Merge tag 'davinci-for-v3.16/edma' of...

Merge tag 'davinci-for-v3.16/edma' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/drivers

Merge "DaVinci EDMA clean-up for v3.16" from Sekhar Nori:

This series makes edma use configuration information available within
the IP instead of reading it from platform data or DT. Some other useful
clean-ups are included too.

* tag 'davinci-for-v3.16/edma' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: (34 commits)
  ARM: edma: Remove redundant/unused parameters from edma_soc_info
  ARM: davinci: Remove redundant/unused parameters for edma
  ARM: dts: am4372: Remove obsolete properties from edma node
  ARM: dts: am33xx: Remove obsolete properties from edma node
  dt/bindings: ti,edma: Remove redundant properties from documentation
  ARM: edma: Get IP configuration from HW (number of channels, tc, etc)
  ARM: edma: Save number of regions from pdata to struct edma
  ARM: edma: Remove num_cc member from struct edma
  ARM: edma: Remove queue_tc_mapping data from edma_soc_info
  ARM: davinci: Remove eDMA3 queue_tc_mapping data from edma_soc_info
  ARM: edma: Do not change TC -> Queue mapping, leave it to default.
  ARM: edma: Take the number of tc from edma_soc_info (pdata)
  ARM: edma: No need to clean the pdata in edma_of_parse_dt()
  ARM: edma: Clean up and simplify the code around irq request
  dmaengine: edma: update DMA memcpy to use new param element
  dmaengine: edma: Document variables used for residue accounting
  dmaengine: edma: Provide granular accounting
  dmaengine: edma: Make reading the position of active channels work
  dmaengine: edma: Store transfer data in edma_desc and edma_pset
  dmaengine: edma: Create private pset struct
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/dma/ti-edma.txt

@@ -2,11 +2,8 @@ TI EDMA
 
 Required properties:
 - compatible : "ti,edma3"
-- ti,edma-regions: Number of regions
-- ti,edma-slots: Number of slots
 - #dma-cells: Should be set to <1>
               Clients should use a single channel number per DMA request.
-- dma-channels: Specify total DMA channels per CC
 - reg: Memory map for accessing module
 - interrupt-parent: Interrupt controller the interrupt is routed through
 - interrupts: Exactly 3 interrupts need to be specified in the order:
@@ -17,6 +14,13 @@ Optional properties:
 - ti,hwmods: Name of the hwmods associated to the EDMA
 - ti,edma-xbar-event-map: Crossbar event to channel map
 
+Deprecated properties:
+Listed here in case one wants to boot an old kernel with new DTB. These
+properties might need to be added to the new DTS files.
+- ti,edma-regions: Number of regions
+- ti,edma-slots: Number of slots
+- dma-channels: Specify total DMA channels per CC
+
 Example:
 
 edma: edma@49000000 {
@@ -26,9 +30,6 @@ edma: edma@49000000 {
 	compatible = "ti,edma3";
 	ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
 	#dma-cells = <1>;
-	dma-channels = <64>;
-	ti,edma-regions = <4>;
-	ti,edma-slots = <256>;
 	ti,edma-xbar-event-map = /bits/ 16 <1 12
 					    2 13>;
 };

arch/arm/boot/dts/am33xx.dtsi

@@ -147,9 +147,6 @@ edma: edma@49000000 {
 				<0x44e10f90 0x40>;
 			interrupts = <12 13 14>;
 			#dma-cells = <1>;
-			dma-channels = <64>;
-			ti,edma-regions = <4>;
-			ti,edma-slots = <256>;
 		};
 
 		gpio0: gpio@44e07000 {

arch/arm/boot/dts/am4372.dtsi

@@ -108,9 +108,6 @@ edma: edma@49000000 {
 					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			dma-channels = <64>;
-			ti,edma-regions = <4>;
-			ti,edma-slots = <256>;
 		};
 
 		uart0: serial@44e09000 {

arch/arm/common/edma.c

@@ -102,7 +102,13 @@
 #define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
 
 #define EDMA_DCHMAP	0x0100  /* 64 registers */
-#define CHMAP_EXIST	BIT(24)
+
+/* CCCFG register */
+#define GET_NUM_DMACH(x)	(x & 0x7) /* bits 0-2 */
+#define GET_NUM_PAENTRY(x)	((x & 0x7000) >> 12) /* bits 12-14 */
+#define GET_NUM_EVQUE(x)	((x & 0x70000) >> 16) /* bits 16-18 */
+#define GET_NUM_REGN(x)		((x & 0x300000) >> 20) /* bits 20-21 */
+#define CHMAP_EXIST		BIT(24)
 
 #define EDMA_MAX_DMACH           64
 #define EDMA_MAX_PARAMENTRY     512
@@ -233,7 +239,6 @@ struct edma {
 	unsigned	num_region;
 	unsigned	num_slots;
 	unsigned	num_tc;
-	unsigned	num_cc;
 	enum dma_event_q 	default_queue;
 
 	/* list of channels with no even trigger; terminated by "-1" */
@@ -290,12 +295,6 @@ static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
 			~(0x7 << bit), queue_no << bit);
 }
 
-static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no)
-{
-	int bit = queue_no * 4;
-	edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
-}
-
 static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
 		int priority)
 {
@@ -994,29 +993,23 @@ void edma_set_dest(unsigned slot, dma_addr_t dest_port,
 EXPORT_SYMBOL(edma_set_dest);
 
 /**
- * edma_get_position - returns the current transfer points
+ * edma_get_position - returns the current transfer point
  * @slot: parameter RAM slot being examined
- * @src: pointer to source port position
- * @dst: pointer to destination port position
+ * @dst:  true selects the dest position, false the source
  *
- * Returns current source and destination addresses for a particular
- * parameter RAM slot.  Its channel should not be active when this is called.
+ * Returns the position of the current active slot
  */
-void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
+dma_addr_t edma_get_position(unsigned slot, bool dst)
 {
-	struct edmacc_param temp;
-	unsigned ctlr;
+	u32 offs, ctlr = EDMA_CTLR(slot);
 
-	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	edma_read_slot(EDMA_CTLR_CHAN(ctlr, slot), &temp);
-	if (src != NULL)
-		*src = temp.src;
-	if (dst != NULL)
-		*dst = temp.dst;
+	offs = PARM_OFFSET(slot);
+	offs += dst ? PARM_DST : PARM_SRC;
+
+	return edma_read(ctlr, offs);
 }
-EXPORT_SYMBOL(edma_get_position);
 
 /**
  * edma_set_src_index - configure DMA source address indexing
@@ -1421,6 +1414,67 @@ void edma_clear_event(unsigned channel)
 }
 EXPORT_SYMBOL(edma_clear_event);
 
+static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
+			      struct edma *edma_cc)
+{
+	int i;
+	u32 value, cccfg;
+	s8 (*queue_priority_map)[2];
+
+	/* Decode the eDMA3 configuration from CCCFG register */
+	cccfg = edma_read(0, EDMA_CCCFG);
+
+	value = GET_NUM_REGN(cccfg);
+	edma_cc->num_region = BIT(value);
+
+	value = GET_NUM_DMACH(cccfg);
+	edma_cc->num_channels = BIT(value + 1);
+
+	value = GET_NUM_PAENTRY(cccfg);
+	edma_cc->num_slots = BIT(value + 4);
+
+	value = GET_NUM_EVQUE(cccfg);
+	edma_cc->num_tc = value + 1;
+
+	dev_dbg(dev, "eDMA3 HW configuration (cccfg: 0x%08x):\n", cccfg);
+	dev_dbg(dev, "num_region: %u\n", edma_cc->num_region);
+	dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels);
+	dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots);
+	dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc);
+
+	/* Nothing need to be done if queue priority is provided */
+	if (pdata->queue_priority_mapping)
+		return 0;
+
+	/*
+	 * Configure TC/queue priority as follows:
+	 * Q0 - priority 0
+	 * Q1 - priority 1
+	 * Q2 - priority 2
+	 * ...
+	 * The meaning of priority numbers: 0 highest priority, 7 lowest
+	 * priority. So Q0 is the highest priority queue and the last queue has
+	 * the lowest priority.
+	 */
+	queue_priority_map = devm_kzalloc(dev,
+					  (edma_cc->num_tc + 1) * sizeof(s8),
+					  GFP_KERNEL);
+	if (!queue_priority_map)
+		return -ENOMEM;
+
+	for (i = 0; i < edma_cc->num_tc; i++) {
+		queue_priority_map[i][0] = i;
+		queue_priority_map[i][1] = i;
+	}
+	queue_priority_map[i][0] = -1;
+	queue_priority_map[i][1] = -1;
+
+	pdata->queue_priority_mapping = queue_priority_map;
+	pdata->default_queue = 0;
+
+	return 0;
+}
+
 #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
 
 static int edma_xbar_event_map(struct device *dev, struct device_node *node,
@@ -1471,65 +1525,16 @@ static int edma_of_parse_dt(struct device *dev,
 			    struct device_node *node,
 			    struct edma_soc_info *pdata)
 {
-	int ret = 0, i;
-	u32 value;
+	int ret = 0;
 	struct property *prop;
 	size_t sz;
 	struct edma_rsv_info *rsv_info;
-	s8 (*queue_tc_map)[2], (*queue_priority_map)[2];
-
-	memset(pdata, 0, sizeof(struct edma_soc_info));
-
-	ret = of_property_read_u32(node, "dma-channels", &value);
-	if (ret < 0)
-		return ret;
-	pdata->n_channel = value;
-
-	ret = of_property_read_u32(node, "ti,edma-regions", &value);
-	if (ret < 0)
-		return ret;
-	pdata->n_region = value;
-
-	ret = of_property_read_u32(node, "ti,edma-slots", &value);
-	if (ret < 0)
-		return ret;
-	pdata->n_slot = value;
-
-	pdata->n_cc = 1;
 
 	rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
 	if (!rsv_info)
 		return -ENOMEM;
 	pdata->rsv = rsv_info;
 
-	queue_tc_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
-	if (!queue_tc_map)
-		return -ENOMEM;
-
-	for (i = 0; i < 3; i++) {
-		queue_tc_map[i][0] = i;
-		queue_tc_map[i][1] = i;
-	}
-	queue_tc_map[i][0] = -1;
-	queue_tc_map[i][1] = -1;
-
-	pdata->queue_tc_mapping = queue_tc_map;
-
-	queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
-	if (!queue_priority_map)
-		return -ENOMEM;
-
-	for (i = 0; i < 3; i++) {
-		queue_priority_map[i][0] = i;
-		queue_priority_map[i][1] = i;
-	}
-	queue_priority_map[i][0] = -1;
-	queue_priority_map[i][1] = -1;
-
-	pdata->queue_priority_mapping = queue_priority_map;
-
-	pdata->default_queue = 0;
-
 	prop = of_find_property(node, "ti,edma-xbar-event-map", &sz);
 	if (prop)
 		ret = edma_xbar_event_map(dev, node, pdata, sz);
@@ -1556,6 +1561,7 @@ static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
 		return ERR_PTR(ret);
 
 	dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
+	dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap);
 	of_dma_controller_register(dev->of_node, of_dma_simple_xlate,
 				   &edma_filter_info);
 
@@ -1574,7 +1580,6 @@ static int edma_probe(struct platform_device *pdev)
 	struct edma_soc_info	**info = pdev->dev.platform_data;
 	struct edma_soc_info    *ninfo[EDMA_MAX_CC] = {NULL};
 	s8		(*queue_priority_mapping)[2];
-	s8		(*queue_tc_mapping)[2];
 	int			i, j, off, ln, found = 0;
 	int			status = -1;
 	const s16		(*rsv_chans)[2];
@@ -1585,7 +1590,6 @@ static int edma_probe(struct platform_device *pdev)
 	struct resource		*r[EDMA_MAX_CC] = {NULL};
 	struct resource		res[EDMA_MAX_CC];
 	char			res_name[10];
-	char			irq_name[10];
 	struct device_node	*node = pdev->dev.of_node;
 	struct device		*dev = &pdev->dev;
 	int			ret;
@@ -1650,12 +1654,10 @@ static int edma_probe(struct platform_device *pdev)
 		if (!edma_cc[j])
 			return -ENOMEM;
 
-		edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
-							EDMA_MAX_DMACH);
-		edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot,
-							EDMA_MAX_PARAMENTRY);
-		edma_cc[j]->num_cc = min_t(unsigned, info[j]->n_cc,
-							EDMA_MAX_CC);
+		/* Get eDMA3 configuration from IP */
+		ret = edma_setup_from_hw(dev, info[j], edma_cc[j]);
+		if (ret)
+			return ret;
 
 		edma_cc[j]->default_queue = info[j]->default_queue;
 
@@ -1707,14 +1709,21 @@ static int edma_probe(struct platform_device *pdev)
 
 		if (node) {
 			irq[j] = irq_of_parse_and_map(node, 0);
+			err_irq[j] = irq_of_parse_and_map(node, 2);
 		} else {
+			char irq_name[10];
+
 			sprintf(irq_name, "edma%d", j);
 			irq[j] = platform_get_irq_byname(pdev, irq_name);
+
+			sprintf(irq_name, "edma%d_err", j);
+			err_irq[j] = platform_get_irq_byname(pdev, irq_name);
 		}
 		edma_cc[j]->irq_res_start = irq[j];
-		status = devm_request_irq(&pdev->dev, irq[j],
-					  dma_irq_handler, 0, "edma",
-					  &pdev->dev);
+		edma_cc[j]->irq_res_end = err_irq[j];
+
+		status = devm_request_irq(dev, irq[j], dma_irq_handler, 0,
+					  "edma", dev);
 		if (status < 0) {
 			dev_dbg(&pdev->dev,
 				"devm_request_irq %d failed --> %d\n",
@@ -1722,16 +1731,8 @@ static int edma_probe(struct platform_device *pdev)
 			return status;
 		}
 
-		if (node) {
-			err_irq[j] = irq_of_parse_and_map(node, 2);
-		} else {
-			sprintf(irq_name, "edma%d_err", j);
-			err_irq[j] = platform_get_irq_byname(pdev, irq_name);
-		}
-		edma_cc[j]->irq_res_end = err_irq[j];
-		status = devm_request_irq(&pdev->dev, err_irq[j],
-					  dma_ccerr_handler, 0,
-					  "edma_error", &pdev->dev);
+		status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0,
+					  "edma_error", dev);
 		if (status < 0) {
 			dev_dbg(&pdev->dev,
 				"devm_request_irq %d failed --> %d\n",
@@ -1742,14 +1743,8 @@ static int edma_probe(struct platform_device *pdev)
 		for (i = 0; i < edma_cc[j]->num_channels; i++)
 			map_dmach_queue(j, i, info[j]->default_queue);
 
-		queue_tc_mapping = info[j]->queue_tc_mapping;
 		queue_priority_mapping = info[j]->queue_priority_mapping;
 
-		/* Event queue to TC mapping */
-		for (i = 0; queue_tc_mapping[i][0] != -1; i++)
-			map_queue_tc(j, queue_tc_mapping[i][0],
-					queue_tc_mapping[i][1]);
-
 		/* Event queue priority mapping */
 		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
 			assign_priority_to_queue(j,
@@ -1762,7 +1757,7 @@ static int edma_probe(struct platform_device *pdev)
 		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
 			map_dmach_param(j);
 
-		for (i = 0; i < info[j]->n_region; i++) {
+		for (i = 0; i < edma_cc[j]->num_region; i++) {
 			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
 			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
 			edma_write_array(j, EDMA_QRAE, i, 0x0);

arch/arm/mach-davinci/devices-da8xx.c

@@ -134,13 +134,6 @@ struct platform_device da8xx_serial_device[] = {
 	}
 };
 
-static s8 da8xx_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1}
-};
-
 static s8 da8xx_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
@@ -148,12 +141,6 @@ static s8 da8xx_queue_priority_mapping[][2] = {
 	{-1, -1}
 };
 
-static s8 da850_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{-1, -1}
-};
-
 static s8 da850_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
@@ -161,12 +148,6 @@ static s8 da850_queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info da830_edma_cc0_info = {
-	.n_channel		= 32,
-	.n_region		= 4,
-	.n_slot			= 128,
-	.n_tc			= 2,
-	.n_cc			= 1,
-	.queue_tc_mapping	= da8xx_queue_tc_mapping,
 	.queue_priority_mapping	= da8xx_queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
@@ -177,22 +158,10 @@ static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
 
 static struct edma_soc_info da850_edma_cc_info[] = {
 	{
-		.n_channel		= 32,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 2,
-		.n_cc			= 1,
-		.queue_tc_mapping	= da8xx_queue_tc_mapping,
 		.queue_priority_mapping	= da8xx_queue_priority_mapping,
 		.default_queue		= EVENTQ_1,
 	},
 	{
-		.n_channel		= 32,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 1,
-		.n_cc			= 1,
-		.queue_tc_mapping	= da850_queue_tc_mapping,
 		.queue_priority_mapping	= da850_queue_priority_mapping,
 		.default_queue		= EVENTQ_0,
 	},

arch/arm/mach-davinci/dm355.c

@@ -568,14 +568,6 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static s8
-queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1},
-};
-
 static s8
 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
@@ -585,12 +577,6 @@ queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 4,
-	.n_slot			= 128,
-	.n_tc			= 2,
-	.n_cc			= 1,
-	.queue_tc_mapping	= queue_tc_mapping,
 	.queue_priority_mapping	= queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };

arch/arm/mach-davinci/dm365.c

@@ -852,16 +852,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 };
 
 /* Four Transfer Controllers on DM365 */
-static s8
-dm365_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{2, 2},
-	{3, 3},
-	{-1, -1},
-};
-
 static s8
 dm365_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
@@ -873,12 +863,6 @@ dm365_queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 4,
-	.n_slot			= 256,
-	.n_tc			= 4,
-	.n_cc			= 1,
-	.queue_tc_mapping	= dm365_queue_tc_mapping,
 	.queue_priority_mapping	= dm365_queue_priority_mapping,
 	.default_queue		= EVENTQ_3,
 };

arch/arm/mach-davinci/dm644x.c

@@ -498,14 +498,6 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static s8
-queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1},
-};
-
 static s8
 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
@@ -515,12 +507,6 @@ queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 4,
-	.n_slot			= 128,
-	.n_tc			= 2,
-	.n_cc			= 1,
-	.queue_tc_mapping	= queue_tc_mapping,
 	.queue_priority_mapping	= queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };

arch/arm/mach-davinci/dm646x.c

@@ -532,16 +532,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 /*----------------------------------------------------------------------*/
 
 /* Four Transfer Controllers on DM646x */
-static s8
-dm646x_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{2, 2},
-	{3, 3},
-	{-1, -1},
-};
-
 static s8
 dm646x_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
@@ -553,12 +543,6 @@ dm646x_queue_priority_mapping[][2] = {
 };
 
 static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 6,	/* 0-1, 4-7 */
-	.n_slot			= 512,
-	.n_tc			= 4,
-	.n_cc			= 1,
-	.queue_tc_mapping	= dm646x_queue_tc_mapping,
 	.queue_priority_mapping	= dm646x_queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };

include/linux/platform_data/edma.h

@@ -43,15 +43,15 @@
 
 /* PaRAM slots are laid out like this */
 struct edmacc_param {
-	unsigned int opt;
-	unsigned int src;
-	unsigned int a_b_cnt;
-	unsigned int dst;
-	unsigned int src_dst_bidx;
-	unsigned int link_bcntrld;
-	unsigned int src_dst_cidx;
-	unsigned int ccnt;
-};
+	u32 opt;
+	u32 src;
+	u32 a_b_cnt;
+	u32 dst;
+	u32 src_dst_bidx;
+	u32 link_bcntrld;
+	u32 src_dst_cidx;
+	u32 ccnt;
+} __packed;
 
 /* fields in edmacc_param.opt */
 #define SAM		BIT(0)
@@ -130,7 +130,7 @@ void edma_set_src(unsigned slot, dma_addr_t src_port,
 				enum address_mode mode, enum fifo_width);
 void edma_set_dest(unsigned slot, dma_addr_t dest_port,
 				 enum address_mode mode, enum fifo_width);
-void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+dma_addr_t edma_get_position(unsigned slot, bool dst);
 void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
 void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
 void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
@@ -158,13 +158,6 @@ struct edma_rsv_info {
 
 /* platform_data for EDMA driver */
 struct edma_soc_info {
-
-	/* how many dma resources of each type */
-	unsigned	n_channel;
-	unsigned	n_region;
-	unsigned	n_slot;
-	unsigned	n_tc;
-	unsigned	n_cc;
 	/*
 	 * Default queue is expected to be a low-priority queue.
 	 * This way, long transfers on the default queue started
@@ -175,7 +168,6 @@ struct edma_soc_info {
 	/* Resource reservation for other cores */
 	struct edma_rsv_info	*rsv;
 
-	s8	(*queue_tc_mapping)[2];
 	s8	(*queue_priority_mapping)[2];
 	const s16	(*xbar_chans)[2];
 };