Commit 3b86b202 authored by Greg KH's avatar Greg KH

[PATCH] USB: add a driver for the AirPrime CDMA Wireless PC card.

Easier than trying to use the generic usb-serial driver.
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 56c1e26d
...@@ -53,6 +53,15 @@ config USB_SERIAL_GENERIC ...@@ -53,6 +53,15 @@ config USB_SERIAL_GENERIC
support" be compiled as a module for this driver to be used support" be compiled as a module for this driver to be used
properly. properly.
config USB_SERIAL_AIRPRIME
tristate "USB AirPrime CDMA Wireless Driver"
depends on USB_SERIAL
help
Say Y here if you want to use a AirPrime CDMA Wireless PC card.
To compile this driver as a module, choose M here: the
module will be called airprime.
config USB_SERIAL_BELKIN config USB_SERIAL_BELKIN
tristate "USB Belkin and Peracom Single Port Serial Driver" tristate "USB Belkin and Peracom Single Port Serial Driver"
depends on USB_SERIAL depends on USB_SERIAL
......
...@@ -11,6 +11,7 @@ usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o ...@@ -11,6 +11,7 @@ usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o
usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y) usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y)
obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o
obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o
obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o
obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o
......
/*
* AirPrime CDMA Wireless Serial USB driver
*
* Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usb-serial.h"
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0xf3d, 0x0112) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_driver airprime_driver = {
.owner = THIS_MODULE,
.name = "airprime",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
};
static struct usb_serial_device_type airprime_device = {
.owner = THIS_MODULE,
.name = "airprime",
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
};
static int __init airprime_init(void)
{
int retval;
retval = usb_serial_register(&airprime_device);
if (retval)
return retval;
retval = usb_register(&airprime_driver);
if (retval)
usb_serial_deregister(&airprime_device);
return retval;
}
static void __exit airprime_exit(void)
{
usb_deregister(&airprime_driver);
usb_serial_deregister(&airprime_device);
}
module_init(airprime_init);
module_exit(airprime_exit);
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment