive - Pearl Case EXII-5010UC
USB Capacitive - Black Case EXII-5030UC
USB Capacitive - No Case EXII-5050UC
DRIVER NOTES:
Installation is simple, you only need to add Linux Input, Linux USB, and the
driver to the kernel. The driver can also be optionally built as a module.
This driver appears to be one of possible 2 Linux USB Input Touchscreen
drivers. Although 3M produces a binary only driver available for
......@@ -28,53 +40,28 @@ download, I persist in updating this driver since I would like to use the
touchscreen for embedded apps using QTEmbedded, DirectFB, etc. So I feel the
logical choice is to use Linux Imput.
A little info about the MicroTouch USB controller (14-206):
Y is inverted, and the device has a total possible resolution of 0 - 65535.
Y is inverted by the driver by:
input.absmin[ABS_Y] = MTOUCHUSB_MAX_YC;
input.absmax[ABS_Y] = MTOUCHUSB_MIN_YC;
absmin & absmax are also used to scale the data, sine it is rather high
resolution.
---------------touch screen area-----------------
I MicroTouch (xmax,ymax) @I
I X I
I ########visible monitor area############## I
I #@ (xmin,ymin) # I
I # # I
I # # I
I # # I
I # # I
I # # I
I Y # # I
I # # I
I # # I
I # # I
I # # I
I # # I
I # (xmax,ymax) @# I
I ########################################## I
I I
I@ MicroTouch (xmin,ymin) I
-------------------------------------------------
Currently there is no way to calibrate the device via this driver. Perhaps
at some point an abstract function will be placed into evdev so generic
functions like calibrations, resets, and vendor information can be requested
(And the drivers would handle the vendor specific tasks).
ADDITIONAL INFORMATION/UPDATES:
Currently there is no way to calibrate the device via this driver. Even if
the device could be calibrated, the driver pulls to raw coordinate data from
the controller. This means calibration must be performed within the
userspace.
The controller screen resolution is now 0 to 16384 for both X and Y reporting
the raw touch data. This is the same for the old and new capacitive USB
controllers.
Perhaps at some point an abstract function will be placed into evdev so
generic functions like calibrations, resets, and vendor information can be
requested from the userspace (And the drivers would handle the vendor specific
tasks).
ADDITIONAL INFORMATION/UPDATES/X CONFIGURATION EXAMPLE:
http://groomlakelabs.com/grandamp/code/microtouch/
TODO:
Implement a control urb again to handle requests to and from the device
such as calibration, etc.
such as calibration, etc once/if it becomes available.
DISCLAMER:
......@@ -83,3 +70,7 @@ this driver! If you want touch drivers only supported within X, please go to:
http://www.3m.com/3MTouchSystems/downloads/
THANKS:
A huge thank you to 3M Touch Systems for the EXII-5010UC controllers for
testing!
......@@ -41,9 +41,16 @@ config INPUT_MOUSEDEV
module will be called mousedev.
config INPUT_MOUSEDEV_PSAUX
bool "Provide legacy /dev/psaux device" if EMBEDDED
bool "Provide legacy /dev/psaux device"
default y
depends on INPUT_MOUSEDEV
---help---
Say Y here if you want your mouse also be accessible as char device
10:1 - /dev/psaux. The data available through /dev/psaux is exactly
the same as the data from /dev/input/mice.
If unsure, say Y.
config INPUT_MOUSEDEV_SCREEN_X
int "Horizontal screen resolution"
......
......@@ -106,7 +106,7 @@ void input_event(struct input_dev *dev, unsigned int type, unsigned int code, in
}
break;
case EV_ABS:
if (code > ABS_MAX || !test_bit(code, dev->absbit))
......@@ -144,27 +144,27 @@ void input_event(struct input_dev *dev, unsigned int type, unsigned int code, in
if (code > MSC_MAX || !test_bit(code, dev->mscbit))
return;
if (dev->event) dev->event(dev, type, code, value);
if (dev->event) dev->event(dev, type, code, value);
break;
case EV_LED:
if (code > LED_MAX || !test_bit(code, dev->ledbit) || !!test_bit(code, dev->led) == value)
return;
change_bit(code, dev->led);
if (dev->event) dev->event(dev, type, code, value);
if (dev->event) dev->event(dev, type, code, value);
break;
case EV_SND:
if (code > SND_MAX || !test_bit(code, dev->sndbit))
return;
if (dev->event) dev->event(dev, type, code, value);
if (dev->event) dev->event(dev, type, code, value);
break;
case EV_REP:
......@@ -181,7 +181,7 @@ void input_event(struct input_dev *dev, unsigned int type, unsigned int code, in
break;
}
if (type != EV_SYN)
if (type != EV_SYN)
dev->sync = 0;
if (dev->grab)
......@@ -282,11 +282,11 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st
if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
if (id->id.vendor != dev->id.vendor)
continue;
if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
if (id->id.product != dev->id.product)
continue;
if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
if (id->id.version != dev->id.version)
continue;
......@@ -351,11 +351,11 @@ static void input_call_hotplug(char *verb, struct input_dev *dev)
}
if (in_interrupt()) {
printk(KERN_ERR "input.c: calling hotplug from interrupt\n");
return;
return;
}
if (!current->fs->root) {
printk(KERN_WARNING "input.c: calling hotplug without valid filesystem\n");
return;
return;
}
if (!(envp = (char **) kmalloc(20 * sizeof(char *), GFP_KERNEL))) {
printk(KERN_ERR "input.c: not enough memory allocating hotplug environment\n");
......@@ -381,17 +381,17 @@ static void input_call_hotplug(char *verb, struct input_dev *dev)
envp[i++] = scratch;
scratch += sprintf(scratch, "PRODUCT=%x/%x/%x/%x",
dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version) + 1;
dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version) + 1;
if (dev->name) {
envp[i++] = scratch;
scratch += sprintf(scratch, "NAME=%s", dev->name) + 1;
scratch += sprintf(scratch, "NAME=%s", dev->name) + 1;
}
if (dev->phys) {
envp[i++] = scratch;
scratch += sprintf(scratch, "PHYS=%s", dev->phys) + 1;
}
scratch += sprintf(scratch, "PHYS=%s", dev->phys) + 1;
}
SPRINTF_BIT_A(evbit, "EV=", EV_MAX);
SPRINTF_BIT_A2(keybit, "KEY=", KEY_MAX, EV_KEY);
......@@ -506,7 +506,7 @@ void input_register_handler(struct input_handler *handler)
input_table[handler->minor >> 5] = handler;
list_add_tail(&handler->node, &input_handler_list);
list_for_each_entry(dev, &input_dev_list, node)
if (!handler->blacklist || !input_match_device(handler->blacklist, dev))
if ((id = input_match_device(handler->id_table, dev)))
......
......@@ -26,7 +26,6 @@
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/workqueue.h>
#include <linux/timer.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_DESCRIPTION("AT and PS/2 keyboard driver");
......@@ -173,22 +172,24 @@ struct atkbd {
unsigned char keycode[512];
struct input_dev dev;
struct serio *serio;
struct timer_list timer;
char name[64];
char phys[32];
unsigned short id;
unsigned char set;
unsigned int translated:1;
unsigned int extra:1;
unsigned int write:1;
unsigned char cmdbuf[4];
unsigned char cmdcnt;
unsigned char set;
unsigned char extra;
unsigned char release;
int lastkey;
volatile signed char ack;
unsigned char emul;
unsigned short id;
unsigned char write;
unsigned char translated;
unsigned char resend;
unsigned char bat_xl;
unsigned int resend:1;
unsigned int release:1;
unsigned int bat_xl:1;
unsigned int enabled:1;
unsigned int last;
unsigned long time;
};
......@@ -248,6 +249,9 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
goto out;
}
if (!atkbd->enabled)
goto out;
if (atkbd->translated) {
if (atkbd->emul ||
......@@ -300,15 +304,20 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
case ATKBD_KEY_NULL:
break;
case ATKBD_KEY_UNKNOWN:
printk(KERN_WARNING "atkbd.c: Unknown key %s (%s set %d, code %#x on %s).\n",
atkbd->release ? "released" : "pressed",
atkbd->translated ? "translated" : "raw",
atkbd->set, code, serio->phys);
if (atkbd->translated && atkbd->set == 2 && code == 0x7a)
printk(KERN_WARNING "atkbd.c: This is an XFree86 bug. It shouldn't access"
" hardware directly.\n");
else
printk(KERN_WARNING "atkbd.c: Use 'setkeycodes %s%02x <keycode>' to make it known.\n", code & 0x80 ? "e0" : "", code & 0x7f);
if (data == ATKBD_RET_ACK || data == ATKBD_RET_NAK) {
printk(KERN_WARNING "atkbd.c: Spurious %s on %s. Some program, "
"like XFree86, might be trying access hardware directly.\n",
data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
} else {
printk(KERN_WARNING "atkbd.c: Unknown key %s "
"(%s set %d, code %#x on %s).\n",
atkbd->release ? "released" : "pressed",
atkbd->translated ? "translated" : "raw",
atkbd->set, code, serio->phys);
printk(KERN_WARNING "atkbd.c: Use 'setkeycodes %s%02x <keycode>' "
"to make it known.\n",
code & 0x80 ? "e0" : "", code & 0x7f);
}
break;
case ATKBD_SCR_1:
scroll = 1 - atkbd->release * 2;
......@@ -745,6 +754,8 @@ static void atkbd_connect(struct serio *serio, struct serio_dev *dev)
atkbd->id = 0xab00;
}
atkbd->enabled = 1;
if (atkbd->extra) {
atkbd->dev.ledbit[0] |= BIT(LED_COMPOSE) | BIT(LED_SUSPEND) | BIT(LED_SLEEP) | BIT(LED_MUTE) | BIT(LED_MISC);
sprintf(atkbd->name, "AT Set 2 Extra keyboard");
......@@ -809,12 +820,12 @@ static int atkbd_reconnect(struct serio *serio)
param[0] = (test_bit(LED_SCROLLL, atkbd->dev.led) ? 1 : 0)
| (test_bit(LED_NUML, atkbd->dev.led) ? 2 : 0)
| (test_bit(LED_CAPSL, atkbd->dev.led) ? 4 : 0);
if (atkbd_probe(atkbd))
return -1;
if (atkbd->set != atkbd_set_3(atkbd))
return -1;
atkbd_enable(atkbd);
if (atkbd_command(atkbd, param, ATKBD_CMD_SETLEDS))
......
......@@ -41,11 +41,11 @@ static int spkr98_event(struct input_dev *dev, unsigned int type, unsigned int c
case SND_BELL: if (value) value = 1000;
case SND_TONE: break;
default: return -1;
}
}
if (value > 20 && value < 32767)
count = CLOCK_TICK_RATE / value;
spin_lock_irqsave(&i8253_beep_lock, flags);
if (count) {
......
......@@ -40,11 +40,11 @@ static int pcspkr_event(struct input_dev *dev, unsigned int type, unsigned int c
case SND_BELL: if (value) value = 1000;
case SND_TONE: break;
default: return -1;
}
}
if (value > 20 && value < 32767)
count = CLOCK_TICK_RATE / value;
spin_lock_irqsave(&i8253_beep_lock, flags);
if (count) {
......
......@@ -53,11 +53,11 @@ static int ebus_spkr_event(struct input_dev *dev, unsigned int type, unsigned in
case SND_BELL: if (value) value = 1000;
case SND_TONE: break;
default: return -1;
}
}
if (value > 20 && value < 32767)
count = 1193182 / value;
spin_lock_irqsave(&beep_lock, flags);
/* EBUS speaker only has on/off state, the frequency does not
......@@ -108,11 +108,11 @@ static int isa_spkr_event(struct input_dev *dev, unsigned int type, unsigned int
case SND_BELL: if (value) value = 1000;
case SND_TONE: break;
default: return -1;
}
}
if (value > 20 && value < 32767)
count = 1193182 / value;
spin_lock_irqsave(&beep_lock, flags);
if (count) {
......
......@@ -18,7 +18,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
*
*
* Changes/Revisions:
* 0.1 20/06/2002
* - first public version
......@@ -68,7 +68,7 @@ static int uinput_dev_upload_effect(struct input_dev *dev, struct ff_effect *eff
static int uinput_dev_erase_effect(struct input_dev *dev, int effect_id)
{
return 0;
}
}
static int uinput_create_device(struct uinput_device *udev)
{
......@@ -123,7 +123,7 @@ static int uinput_open(struct inode *inode, struct file *file)
memset(newinput, 0, sizeof(struct input_dev));
newdev->dev = newinput;
file->private_data = newdev;
return 0;
......@@ -137,16 +137,16 @@ static int uinput_validate_absbits(struct input_dev *dev)
{
unsigned int cnt;
int retval = 0;
for (cnt = 0; cnt < ABS_MAX; cnt++) {
if (!test_bit(cnt, dev->absbit))
if (!test_bit(cnt, dev->absbit))
continue;
if (/*!dev->absmin[cnt] || !dev->absmax[cnt] || */
(dev->absmax[cnt] <= dev->absmin[cnt])) {
printk(KERN_DEBUG
printk(KERN_DEBUG
"%s: invalid abs[%02x] min:%d max:%d\n",
UINPUT_NAME, cnt,
UINPUT_NAME, cnt,
dev->absmin[cnt], dev->absmax[cnt]);
retval = -EINVAL;
break;
......@@ -154,7 +154,7 @@ static int uinput_validate_absbits(struct input_dev *dev)
if ((dev->absflat[cnt] < dev->absmin[cnt]) ||
(dev->absflat[cnt] > dev->absmax[cnt])) {
printk(KERN_DEBUG
printk(KERN_DEBUG
"%s: absflat[%02x] out of range: %d "
"(min:%d/max:%d)\n",
UINPUT_NAME, cnt, dev->absflat[cnt],
......@@ -190,7 +190,7 @@ static int uinput_alloc_device(struct file *file, const char *buffer, size_t cou
goto exit;
}
if (NULL != dev->name)
if (NULL != dev->name)
kfree(dev->name);
size = strnlen(user_dev->name, UINPUT_MAX_NAME_SIZE) + 1;
......@@ -229,7 +229,7 @@ static int uinput_alloc_device(struct file *file, const char *buffer, size_t cou
static ssize_t uinput_write(struct file *file, const char *buffer, size_t count, loff_t *ppos)
{
struct uinput_device *udev = file->private_data;
if (test_bit(UIST_CREATED, &(udev->state))) {
struct input_event ev;
......@@ -247,7 +247,7 @@ static ssize_t uinput_read(struct file *file, char *buffer, size_t count, loff_t
{
struct uinput_device *udev = file->private_data;
int retval = 0;
if (!test_bit(UIST_CREATED, &(udev->state)))
return -ENODEV;
......@@ -255,16 +255,16 @@ static ssize_t uinput_read(struct file *file, char *buffer, size_t count, loff_t
return -EAGAIN;
retval = wait_event_interruptible(udev->waitq,
(udev->head != udev->tail) ||
(udev->head != udev->tail) ||
!test_bit(UIST_CREATED, &(udev->state)));
if (retval)
return retval;
if (!test_bit(UIST_CREATED, &(udev->state)))
return -ENODEV;
while ((udev->head != udev->tail) &&
while ((udev->head != udev->tail) &&
(retval + sizeof(struct input_event) <= count)) {
if (copy_to_user(buffer + retval, &(udev->buff[udev->tail]),
sizeof(struct input_event))) return -EFAULT;
......@@ -284,7 +284,7 @@ static unsigned int uinput_poll(struct file *file, poll_table *wait)
if (udev->head != udev->tail)
return POLLIN | POLLRDNORM;
return 0;
return 0;
}
static int uinput_burn_device(struct uinput_device *udev)
......@@ -318,7 +318,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
case UI_DEV_CREATE:
retval = uinput_create_device(udev);
break;
case UI_DEV_DESTROY:
retval = uinput_destroy_device(udev);
break;
......@@ -330,7 +330,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->evbit);
break;
case UI_SET_KEYBIT:
if (arg > KEY_MAX) {
retval = -EINVAL;
......@@ -338,7 +338,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->keybit);
break;
case UI_SET_RELBIT:
if (arg > REL_MAX) {
retval = -EINVAL;
......@@ -346,7 +346,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->relbit);
break;
case UI_SET_ABSBIT:
if (arg > ABS_MAX) {
retval = -EINVAL;
......@@ -354,7 +354,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->absbit);
break;
case UI_SET_MSCBIT:
if (arg > MSC_MAX) {
retval = -EINVAL;
......@@ -362,7 +362,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->mscbit);
break;
case UI_SET_LEDBIT:
if (arg > LED_MAX) {
retval = -EINVAL;
......@@ -370,7 +370,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->ledbit);
break;
case UI_SET_SNDBIT:
if (arg > SND_MAX) {
retval = -EINVAL;
......@@ -378,7 +378,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->sndbit);
break;
case UI_SET_FFBIT:
if (arg > FF_MAX) {
retval = -EINVAL;
......@@ -386,7 +386,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
}
set_bit(arg, udev->dev->ffbit);
break;
default:
retval = -EFAULT;
}
......
......@@ -63,7 +63,6 @@ void ps2pp_process_packet(struct psmouse *psmouse)
packet[0] &= 0x0f;
packet[1] = 0;
packet[2] = 0;
}
}
......@@ -76,18 +75,9 @@ void ps2pp_process_packet(struct psmouse *psmouse)
static int ps2pp_cmd(struct psmouse *psmouse, unsigned char *param, unsigned char command)
{
unsigned char d;
int i;
if (psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11))
if (psmouse_sliced_command(psmouse, command))
return -1;
for (i = 6; i >= 0; i -= 2) {
d = (command >> i) & 3;
if(psmouse_command(psmouse, &d, PSMOUSE_CMD_SETRES))
return -1;
}
if (psmouse_command(psmouse, param, PSMOUSE_CMD_POLL))
return -1;
......@@ -99,7 +89,7 @@ static int ps2pp_cmd(struct psmouse *psmouse, unsigned char *param, unsigned cha
* enabled if we do nothing to it. Of course I put this in because I want it
* disabled :P
* 1 - enabled (if previously disabled, also default)
* 0/2 - disabled
* 0/2 - disabled
*/
static void ps2pp_set_smartscroll(struct psmouse *psmouse)
......@@ -113,14 +103,11 @@ static void ps2pp_set_smartscroll(struct psmouse *psmouse)
psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
if (psmouse_smartscroll == 1)
param[0] = 1;
else
if (psmouse_smartscroll > 2)
return;
/* else leave param[0] == 0 to disable */
psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
if (psmouse_smartscroll < 2) {
/* 0 - disabled, 1 - enabled */
param[0] = psmouse_smartscroll;
psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
}
}
/*
......@@ -138,111 +125,128 @@ void ps2pp_set_800dpi(struct psmouse *psmouse)
psmouse_command(psmouse, &param, PSMOUSE_CMD_SETRES);
}
static int is_model_in_list(unsigned char model, int *model_list)
{
int i;
for (i = 0; model_list[i] != -1; i++)
if (model == model_list[i])
return 1;
return 0;
}
/*
* Detect the exact model and features of a PS2++ or PS2T++ Logitech mouse or
* touchpad.
* Set up input device's properties based on the detected mouse model.
*/
static int ps2pp_detect_model(struct psmouse *psmouse, unsigned char *param)
static void ps2pp_set_properties(struct psmouse *psmouse, unsigned char protocol,
unsigned char model, unsigned char buttons)
{
int i;
static int logitech_4btn[] = { 12, 40, 41, 42, 43, 52, 73, 80, -1 };
static int logitech_wheel[] = { 52, 53, 75, 76, 80, 81, 83, 88, 112, -1 };
static int logitech_ps2pp[] = { 12, 13, 40, 41, 42, 43, 50, 51, 52, 53, 73, 75,
76, 80, 81, 83, 88, 96, 97, 112, -1 };
static int logitech_mx[] = { 61, 112, -1 };
psmouse->vendor = "Logitech";
psmouse->model = ((param[0] >> 4) & 0x07) | ((param[0] << 3) & 0x78);
psmouse->model = model;
if (param[1] < 3)
if (buttons < 3)
clear_bit(BTN_MIDDLE, psmouse->dev.keybit);
if (param[1] < 2)
if (buttons < 2)
clear_bit(BTN_RIGHT, psmouse->dev.keybit);
psmouse->type = PSMOUSE_PS2;
if (protocol == PSMOUSE_PS2PP) {
for (i = 0; logitech_ps2pp[i] != -1; i++)
if (logitech_ps2pp[i] == psmouse->model)
psmouse->type = PSMOUSE_PS2PP;
if (is_model_in_list(model, logitech_4btn))
set_bit(BTN_SIDE, psmouse->dev.keybit);
if (psmouse->type == PSMOUSE_PS2PP) {
if (is_model_in_list(model, logitech_wheel)) {
set_bit(REL_WHEEL, psmouse->dev.relbit);
psmouse->name = "Wheel Mouse";
}
for (i = 0; logitech_4btn[i] != -1; i++)
if (logitech_4btn[i] == psmouse->model)
set_bit(BTN_SIDE, psmouse->dev.keybit);
if (is_model_in_list(model, logitech_mx)) {
set_bit(BTN_SIDE, psmouse->dev.keybit);
set_bit(BTN_EXTRA, psmouse->dev.keybit);
set_bit(BTN_BACK, psmouse->dev.keybit);
set_bit(BTN_FORWARD, psmouse->dev.keybit);
set_bit(BTN_TASK, psmouse->dev.keybit);
psmouse->name = "MX Mouse";
}
}
for (i = 0; logitech_wheel[i] != -1; i++)
if (logitech_wheel[i] == psmouse->model) {
set_bit(REL_WHEEL, psmouse->dev.relbit);
psmouse->name = "Wheel Mouse";
}
if (protocol == PSMOUSE_PS2TPP) {
set_bit(REL_WHEEL, psmouse->dev.relbit);
set_bit(REL_HWHEEL, psmouse->dev.relbit);
psmouse->name = "TouchPad 3";
}
}
for (i = 0; logitech_mx[i] != -1; i++)
if (logitech_mx[i] == psmouse->model) {
set_bit(BTN_SIDE, psmouse->dev.keybit);
set_bit(BTN_EXTRA, psmouse->dev.keybit);
set_bit(BTN_BACK, psmouse->dev.keybit);
set_bit(BTN_FORWARD, psmouse->dev.keybit);
set_bit(BTN_TASK, psmouse->dev.keybit);
psmouse->name = "MX Mouse";
}
/*
* Do Logitech PS2++ / PS2T++ magic init.
* Logitech magic init. Detect whether the mouse is a Logitech one
* and its exact model and try turning on extended protocol for ones
* that support it.
*/
if (psmouse->model == 97) { /* TouchPad 3 */
int ps2pp_init(struct psmouse *psmouse, int set_properties)
{
static int logitech_ps2pp[] = { 12, 13, 40, 41, 42, 43, 50, 51, 52, 53, 73, 75,
76, 80, 81, 83, 88, 96, 97, 112, -1 };
unsigned char param[4];
unsigned char protocol = PSMOUSE_PS2;
unsigned char model, buttons;
param[0] = 0;
psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11);
psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11);
psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11);
param[1] = 0;
psmouse_command(psmouse, param, PSMOUSE_CMD_GETINFO);
set_bit(REL_WHEEL, psmouse->dev.relbit);
set_bit(REL_HWHEEL, psmouse->dev.relbit);
if (param[1] != 0) {
model = ((param[0] >> 4) & 0x07) | ((param[0] << 3) & 0x78);
buttons = param[1];
/*
* Do Logitech PS2++ / PS2T++ magic init.
*/
if (model == 97) { /* Touch Pad 3 */
param[0] = 0x11; param[1] = 0x04; param[2] = 0x68; /* Unprotect RAM */
/* Unprotect RAM */
param[0] = 0x11; param[1] = 0x04; param[2] = 0x68;
psmouse_command(psmouse, param, 0x30d1);
param[0] = 0x11; param[1] = 0x05; param[2] = 0x0b; /* Enable features */
/* Enable features */
param[0] = 0x11; param[1] = 0x05; param[2] = 0x0b;
psmouse_command(psmouse, param, 0x30d1);
param[0] = 0x11; param[1] = 0x09; param[2] = 0xc3; /* Enable PS2++ */
/* Enable PS2++ */
param[0] = 0x11; param[1] = 0x09; param[2] = 0xc3;
psmouse_command(psmouse, param, 0x30d1);
param[0] = 0;
if (!psmouse_command(psmouse, param, 0x13d1) &&
param[0] == 0x06 && param[1] == 0x00 && param[2] == 0x14) {
psmouse->name = "TouchPad 3";
return PSMOUSE_PS2TPP;
param[0] == 0x06 && param[1] == 0x00 && param[2] == 0x14) {
protocol = PSMOUSE_PS2TPP;
}
} else {
} else if (is_model_in_list(model, logitech_ps2pp)) {
param[0] = param[1] = param[2] = 0;
ps2pp_cmd(psmouse, param, 0x39); /* Magic knock */
ps2pp_cmd(psmouse, param, 0xDB);
if ((param[0] & 0x78) == 0x48 && (param[1] & 0xf3) == 0xc2 &&
(param[2] & 3) == ((param[1] >> 2) & 3)) {
ps2pp_set_smartscroll(psmouse);
return PSMOUSE_PS2PP;
if ((param[0] & 0x78) == 0x48 &&
(param[1] & 0xf3) == 0xc2 &&
(param[2] & 0x03) == ((param[1] >> 2) & 3)) {
ps2pp_set_smartscroll(psmouse);
protocol = PSMOUSE_PS2PP;
}
}
}
return 0;
}
/*
* Logitech magic init.
*/
int ps2pp_detect(struct psmouse *psmouse)
{
unsigned char param[4];
param[0] = 0;
psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11);
psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11);
psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11);
param[1] = 0;
psmouse_command(psmouse, param, PSMOUSE_CMD_GETINFO);
if (set_properties)
ps2pp_set_properties(psmouse, protocol, model, buttons);
}
return param[1] != 0 ? ps2pp_detect_model(psmouse, param) : 0;
return protocol;
}
......@@ -10,8 +10,9 @@
#ifndef _LOGIPS2PP_H
#define _LOGIPS2PP_H
struct psmouse;
void ps2pp_process_packet(struct psmouse *psmouse);
void ps2pp_set_800dpi(struct psmouse *psmouse);
int ps2pp_detect(struct psmouse *psmouse);
int ps2pp_init(struct psmouse *psmouse, int set_properties);
#endif
......@@ -43,9 +43,9 @@ int psmouse_smartscroll = 1;
module_param_named(smartscroll, psmouse_smartscroll, bool, 0);
MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled.");
unsigned int psmouse_resetafter;
static unsigned int psmouse_resetafter;
module_param_named(resetafter, psmouse_resetafter, uint, 0);
MODULE_PARM_DESC(resetafter, "Reset Synaptics Touchpad after so many bad packets (0 = never).");
MODULE_PARM_DESC(resetafter, "Reset device after so many bad packets (0 = never).");
__obsolete_setup("psmouse_noext");
__obsolete_setup("psmouse_resolution=");
......@@ -56,15 +56,22 @@ __obsolete_setup("psmouse_rate=");
static char *psmouse_protocols[] = { "None", "PS/2", "PS2++", "PS2T++", "GenPS/2", "ImPS/2", "ImExPS/2", "SynPS/2"};
/*
* psmouse_process_packet() analyzes the PS/2 mouse packet contents and
* reports relevant events to the input module.
* psmouse_process_byte() analyzes the PS/2 data stream and reports
* relevant events to the input module once full packet has arrived.
*/
static void psmouse_process_packet(struct psmouse *psmouse, struct pt_regs *regs)
static psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse, struct pt_regs *regs)
{
struct input_dev *dev = &psmouse->dev;
unsigned char *packet = psmouse->packet;
if (psmouse->pktcnt < 3 + (psmouse->type >= PSMOUSE_GENPS))
return PSMOUSE_GOOD_DATA;
/*
* Full packet accumulated, process it
*/
input_regs(dev, regs);
/*
......@@ -112,6 +119,8 @@ static void psmouse_process_packet(struct psmouse *psmouse, struct pt_regs *regs
input_report_rel(dev, REL_Y, packet[2] ? (int) ((packet[0] << 3) & 0x100) - (int) packet[2] : 0);
input_sync(dev);
return PSMOUSE_FULL_PACKET;
}
/*
......@@ -123,6 +132,7 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
unsigned char data, unsigned int flags, struct pt_regs *regs)
{
struct psmouse *psmouse = serio->private;
psmouse_ret_t rc;
if (psmouse->state == PSMOUSE_IGNORE)
goto out;
......@@ -180,7 +190,7 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
if (psmouse->pktcnt == 2) {
if (psmouse->packet[1] == PSMOUSE_RET_ID) {
psmouse->state = PSMOUSE_IGNORE;
serio_rescan(serio);
serio_reconnect(serio);
goto out;
}
if (psmouse->type == PSMOUSE_SYNAPTICS) {
......@@ -193,19 +203,32 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
}
}
if (psmouse->type == PSMOUSE_SYNAPTICS) {
/*
* The synaptics driver has its own resync logic,
* so it needs to receive all bytes one at a time.
*/
synaptics_process_byte(psmouse, regs);
goto out;
}
rc = psmouse->protocol_handler(psmouse, regs);
if (psmouse->pktcnt == 3 + (psmouse->type >= PSMOUSE_GENPS)) {
psmouse_process_packet(psmouse, regs);
psmouse->pktcnt = 0;
goto out;
switch (rc) {
case PSMOUSE_BAD_DATA:
printk(KERN_WARNING "psmouse.c: %s at %s lost sync at byte %d\n",
psmouse->name, psmouse->phys, psmouse->pktcnt);
psmouse->pktcnt = 0;
if (++psmouse->out_of_sync == psmouse_resetafter) {
psmouse->state = PSMOUSE_IGNORE;
printk(KERN_NOTICE "psmouse.c: issuing reconnect request\n");
serio_reconnect(psmouse->serio);
}
break;
case PSMOUSE_FULL_PACKET:
psmouse->pktcnt = 0;
if (psmouse->out_of_sync) {
psmouse->out_of_sync = 0;
printk(KERN_NOTICE "psmouse.c: %s at %s - driver resynched.\n",
psmouse->name, psmouse->phys);
}
break;
case PSMOUSE_GOOD_DATA:
break;
}
out:
return IRQ_HANDLED;
......@@ -288,6 +311,30 @@ int psmouse_command(struct psmouse *psmouse, unsigned char *param, int command)
}
/*
* psmouse_sliced_command() sends an extended PS/2 command to the mouse
* using sliced syntax, understood by advanced devices, such as Logitech
* or Synaptics touchpads. The command is encoded as:
* 0xE6 0xE8 rr 0xE8 ss 0xE8 tt 0xE8 uu where (rr*64)+(ss*16)+(tt*4)+uu
* is the command.
*/
int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command)
{
int i;
if (psmouse_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11))
return -1;
for (i = 6; i >= 0; i -= 2) {
unsigned char d = (command >> i) & 3;
if (psmouse_command(psmouse, &d, PSMOUSE_CMD_SETRES))
return -1;
}
return 0;
}
/*
* psmouse_reset() resets the mouse into power-on state.
*/
......@@ -363,23 +410,23 @@ static int im_explorer_detect(struct psmouse *psmouse)
* the mouse may have.
*/
static int psmouse_extensions(struct psmouse *psmouse)
static int psmouse_extensions(struct psmouse *psmouse,
unsigned int max_proto, int set_properties)
{
int synaptics_hardware = 0;
psmouse->vendor = "Generic";
psmouse->name = "Mouse";
psmouse->model = 0;
/*
* Try Synaptics TouchPad
*/
if (psmouse_max_proto > PSMOUSE_PS2 && synaptics_detect(psmouse)) {
if (max_proto > PSMOUSE_PS2 && synaptics_detect(psmouse)) {
synaptics_hardware = 1;
psmouse->vendor = "Synaptics";
psmouse->name = "TouchPad";
if (psmouse_max_proto > PSMOUSE_IMEX) {
if (set_properties) {
psmouse->vendor = "Synaptics";
psmouse->name = "TouchPad";
}
if (max_proto > PSMOUSE_IMEX) {
if (synaptics_init(psmouse) == 0)
return PSMOUSE_SYNAPTICS;
/*
......@@ -387,7 +434,7 @@ static int psmouse_extensions(struct psmouse *psmouse)
* Unfortunately Logitech/Genius probes confuse some firmware versions so
* we'll have to skip them.
*/
psmouse_max_proto = PSMOUSE_IMEX;
max_proto = PSMOUSE_IMEX;
}
/*
* Make sure that touchpad is in relative mode, gestures (taps) are enabled
......@@ -395,35 +442,45 @@ static int psmouse_extensions(struct psmouse *psmouse)
synaptics_reset(psmouse);
}
if (psmouse_max_proto > PSMOUSE_IMEX && genius_detect(psmouse)) {
set_bit(BTN_EXTRA, psmouse->dev.keybit);
set_bit(BTN_SIDE, psmouse->dev.keybit);
set_bit(REL_WHEEL, psmouse->dev.relbit);
if (max_proto > PSMOUSE_IMEX && genius_detect(psmouse)) {
if (set_properties) {
set_bit(BTN_EXTRA, psmouse->dev.keybit);
set_bit(BTN_SIDE, psmouse->dev.keybit);
set_bit(REL_WHEEL, psmouse->dev.relbit);
psmouse->vendor = "Genius";
psmouse->name = "Wheel Mouse";
}
psmouse->vendor = "Genius";
psmouse->name = "Wheel Mouse";
return PSMOUSE_GENPS;
}
if (psmouse_max_proto > PSMOUSE_IMEX) {
int type = ps2pp_detect(psmouse);
if (type)
if (max_proto > PSMOUSE_IMEX) {
int type = ps2pp_init(psmouse, set_properties);
if (type > PSMOUSE_PS2)
return type;
}
if (psmouse_max_proto >= PSMOUSE_IMPS && intellimouse_detect(psmouse)) {
set_bit(REL_WHEEL, psmouse->dev.relbit);
if (max_proto >= PSMOUSE_IMPS && intellimouse_detect(psmouse)) {
if (psmouse_max_proto >= PSMOUSE_IMEX &&
im_explorer_detect(psmouse)) {
set_bit(BTN_SIDE, psmouse->dev.keybit);
set_bit(BTN_EXTRA, psmouse->dev.keybit);
if (set_properties) {
set_bit(REL_WHEEL, psmouse->dev.relbit);
if (!psmouse->name)
psmouse->name = "Wheel Mouse";
}
if (max_proto >= PSMOUSE_IMEX && im_explorer_detect(psmouse)) {
if (!set_properties) {
set_bit(BTN_SIDE, psmouse->dev.keybit);
set_bit(BTN_EXTRA, psmouse->dev.keybit);
if (!psmouse->name)
psmouse->name = "Explorer Mouse";
}
psmouse->name = "Explorer Mouse";
return PSMOUSE_IMEX;
}
psmouse->name = "Wheel Mouse";
return PSMOUSE_IMPS;
}
......@@ -473,12 +530,7 @@ static int psmouse_probe(struct psmouse *psmouse)
if (psmouse_command(psmouse, NULL, PSMOUSE_CMD_RESET_DIS))
printk(KERN_WARNING "psmouse.c: Failed to reset mouse on %s\n", psmouse->serio->phys);
/*
* And here we try to determine if it has any extensions over the
* basic PS/2 3-button mouse.
*/
return psmouse->type = psmouse_extensions(psmouse);
return 0;
}
/*
......@@ -616,7 +668,6 @@ static void psmouse_connect(struct serio *serio, struct serio_dev *dev)
psmouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
psmouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
psmouse->state = PSMOUSE_CMD_MODE;
psmouse->serio = serio;
psmouse->dev.private = psmouse;
......@@ -628,13 +679,21 @@ static void psmouse_connect(struct serio *serio, struct serio_dev *dev)
return;
}
if (psmouse_probe(psmouse) <= 0) {
if (psmouse_probe(psmouse) < 0) {
serio_close(serio);
kfree(psmouse);
serio->private = NULL;
return;
}
psmouse->type = psmouse_extensions(psmouse, psmouse_max_proto, 1);
if (!psmouse->vendor)
psmouse->vendor = "Generic";
if (!psmouse->name)
psmouse->name = "Mouse";
if (!psmouse->protocol_handler)
psmouse->protocol_handler = psmouse_process_byte;
sprintf(psmouse->devname, "%s %s %s",
psmouse_protocols[psmouse->type], psmouse->vendor, psmouse->name);
sprintf(psmouse->phys, "%s/input0",
......@@ -668,27 +727,24 @@ static int psmouse_reconnect(struct serio *serio)
{
struct psmouse *psmouse = serio->private;
struct serio_dev *dev = serio->dev;
int old_type;
if (!dev || !psmouse) {
printk(KERN_DEBUG "psmouse: reconnect request, but serio is disconnected, ignoring...\n");
return -1;
}
old_type = psmouse->type;
psmouse->state = PSMOUSE_CMD_MODE;
psmouse->type = psmouse->acking = psmouse->cmdcnt = psmouse->pktcnt = 0;
psmouse->acking = psmouse->cmdcnt = psmouse->pktcnt = psmouse->out_of_sync = 0;
if (psmouse->reconnect) {
if (psmouse->reconnect(psmouse))
return -1;
} else if (psmouse_probe(psmouse) != old_type)
} else if (psmouse_probe(psmouse) < 0 ||
psmouse->type != psmouse_extensions(psmouse, psmouse_max_proto, 0))
return -1;
/* ok, the device type (and capabilities) match the old one,
* we can continue using it, complete intialization
*/
psmouse->type = old_type;
psmouse_initialize(psmouse);
if (psmouse->ptport) {
......
......@@ -22,6 +22,13 @@
#define PSMOUSE_ACTIVATED 1
#define PSMOUSE_IGNORE 2
/* psmouse protocol handler return codes */
typedef enum {
PSMOUSE_BAD_DATA,
PSMOUSE_GOOD_DATA,
PSMOUSE_FULL_PACKET
} psmouse_ret_t;
struct psmouse;
struct psmouse_ptport {
......@@ -45,6 +52,7 @@ struct psmouse {
unsigned char type;
unsigned char model;
unsigned long last;
unsigned long out_of_sync;
unsigned char state;
char acking;
volatile char ack;
......@@ -52,6 +60,7 @@ struct psmouse {
char devname[64];
char phys[32];
psmouse_ret_t (*protocol_handler)(struct psmouse *psmouse, struct pt_regs *regs);
int (*reconnect)(struct psmouse *psmouse);
void (*disconnect)(struct psmouse *psmouse);
};
......@@ -65,10 +74,10 @@ struct psmouse {
#define PSMOUSE_SYNAPTICS 7
int psmouse_command(struct psmouse *psmouse, unsigned char *param, int command);
int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command);
int psmouse_reset(struct psmouse *psmouse);
extern int psmouse_smartscroll;
extern unsigned int psmouse_rate;
extern unsigned int psmouse_resetafter;
#endif /* _PSMOUSE_H */
This diff is collapsed.
......@@ -9,7 +9,6 @@
#ifndef _SYNAPTICS_H
#define _SYNAPTICS_H
extern void synaptics_process_byte(struct psmouse *psmouse, struct pt_regs *regs);
extern int synaptics_detect(struct psmouse *psmouse);
extern int synaptics_init(struct psmouse *psmouse);
extern void synaptics_reset(struct psmouse *psmouse);
......@@ -44,13 +43,14 @@ extern void synaptics_reset(struct psmouse *psmouse);
/* synaptics capability bits */
#define SYN_CAP_EXTENDED(c) ((c) & (1 << 23))
#define SYN_CAP_MIDDLE_BUTTON(c) ((c) & (1 << 18))
#define SYN_CAP_PASS_THROUGH(c) ((c) & (1 << 7))
#define SYN_CAP_SLEEP(c) ((c) & (1 << 4))
#define SYN_CAP_FOUR_BUTTON(c) ((c) & (1 << 3))
#define SYN_CAP_MULTIFINGER(c) ((c) & (1 << 1))
#define SYN_CAP_PALMDETECT(c) ((c) & (1 << 0))
#define SYN_CAP_VALID(c) ((((c) & 0x00ff00) >> 8) == 0x47)
#define SYN_EXT_CAP_REQUESTS(c) ((((c) & 0x700000) >> 20) == 1)
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
/* synaptics modes query bits */
......@@ -86,18 +86,12 @@ struct synaptics_hw_state {
int y;
int z;
int w;
int left;
int right;
int up;
int down;
int b0;
int b1;
int b2;
int b3;
int b4;
int b5;
int b6;
int b7;
unsigned int left:1;
unsigned int right:1;
unsigned int middle:1;
unsigned int up:1;
unsigned int down:1;
unsigned char ext_buttons;
};
struct synaptics_data {
......@@ -108,7 +102,6 @@ struct synaptics_data {
unsigned long int identity; /* Identification */
/* Data for normal processing */
unsigned int out_of_sync; /* # of packets out of sync */
int old_w; /* Previous w value */
unsigned char pkt_type; /* packet type - old, new, etc */
};
......
......@@ -391,9 +391,9 @@ static ssize_t mousedev_write(struct file * file, const char * buffer, size_t co
list->impsseq = 0;
list->imexseq = 0;
list->mode = 0;
list->ps2[0] = 0xaa;
list->ps2[1] = 0x00;
list->bufsiz = 2;
list->ps2[1] = 0xaa;
list->ps2[2] = 0x00;
list->bufsiz = 3;
break;
}
......
......@@ -474,8 +474,17 @@ static int i8042_enable_mux_mode(struct i8042_values *values, unsigned char *mux
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xa9)
return -1;
param = 0xa4;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == 0x5b)
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == 0x5b) {
/*
* Do another loop test with the 0x5a value. Doing anything else upsets
* Profusion/ServerWorks OSB4 chipsets.
*/
param = 0x5a;
i8042_command(&param, I8042_CMD_AUX_LOOP);
return -1;
}
if (mux_version)
*mux_version = ~param;
......@@ -532,8 +541,8 @@ static int __init i8042_check_mux(struct i8042_values *values)
return -1;
/* Workaround for broken chips which seem to support MUX, but in reality don't. */
/* They all report version 12.10 */
if (mux_version == 0xCA)
/* They all report version 10.12 */
if (mux_version == 0xAC)
return -1;
printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
......
......@@ -86,20 +86,9 @@ static int parkbd_write(struct serio *port, unsigned char c)
return 0;
}
static int parkbd_open(struct serio *port)
{
return 0;
}
static void parkbd_close(struct serio *port)
{
}
static struct serio parkbd_port =
{
.write = parkbd_write,
.open = parkbd_open,
.close = parkbd_close,
.name = parkbd_name,
.phys = parkbd_phys,
};
......
......@@ -47,23 +47,12 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Q40 PS/2 keyboard controller driver");
MODULE_LICENSE("GPL");
static int q40kbd_open(struct serio *port)
{
return 0;
}
static void q40kbd_close(struct serio *port)
{
}
static struct serio q40kbd_port =
{
.type = SERIO_8042,
.name = "Q40 kbd port",
.phys = "Q40",
.write = NULL,
.open = q40kbd_open,
.close = q40kbd_close,
};
static irqreturn_t q40kbd_interrupt(int irq, void *dev_id,
......
......@@ -11,18 +11,18 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
......@@ -108,7 +108,7 @@ void serio_handle_events(void)
struct serio_event *event;
list_for_each_safe(node, next, &serio_event_list) {
event = container_of(node, struct serio_event, node);
event = container_of(node, struct serio_event, node);
down(&serio_sem);
if (event->serio == NULL)
......@@ -152,7 +152,7 @@ static int serio_thread(void *nothing)
do {
serio_handle_events();
wait_event_interruptible(serio_wait, !list_empty(&serio_event_list));
wait_event_interruptible(serio_wait, !list_empty(&serio_event_list));
if (current->flags & PF_FREEZE)
refrigerator(PF_FREEZE);
} while (!signal_pending(current));
......@@ -293,7 +293,7 @@ void serio_unregister_device(struct serio_dev *dev)
int serio_open(struct serio *serio, struct serio_dev *dev)
{
serio->dev = dev;
if (serio->open(serio)) {
if (serio->open && serio->open(serio)) {
serio->dev = NULL;
return -1;
}
......@@ -303,7 +303,8 @@ int serio_open(struct serio *serio, struct serio_dev *dev)
/* called from serio_dev->connect/disconnect methods under serio_sem */
void serio_close(struct serio *serio)
{
serio->close(serio);
if (serio->close)
serio->close(serio);
serio->dev = NULL;
}
......
......@@ -48,11 +48,6 @@ static int serport_serio_write(struct serio *serio, unsigned char data)
return -(serport->tty->driver->write(serport->tty, 0, &data, 1) != 1);
}
static int serport_serio_open(struct serio *serio)
{
return 0;
}
static void serport_serio_close(struct serio *serio)
{
struct serport *serport = serio->driver;
......@@ -87,7 +82,6 @@ static int serport_ldisc_open(struct tty_struct *tty)
serport->serio.type = SERIO_RS232;
serport->serio.write = serport_serio_write;
serport->serio.open = serport_serio_open;
serport->serio.close = serport_serio_close;
serport->serio.driver = serport;
......@@ -135,7 +129,7 @@ static int serport_ldisc_room(struct tty_struct *tty)
}
/*
* serport_ldisc_read() just waits indefinitely if everything goes well.
* serport_ldisc_read() just waits indefinitely if everything goes well.
* However, when the serio driver closes the serio port, it finishes,
* returning 0 characters.
*/
......@@ -165,7 +159,7 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u
static int serport_ldisc_ioctl(struct tty_struct * tty, struct file * file, unsigned int cmd, unsigned long arg)
{
struct serport *serport = (struct serport*) tty->disc_data;
if (cmd == SPIOCSTYPE)
return get_user(serport->serio.type, (unsigned long *) arg);
......
......@@ -124,12 +124,10 @@ static void gunze_connect(struct serio *serio, struct serio_dev *dev)
memset(gunze, 0, sizeof(struct gunze));
init_input_dev(&gunze->dev);
gunze->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
gunze->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
gunze->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
gunze->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
gunze->dev.absmin[ABS_X] = 96; gunze->dev.absmin[ABS_Y] = 72;
gunze->dev.absmax[ABS_X] = 4000; gunze->dev.absmax[ABS_Y] = 3000;
input_set_abs_params(&gunze->dev, ABS_X, 96, 4000, 0, 0);
input_set_abs_params(&gunze->dev, ABS_Y, 72, 3000, 0, 0);
gunze->serio = serio;
serio->private = gunze;
......
/*
* $Id: h3600_ts_input.c,v 1.4 2002/01/23 06:39:37 jsimmons Exp $
*
* Copyright (c) 2001 "Crazy" James Simmons jsimmons@transvirtual.com
* Copyright (c) 2001 "Crazy" James Simmons jsimmons@transvirtual.com
*
* Sponsored by Transvirtual Technology.
*
* Derived from the code in h3600_ts.[ch] by Charles Flynn
* Sponsored by Transvirtual Technology.
*
* Derived from the code in h3600_ts.[ch] by Charles Flynn
*/
/*
......@@ -75,7 +75,7 @@
#define MAX_ID 14
#define H3600_MAX_LENGTH 16
#define H3600_KEY 0xf
#define H3600_KEY 0xf
#define H3600_SCANCODE_RECORD 1 /* 1 -> record button */
#define H3600_SCANCODE_CALENDAR 2 /* 2 -> calendar */
......@@ -118,13 +118,13 @@ static void npower_button_handler(int irq, void *dev_id, struct pt_regs *regs)
int down = (GPLR & GPIO_BITSY_NPOWER_BUTTON) ? 0 : 1;
struct input_dev *dev = (struct input_dev *) dev_id;
/*
* This interrupt is only called when we release the key. So we have
/*
* This interrupt is only called when we release the key. So we have
* to fake a key press.
*/
*/
input_regs(dev, regs);
input_report_key(dev, KEY_SUSPEND, 1);
input_report_key(dev, KEY_SUSPEND, down);
input_report_key(dev, KEY_SUSPEND, down);
input_sync(dev);
}
......@@ -144,18 +144,18 @@ unsigned int h3600_flite_power(struct input_dev *dev, enum flite_pwr pwr)
unsigned char brightness = ((pwr==FLITE_PWR_OFF) ? 0:flite_brightness);
struct h3600_dev *ts = dev->private;
/* Must be in this order */
/* Must be in this order */
ts->serio->write(ts->serio, 1);
ts->serio->write(ts->serio, pwr);
ts->serio->write(ts->serio, brightness);
ts->serio->write(ts->serio, brightness);
return 0;
}
static int suspended = 0;
static int h3600ts_pm_callback(struct pm_dev *pm_dev, pm_request_t req,
static int h3600ts_pm_callback(struct pm_dev *pm_dev, pm_request_t req,
void *data)
{
struct input_dev *dev = (struct input_dev *) data;
struct input_dev *dev = (struct input_dev *) data;
switch (req) {
case PM_SUSPEND: /* enter D1-D3 */
......@@ -183,7 +183,7 @@ static int h3600ts_pm_callback(struct pm_dev *pm_dev, pm_request_t req,
/*
* This function translates the native event packets to linux input event
* packets. Some packets coming from serial are not touchscreen related. In
* this case we send them off to be processed elsewhere.
* this case we send them off to be processed elsewhere.
*/
static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs)
{
......@@ -206,7 +206,7 @@ static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs)
Note: This is true for non interrupt generated key events.
*/
case KEYBD_ID:
down = (ts->buf[0] & 0x80) ? 0 : 1;
down = (ts->buf[0] & 0x80) ? 0 : 1;
switch (ts->buf[0] & 0x7f) {
case H3600_SCANCODE_RECORD:
......@@ -218,7 +218,7 @@ static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs)
case H3600_SCANCODE_CONTACTS:
key = KEY_PROG2;
break;
case H3600_SCANCODE_Q:
case H3600_SCANCODE_Q:
key = KEY_Q;
break;
case H3600_SCANCODE_START:
......@@ -237,9 +237,9 @@ static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs)
key = KEY_DOWN;
break;
default:
key = 0;
}
if (key)
key = 0;
}
if (key)
input_report_key(dev, key, down);
break;
/*
......@@ -251,13 +251,13 @@ static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs)
* byte 0 1 2 3
*/
case TOUCHS_ID:
if (!touched) {
if (!touched) {
input_report_key(dev, BTN_TOUCH, 1);
touched = 1;
}
}
if (ts->len) {
unsigned short x, y;
unsigned short x, y;
x = ts->buf[0]; x <<= 8; x += ts->buf[1];
y = ts->buf[2]; y <<= 8; y += ts->buf[3];
......@@ -267,7 +267,7 @@ static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs)
} else {
input_report_key(dev, BTN_TOUCH, 0);
touched = 0;
}
}
break;
default:
/* Send a non input event elsewhere */
......@@ -280,7 +280,7 @@ static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs)
/*
* h3600ts_event() handles events from the input module.
*/
static int h3600ts_event(struct input_dev *dev, unsigned int type,
static int h3600ts_event(struct input_dev *dev, unsigned int type,
unsigned int code, int value)
{
struct h3600_dev *ts = dev->private;
......@@ -290,7 +290,7 @@ static int h3600ts_event(struct input_dev *dev, unsigned int type,
// ts->serio->write(ts->serio, SOME_CMD);
return 0;
}
}
}
return -1;
}
......@@ -323,12 +323,12 @@ static void h3600ts_interrupt(struct serio *serio, unsigned char data,
struct h3600_dev *ts = serio->private;
/*
* We have a new frame coming in.
* We have a new frame coming in.
*/
switch (state) {
case STATE_SOF:
if (data == CHAR_SOF)
state = STATE_ID;
state = STATE_ID;
return;
case STATE_ID:
ts->event = (data & 0xf0) >> 4;
......@@ -344,7 +344,7 @@ static void h3600ts_interrupt(struct serio *serio, unsigned char data,
case STATE_DATA:
ts->chksum += data;
ts->buf[ts->idx]= data;
if(++ts->idx == ts->len)
if(++ts->idx == ts->len)
state = STATE_EOF;
break;
case STATE_EOF:
......@@ -382,7 +382,7 @@ static void h3600ts_connect(struct serio *serio, struct serio_dev *dev)
set_GPIO_IRQ_edge( GPIO_BITSY_NPOWER_BUTTON, GPIO_RISING_EDGE );
if (request_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, action_button_handler,
SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM,
SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM,
"h3600_action", &ts->dev)) {
printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n");
kfree(ts);
......@@ -390,24 +390,19 @@ static void h3600ts_connect(struct serio *serio, struct serio_dev *dev)
}
if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM,
SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM,
"h3600_suspend", &ts->dev)) {
free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev);
printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n");
kfree(ts);
return;
}
/* Now we have things going we setup our input device */
ts->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_LED) | BIT(EV_PWR);
ts->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
ts->dev.ledbit[0] = BIT(LED_SLEEP);
ts->dev.absmin[ABS_X] = 60; ts->dev.absmin[ABS_Y] = 35;
ts->dev.absmax[ABS_X] = 985; ts->dev.absmax[ABS_Y] = 1024;
ts->dev.absfuzz[ABS_X] = 0; ts->dev.absfuzz[ABS_Y] = 0;
ts->serio = serio;
serio->private = ts;
ts->dev.ledbit[0] = BIT(LED_SLEEP);
input_set_abs_params(&ts->dev, ABS_X, 60, 985, 0, 0);
input_set_abs_params(&ts->dev, ABS_Y, 35, 1024, 0, 0);
set_bit(KEY_RECORD, ts->dev.keybit);
set_bit(KEY_Q, ts->dev.keybit);
......@@ -422,6 +417,9 @@ static void h3600ts_connect(struct serio *serio, struct serio_dev *dev)
ts->dev.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
ts->dev.keybit[LONG(KEY_SUSPEND)] |= BIT(KEY_SUSPEND);
ts->serio = serio;
serio->private = ts;
sprintf(ts->phys, "%s/input0", serio->phys);
ts->dev.event = h3600ts_event;
......@@ -442,7 +440,7 @@ static void h3600ts_connect(struct serio *serio, struct serio_dev *dev)
//h3600_flite_control(1, 25); /* default brightness */
#ifdef CONFIG_PM
ts->dev.pm_dev = pm_register(PM_ILLUMINATION_DEV, PM_SYS_LIGHT,
ts->dev.pm_dev = pm_register(PM_ILLUMINATION_DEV, PM_SYS_LIGHT,
h3600ts_pm_callback);
printk("registered pm callback\n");
#endif
......@@ -458,7 +456,7 @@ static void h3600ts_connect(struct serio *serio, struct serio_dev *dev)
static void h3600ts_disconnect(struct serio *serio)
{
struct h3600_dev *ts = serio->private;
free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev);
free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, &ts->dev);
input_unregister_device(&ts->dev);
......
......@@ -28,6 +28,12 @@
* Complete rewrite using Linux Input in 2.6.3
* Unfortunately no calibration support at this time
*
* 1.4 04/25/2004 (TEJ) tejohnson@yahoo.com
* Changed reset from standard USB dev reset to vendor reset
* Changed data sent to host from compensated to raw coordinates
* Eliminated vendor/product module params
* Performed multiple successfull tests with an EXII-5010UC
*
*****************************************************************************/
#include <linux/config.h>
......@@ -45,25 +51,28 @@
#include <linux/init.h>
#include <linux/usb.h>
#define MTOUCHUSB_MIN_XC 0xc8
#define MTOUCHUSB_MAX_XC 0xff78
#define MTOUCHUSB_MIN_XC 0x0
#define MTOUCHUSB_MAX_XC 0x4000
#define MTOUCHUSB_XC_FUZZ 0x0
#define MTOUCHUSB_XC_FLAT 0x0
#define MTOUCHUSB_MIN_YC 0x0
#define MTOUCHUSB_MAX_YC 0xff78
#define MTOUCHUSB_MAX_YC 0x4000
#define MTOUCHUSB_YC_FUZZ 0x0
#define MTOUCHUSB_YC_FLAT 0x0
#define MTOUCHUSB_ASYC_REPORT 1
#define MTOUCHUSB_REPORT_SIZE_DATA 11
#define MTOUCHUSB_ASYNC_REPORT 1
#define MTOUCHUSB_RESET 7
#define MTOUCHUSB_REPORT_DATA_SIZE 11
#define MTOUCHUSB_REQ_CTRLLR_ID 10
#define MTOUCHUSB_GET_XC(data) (data[4]<<8 | data[3])
#define MTOUCHUSB_GET_YC(data) (data[6]<<8 | data[5])
#define MTOUCHUSB_GET_XC(data) (data[8]<<8 | data[7])
#define MTOUCHUSB_GET_YC(data) (data[10]<<8 | data[9])
#define MTOUCHUSB_GET_TOUCHED(data) ((data[2] & 0x40) ? 1:0)
#define DRIVER_VERSION "v0.1"
#define DRIVER_VERSION "v1.4"
#define DRIVER_AUTHOR "Todd E. Johnson, tejohnson@yahoo.com"
#define DRIVER_DESC "Microtouch USB HID Touchscreen Driver"
#define DRIVER_DESC "3M USB Touchscreen Driver"
#define DRIVER_LICENSE "GPL"
struct mtouch_usb {
unsigned char *data;
......@@ -76,11 +85,9 @@ struct mtouch_usb {
char phys[64];
};
static __s32 vendor=-1, product=-1;
static struct usb_device_id mtouchusb_devices [] = {
{ USB_DEVICE(0x0596, 0x0001) }, /* 3M (Formerly MicroTouch) 14-206 */
{ } /* Terminating entry */
{ USB_DEVICE(0x0596, 0x0001) },
{ }
};
static void mtouchusb_irq(struct urb *urb, struct pt_regs *regs)
......@@ -153,7 +160,7 @@ static int mtouchusb_alloc_buffers(struct usb_device *udev, struct mtouch_usb *m
{
dbg("%s - called", __FUNCTION__);
mtouch->data = usb_buffer_alloc(udev, MTOUCHUSB_REPORT_SIZE_DATA,
mtouch->data = usb_buffer_alloc(udev, MTOUCHUSB_REPORT_DATA_SIZE,
SLAB_ATOMIC, &mtouch->data_dma);
if (!mtouch->data)
......@@ -167,7 +174,7 @@ static void mtouchusb_free_buffers(struct usb_device *udev, struct mtouch_usb *m
dbg("%s - called", __FUNCTION__);
if (mtouch->data)
usb_buffer_free(udev, MTOUCHUSB_REPORT_SIZE_DATA,
usb_buffer_free(udev, MTOUCHUSB_REPORT_DATA_SIZE,
mtouch->data, mtouch->data_dma);
}
......@@ -180,41 +187,8 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i
char path[64];
char *buf;
int nRet;
int ix;
char valid_device = 0;
dbg("%s - called", __FUNCTION__);
if (vendor != -1 && product != -1) {
info("%s - User specified USB Touch -- Vend:Prod - %x:%x",
__FUNCTION__, vendor, product);
}
for (ix = 0; ix < sizeof (mtouchusb_devices) /
sizeof (struct usb_device_id); ix++) {
if ((udev->descriptor.idVendor ==
mtouchusb_devices [ix].idVendor) &&
(udev->descriptor.idProduct ==
mtouchusb_devices [ix].idProduct)) {
valid_device = 1;
break;
}
}
if (udev->descriptor.idVendor == vendor &&
udev->descriptor.idProduct == product) { /* User specified */
valid_device = 1;
}
if (!valid_device) {
err("%s - No valid device!", __FUNCTION__);
return -EIO;
}
if (udev->descriptor.bNumConfigurations != 1) {
err("%s - Only one device configuration is supported.",
__FUNCTION__);
return -EIO;
}
dbg("%s - setting interface", __FUNCTION__);
interface = intf->cur_altsetting;
......@@ -222,11 +196,6 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i
dbg("%s - setting endpoint", __FUNCTION__);
endpoint = &interface->endpoint[0].desc;
if (interface->desc.bNumEndpoints != 1) {
err("%s - Only one endpoint is supported.", __FUNCTION__);
return -EIO;
}
if (!(mtouch = kmalloc (sizeof (struct mtouch_usb), GFP_KERNEL))) {
err("%s - Out of memory.", __FUNCTION__);
return -ENOMEM;
......@@ -266,8 +235,8 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i
mtouch->input.absmax[ABS_X] = MTOUCHUSB_MAX_XC;
mtouch->input.absfuzz[ABS_X] = MTOUCHUSB_XC_FUZZ;
mtouch->input.absflat[ABS_X] = MTOUCHUSB_XC_FLAT;
mtouch->input.absmin[ABS_Y] = MTOUCHUSB_MAX_YC;
mtouch->input.absmax[ABS_Y] = MTOUCHUSB_MIN_YC;
mtouch->input.absmin[ABS_Y] = MTOUCHUSB_MIN_YC;
mtouch->input.absmax[ABS_Y] = MTOUCHUSB_MAX_YC;
mtouch->input.absfuzz[ABS_Y] = MTOUCHUSB_YC_FUZZ;
mtouch->input.absflat[ABS_Y] = MTOUCHUSB_YC_FLAT;
......@@ -290,15 +259,15 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i
kfree(buf);
nRet = usb_control_msg(mtouch->udev,
usb_rcvctrlpipe(udev, 0x80),
USB_REQ_GET_CONFIGURATION,
USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
usb_rcvctrlpipe(udev, 0),
MTOUCHUSB_RESET,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1,
0,
0x81,
NULL,
0,
HZ * USB_CTRL_SET_TIMEOUT);
dbg("%s - usb_control_msg - USB_REQ_GET_CONFIGURATION - bytes|err: %d",
dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
__FUNCTION__, nRet);
dbg("%s - usb_alloc_urb: mtouch->irq", __FUNCTION__);
......@@ -315,7 +284,7 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i
mtouch->udev,
usb_rcvintpipe(mtouch->udev, 0x81),
mtouch->data,
MTOUCHUSB_REPORT_SIZE_DATA,
MTOUCHUSB_REPORT_DATA_SIZE,
mtouchusb_irq,
mtouch,
endpoint->bInterval);
......@@ -324,15 +293,15 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i
input_register_device(&mtouch->input);
nRet = usb_control_msg(mtouch->udev,
usb_rcvctrlpipe(udev, 0x80),
MTOUCHUSB_ASYC_REPORT,
usb_rcvctrlpipe(udev, 0),
MTOUCHUSB_ASYNC_REPORT,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
MTOUCHUSB_ASYC_REPORT,
MTOUCHUSB_ASYC_REPORT,
1,
1,
NULL,
0,
HZ * USB_CTRL_SET_TIMEOUT);
dbg("%s - usb_control_msg - MTOUCHUSB_ASYC_REPORT - bytes|err: %d",
dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
__FUNCTION__, nRet);
printk(KERN_INFO "input: %s on %s\n", mtouch->name, path);
......@@ -383,9 +352,3 @@ module_exit(mtouchusb_cleanup);
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");
MODULE_PARM(vendor, "i");
MODULE_PARM_DESC(vendor, "User specified USB idVendor");
MODULE_PARM(product, "i");
MODULE_PARM_DESC(product, "User specified USB idProduct");
......@@ -655,7 +655,7 @@ struct ff_periodic_effect {
struct ff_envelope envelope;
/* Only used if waveform == FF_CUSTOM */
__u32 custom_len; /* Number of samples */
__u32 custom_len; /* Number of samples */
__s16 *custom_data; /* Buffer of samples */
/* Note: the data pointed by custom_data is copied by the driver. You can
* therefore dispose of the memory after the upload/update */
......@@ -749,8 +749,6 @@ struct ff_effect {
#define INPUT_KEYCODE(dev, scancode) ((dev->keycodesize == 1) ? ((u8*)dev->keycode)[scancode] : \
((dev->keycodesize == 2) ? ((u16*)dev->keycode)[scancode] : (((u32*)dev->keycode)[scancode])))
#define init_input_dev(dev) do { INIT_LIST_HEAD(&((dev)->h_list)); INIT_LIST_HEAD(&((dev)->node)); } while (0)
#define SET_INPUT_KEYCODE(dev, scancode, val) \
({ unsigned __old; \
switch (dev->keycodesize) { \
......@@ -915,6 +913,12 @@ struct input_handle {
#define to_handle(n) container_of(n,struct input_handle,d_node)
#define to_handle_h(n) container_of(n,struct input_handle,h_node)
static inline void init_input_dev(struct input_dev *dev)
{
INIT_LIST_HEAD(&dev->h_list);
INIT_LIST_HEAD(&dev->node);
}
void input_register_device(struct input_dev *);
void input_unregister_device(struct input_dev *);
......@@ -932,14 +936,51 @@ int input_flush_device(struct input_handle* handle, struct file* file);
void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
#define input_report_key(a,b,c) input_event(a, EV_KEY, b, !!(c))
#define input_report_rel(a,b,c) input_event(a, EV_REL, b, c)
#define input_report_abs(a,b,c) input_event(a, EV_ABS, b, c)
#define input_report_ff(a,b,c) input_event(a, EV_FF, b, c)
#define input_report_ff_status(a,b,c) input_event(a, EV_FF_STATUS, b, c)
#define input_regs(a,b) do { (a)->regs = (b); } while (0)
#define input_sync(a) do { input_event(a, EV_SYN, SYN_REPORT, 0); (a)->regs = NULL; } while (0)
static inline void input_report_key(struct input_dev *dev, unsigned int code, int value)
{
input_event(dev, EV_KEY, code, !!value);
}
static inline void input_report_rel(struct input_dev *dev, unsigned int code, int value)
{
input_event(dev, EV_REL, code, value);
}
static inline void input_report_abs(struct input_dev *dev, unsigned int code, int value)
{
input_event(dev, EV_ABS, code, value);
}
static inline void input_report_ff(struct input_dev *dev, unsigned int code, int value)
{
input_event(dev, EV_FF, code, value);
}
static inline void input_report_ff_status(struct input_dev *dev, unsigned int code, int value)
{
input_event(dev, EV_FF_STATUS, code, value);
}
static inline void input_regs(struct input_dev *dev, struct pt_regs *regs)
{
dev->regs = regs;
}
static inline void input_sync(struct input_dev *dev)
{
input_event(dev, EV_SYN, SYN_REPORT, 0);
dev->regs = NULL;
}
static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat)
{
dev->absmin[axis] = min;
dev->absmax[axis] = max;
dev->absfuzz[axis] = fuzz;
dev->absflat[axis] = flat;
dev->absbit[LONG(axis)] |= BIT(axis);
}
extern struct class_simple *input_class;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment