Commit 3b862bad authored by Lorenzo Bianconi's avatar Lorenzo Bianconi Committed by Felix Fietkau

mt76: mt7615: introduce MCU_FW_PREFIX for fw mcu commands

Currently fw commands rely on negative cmds since they need different
mcu msg metadata. Extend this approach introducing MCU_FW_PREFIX.
This is a preliminary patch to support new mt7663e firmware commands
Signed-off-by: default avatarLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
parent 062c3699
......@@ -52,6 +52,7 @@ struct mt7615_fw_trailer {
void mt7615_mcu_fill_msg(struct mt7615_dev *dev, struct sk_buff *skb,
int cmd, int *wait_seq)
{
int mcu_cmd = cmd & MCU_CMD_MASK;
struct mt7615_mcu_txd *mcu_txd;
u8 seq, q_idx, pkt_fmt;
__le32 *txd;
......@@ -63,7 +64,7 @@ void mt7615_mcu_fill_msg(struct mt7615_dev *dev, struct sk_buff *skb,
mcu_txd = (struct mt7615_mcu_txd *)skb_push(skb, sizeof(*mcu_txd));
if (cmd != -MCU_CMD_FW_SCATTER) {
if (cmd != MCU_CMD_FW_SCATTER) {
q_idx = MT_TX_MCU_PORT_RX_Q0;
pkt_fmt = MT_TX_TYPE_CMD;
} else {
......@@ -87,9 +88,9 @@ void mt7615_mcu_fill_msg(struct mt7615_dev *dev, struct sk_buff *skb,
mcu_txd->pkt_type = MCU_PKT_ID;
mcu_txd->seq = seq;
if (cmd < 0) {
if (cmd & MCU_FW_PREFIX) {
mcu_txd->set_query = MCU_Q_NA;
mcu_txd->cid = -cmd;
mcu_txd->cid = mcu_cmd;
} else {
mcu_txd->cid = MCU_CMD_EXT_CID;
mcu_txd->set_query = MCU_Q_SET;
......@@ -127,7 +128,7 @@ mt7615_mcu_parse_response(struct mt7615_dev *dev, int cmd,
return -EAGAIN;
switch (cmd) {
case -MCU_CMD_PATCH_SEM_CONTROL:
case MCU_CMD_PATCH_SEM_CONTROL:
skb_pull(skb, sizeof(*rxd) - 4);
ret = *skb->data;
break;
......@@ -152,8 +153,8 @@ int mt7615_mcu_wait_response(struct mt7615_dev *dev, int cmd, int seq)
while (true) {
skb = mt76_mcu_get_response(&dev->mt76, expires);
if (!skb) {
dev_err(dev->mt76.dev, "Message %d (seq %d) timeout\n",
cmd, seq);
dev_err(dev->mt76.dev, "Message %ld (seq %d) timeout\n",
cmd & MCU_CMD_MASK, seq);
return -ETIMEDOUT;
}
......@@ -308,7 +309,7 @@ static int mt7615_mcu_init_download(struct mt7615_dev *dev, u32 addr,
.mode = cpu_to_le32(mode),
};
return __mt76_mcu_send_msg(&dev->mt76, -MCU_CMD_TARGET_ADDRESS_LEN_REQ,
return __mt76_mcu_send_msg(&dev->mt76, MCU_CMD_TARGET_ADDRESS_LEN_REQ,
&req, sizeof(req), true);
}
......@@ -1101,7 +1102,7 @@ static int mt7615_mcu_send_firmware(struct mt7615_dev *dev, const void *data,
cur_len = min_t(int, 4096 - sizeof(struct mt7615_mcu_txd),
len);
ret = __mt76_mcu_send_msg(&dev->mt76, -MCU_CMD_FW_SCATTER,
ret = __mt76_mcu_send_msg(&dev->mt76, MCU_CMD_FW_SCATTER,
data, cur_len, false);
if (ret)
break;
......@@ -1127,13 +1128,13 @@ static int mt7615_mcu_start_firmware(struct mt7615_dev *dev, u32 addr,
.addr = cpu_to_le32(addr),
};
return __mt76_mcu_send_msg(&dev->mt76, -MCU_CMD_FW_START_REQ,
return __mt76_mcu_send_msg(&dev->mt76, MCU_CMD_FW_START_REQ,
&req, sizeof(req), true);
}
static int mt7615_mcu_restart(struct mt76_dev *dev)
{
return __mt76_mcu_send_msg(dev, -MCU_CMD_RESTART_DL_REQ, NULL,
return __mt76_mcu_send_msg(dev, MCU_CMD_RESTART_DL_REQ, NULL,
0, true);
}
......@@ -1145,7 +1146,7 @@ static int mt7615_mcu_patch_sem_ctrl(struct mt7615_dev *dev, bool get)
.op = cpu_to_le32(get ? PATCH_SEM_GET : PATCH_SEM_RELEASE),
};
return __mt76_mcu_send_msg(&dev->mt76, -MCU_CMD_PATCH_SEM_CONTROL,
return __mt76_mcu_send_msg(&dev->mt76, MCU_CMD_PATCH_SEM_CONTROL,
&req, sizeof(req), true);
}
......@@ -1158,7 +1159,7 @@ static int mt7615_mcu_start_patch(struct mt7615_dev *dev)
.check_crc = 0,
};
return __mt76_mcu_send_msg(&dev->mt76, -MCU_CMD_PATCH_FINISH_REQ,
return __mt76_mcu_send_msg(&dev->mt76, MCU_CMD_PATCH_FINISH_REQ,
&req, sizeof(req), true);
}
......
......@@ -179,16 +179,19 @@ enum {
MCU_S2D_H2CN
};
#define MCU_FW_PREFIX BIT(31)
#define MCU_CMD_MASK ~MCU_FW_PREFIX
enum {
MCU_CMD_TARGET_ADDRESS_LEN_REQ = 0x01,
MCU_CMD_FW_START_REQ = 0x02,
MCU_CMD_TARGET_ADDRESS_LEN_REQ = MCU_FW_PREFIX | 0x01,
MCU_CMD_FW_START_REQ = MCU_FW_PREFIX | 0x02,
MCU_CMD_INIT_ACCESS_REG = 0x3,
MCU_CMD_PATCH_START_REQ = 0x05,
MCU_CMD_PATCH_FINISH_REQ = 0x07,
MCU_CMD_PATCH_SEM_CONTROL = 0x10,
MCU_CMD_PATCH_FINISH_REQ = MCU_FW_PREFIX | 0x07,
MCU_CMD_PATCH_SEM_CONTROL = MCU_FW_PREFIX | 0x10,
MCU_CMD_EXT_CID = 0xED,
MCU_CMD_FW_SCATTER = 0xEE,
MCU_CMD_RESTART_DL_REQ = 0xEF,
MCU_CMD_FW_SCATTER = MCU_FW_PREFIX | 0xEE,
MCU_CMD_RESTART_DL_REQ = MCU_FW_PREFIX | 0xEF,
};
enum {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment