Commit 3c3d1672 authored by Jacopo Mondi's avatar Jacopo Mondi Committed by Simon Horman

arm64: dts: renesas: eagle: Enable HDMI output

Enable HDMI output on Renesas R-Car V3M Eagle board.

The HDMI output is enabled connecting the DU LVDS output to the
transparent LVDS converter THC63LVD1024, and successively routing its
RGB output to the ADV7511W HDMI encoder.
Signed-off-by: default avatarNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: default avatarJacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
[for THC63LVD1024: ]
Reviewed-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 3cd0bd7d
...@@ -31,6 +31,51 @@ memory@48000000 { ...@@ -31,6 +31,51 @@ memory@48000000 {
/* first 128MB is reserved for secure area. */ /* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>; reg = <0x0 0x48000000 0x0 0x38000000>;
}; };
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_out: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
};
d3p3: regulator-fixed {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <&d3p3>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
thc63lvd1024_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
port@2 {
reg = <2>;
thc63lvd1024_out: endpoint {
remote-endpoint = <&adv7511_in>;
};
};
};
};
}; };
&avb { &avb {
...@@ -68,6 +113,38 @@ io_expander: gpio@20 { ...@@ -68,6 +113,38 @@ io_expander: gpio@20 {
gpio-controller; gpio-controller;
#gpio-cells = <2>; #gpio-cells = <2>;
}; };
hdmi@39 {
compatible = "adi,adv7511w";
reg = <0x39>;
interrupt-parent = <&gpio1>;
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7511_in: endpoint {
remote-endpoint = <&thc63lvd1024_out>;
};
};
port@1 {
reg = <1>;
adv7511_out: endpoint {
remote-endpoint = <&hdmi_con_out>;
};
};
};
};
}; };
&pfc { &pfc {
...@@ -93,3 +170,19 @@ &scif0 { ...@@ -93,3 +170,19 @@ &scif0 {
status = "okay"; status = "okay";
}; };
&du {
status = "okay";
};
&lvds0 {
status = "okay";
ports {
port@1 {
lvds0_out: endpoint {
remote-endpoint = <&thc63lvd1024_in>;
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment