serial/efm32: add new driver

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Documentation/devicetree/bindings/tty/serial/efm32-uart.txt

+* Energymicro efm32 UART
+
+Required properties:
+- compatible : Should be "efm32,uart"
+- reg : Address and length of the register set
+- interrupts : Should contain uart interrupt
+
+Example:
+
+uart@0x4000c400 {
+	compatible = "efm32,uart";
+	reg = <0x4000c400 0x400>;
+	interrupts = <15>;
+};

drivers/tty/serial/Kconfig

@@ -1628,4 +1628,17 @@ config SERIAL_AR933X_NR_UARTS
 	  Set this to the number of serial ports you want the driver
 	  to support.
 
+config SERIAL_EFM32_UART
+	tristate "EFM32 UART/USART port."
+	depends on ARCH_EFM32
+	select SERIAL_CORE
+	help
+	  This driver support the USART and UART ports on
+	  Energy Micro's efm32 SoCs.
+
+config SERIAL_EFM32_UART_CONSOLE
+	bool "EFM32 UART/USART console support"
+	depends on SERIAL_EFM32_UART=y
+	select SERIAL_CORE_CONSOLE
+
 endmenu

drivers/tty/serial/Makefile

@@ -92,3 +92,4 @@ obj-$(CONFIG_SERIAL_LANTIQ)	+= lantiq.o
 obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
 obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
 obj-$(CONFIG_SERIAL_AR933X)   += ar933x_uart.o
+obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o

include/linux/platform_data/efm32-uart.h

+/*
+ *
+ *
+ */
+#ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__
+#define __LINUX_PLATFORM_DATA_EFM32_UART_H__
+
+#include <linux/types.h>
+
+/**
+ * struct efm32_uart_pdata
+ * @location: pinmux location for the I/O pins (to be written to the ROUTE
+ * 	register)
+ */
+struct efm32_uart_pdata {
+	u8 location;
+};
+#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ */

include/linux/serial_core.h

@@ -210,6 +210,8 @@
 /* Atheros AR933X SoC */
 #define PORT_AR933X	99
 
+/* Energy Micro efm32 SoC */
+#define PORT_EFMUART   100
 
 #ifdef __KERNEL__