Merge kroah.com:/home/greg/linux/BK/bleed-2.5

into kroah.com:/home/greg/linux/BK/i2c-new_drivers-2.6

Documentation/i2c/porting-clients

+Revision 3, 2003-10-04
+Jean Delvare <khali@linux-fr.org>
+Greg KH <greg@kroah.com>
+
+This is a guide on how to convert I2C chip drivers from Linux 2.4 to
+Linux 2.6. I have been using existing drivers (lm75, lm78) as examples.
+Then I converted a driver myself (lm83) and updated this document.
+
+There are two sets of points below. The first set concerns technical
+changes. The second set concerns coding policy. Both are mandatory.
+
+Although reading this guide will help you porting drivers, I suggest
+you keep an eye on an already ported driver while porting your own
+driver. This will help you a lot understanding what this guide
+exactly means. Choose the chip driver that is the more similar to
+yours for best results.
+
+Technical changes:
+
+* [Includes] Get rid of "version.h". Replace <linux/i2c-proc.h> with
+  <linux/i2c-sensor.h>. Includes typically look like that:
+  #include <linux/module.h>
+  #include <linux/init.h>
+  #include <linux/slab.h>
+  #include <linux/i2c.h>
+  #include <linux/i2c-sensor.h>
+  #include <linux/i2c-vid.h>     /* if you need VRM support */
+  #include <asm/io.h>            /* if you have I/O operations */
+  Some extra headers may be required for a given driver.
+
+* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, SENSORS_ISA_END
+  becomes I2C_CLIENT_ISA_END.
+
+* [Client data] Get rid of sysctl_id. Try using standard names for
+  register values (for example, temp_os becomes temp_max). You're
+  still relatively free here, but you *have* to follow the standard
+  names for sysfs files (see the Sysctl section below).
+
+* [Function prototypes] The detect functions loses its flags
+  parameter. Sysctl (e.g. lm75_temp) and miscellaneous (e.g.
+  swap_bytes) functions are off the list of prototypes. This
+  usually leaves five prototypes:
+  static int lm75_attach_adapter(struct i2c_adapter *adapter);
+  static int lm75_detect(struct i2c_adapter *adapter, int address,
+      int kind);
+  static void lm75_init_client(struct i2c_client *client);
+  static int lm75_detach_client(struct i2c_client *client);
+  static void lm75_update_client(struct i2c_client *client);
+
+* [Sysctl] All sysctl stuff is of course gone (defines, ctl_table
+  and functions). Instead, right after the static id definition
+  line, you have to define show and set functions for each sysfs
+  file. Only define set for writable values. Take a look at an
+  existing 2.6 driver for details (lm78 for example). Don't forget
+  to define the attributes for each file (this is that step that
+  links callback functions). Use the file names specified in
+  Documentation/i2c/sysfs-interface for the individual files. Also
+  convert the units these files read and write to the specified ones.
+  If you need to add a new type of file, please discuss it on the
+  sensors mailing list <sensors@stimpy.netroedge.com> by providing a
+  patch to the Documentation/i2c/sysfs-interface file.
+
+* [Attach] For I2C drivers, the attach function should make sure
+  that the adapter's class has I2C_ADAP_CLASS_SMBUS, using the
+  following construct:
+  if (!(adapter->class & I2C_ADAP_CLASS_SMBUS))
+          return 0;
+  ISA-only drivers of course don't need this.
+
+* [Detect] As mentioned earlier, the flags parameter is gone.
+  The type_name and client_name strings are replaced by a single
+  name string, which will be filled with a lowercase, short string
+  (typically the driver name, e.g. "lm75"). The errorN labels are
+  reduced to the number needed. If that number is 2 (i2c-only
+  drivers), it is advised that the labels are named exit and
+  exit_free. For i2c+isa drivers, labels should be named ERROR0,
+  ERROR1 and ERROR2. Don't forget to properly set err before
+  jumping to error labels. By the way, labels should be
+  left-aligned.
+  Use memset to fill the client and data area with 0x00.
+  Use i2c_set_clientdata to set the client data (as opposed to
+  a direct access to client->data).
+  Use strlcpy instead of strcpy to copy the client name.
+  Replace the sysctl directory registration by calls to
+  device_create_file. Move the driver initialization before any
+  sysfs file creation.
+
+* [Detach] Get rid of data, remove the call to
+  i2c_deregister_entry.
+
+* [Update] Don't access client->data directly, use
+  i2c_get_clientdata(client) instead.
+
+* [Interface] Init function should not print anything. Make sure
+  there is a MODULE_LICENSE() line.
+
+Coding policy:
+
+* [Copyright] Use (C), not (c), for copyright.
+
+* [Debug/log] Get rid of #ifdef DEBUG/#endif constructs whenever you
+  can. Calls to printk/pr_debug for debugging purposes are replaced
+  by calls to dev_dbg. Here is an example on how to call it (taken
+  from lm75_detect):
+  dev_dbg(&adapter->dev,
+          "lm75_detect called for an ISA bus adapter?!?\n");
+  Replace other printk calls with the dev_info, dev_err or dev_warn
+  function, as appropriate.
+
+* [Constants] Constants defines (registers, conversions, initial
+  values) should be aligned. This greatly improves readability.
+  Same goes for variables declarations. Alignments are achieved by the
+  means of tabs, not spaces. Remember that tabs are set to 8 in the
+  Linux kernel code.
+
+* [Structure definition] The name field should be standardized. All
+  lowercase and as simple as the driver name itself (e.g. "lm75").
+
+* [Layout] Avoid extra empty lines between comments and what they
+  comment. Respect the coding style (see Documentation/CodingStyle),
+  in particular when it comes to placing curly braces.

Documentation/i2c/sysfs-interface

@@ -68,9 +68,7 @@ curr_max[1-n]	Current max value
 		Fixed point XXXXX, divide by 1000 to get Amps.
 		Read/Write.
 
-curr_min[1-n]	Current min or hysteresis value.
-		Preferably a hysteresis value, reported as a absolute
-		current, NOT a delta from the max value.
+curr_min[1-n]	Current min value.
 		Fixed point XXXXX, divide by 1000 to get Amps.
 		Read/Write.
 
@@ -144,25 +142,38 @@ sensor[1-3]	Sensor type selection.
 		Integers 1,2,3, or thermistor Beta value (3435)
 		Read/Write.
 
-temp_max[1-3]	Temperature max value.
+temp_max[1-4]	Temperature max value.
 		Fixed point value in form XXXXX and should be divided by
 		1000 to get degrees Celsius.
 		Read/Write value.
 
-temp_min[1-3]	Temperature min or hysteresis value.
+temp_min[1-3]	Temperature min value.
 		Fixed point value in form XXXXX and should be divided by
-		1000 to get degrees Celsius.  This is preferably a
-		hysteresis value, reported as a absolute temperature,
-		NOT a delta from the max value.
+		1000 to get degrees Celsius.
 		Read/Write value.
 
-temp_input[1-3] Temperature input value.
+temp_hyst[1-3]	Temperature hysteresis value.
+		Fixed point value in form XXXXX and should be divided by
+		1000 to get degrees Celsius.  Must be reported as an
+		absolute temperature, NOT a delta from the max value.
+		Read/Write value.
+
+temp_input[1-4] Temperature input value.
+		Fixed point value in form XXXXX and should be divided by
+		1000 to get degrees Celsius.
 		Read only value.
 
+temp_crit	Temperature critical value, typically greater than all
+		temp_max values.
+		Fixed point value in form XXXXX and should be divided by
+		1000 to get degrees Celsius.
+		Common to all temperature channels.
+		Read/Write value.
+
 		If there are multiple temperature sensors, temp_*1 is
 		generally the sensor inside the chip itself, generally
-		reported as "motherboard temperature".  temp_*2 and
-		temp_*3 are generally sensors external to the chip
+		reported as "motherboard temperature".  temp_*2 to
+		temp_*4 are generally sensors external to the chip
 		itself, for example the thermal diode inside the CPU or
 		a thermistor nearby.
 

Documentation/i2c/writing-clients

@@ -24,16 +24,14 @@ all clients from it. Remember, a driver structure contains general access
 routines, a client structure specific information like the actual I2C
 address.
 
-  struct i2c_driver foo_driver
-  {  
-    /* name           */  "Foo version 2.3 and later driver",
-    /* id             */  I2C_DRIVERID_FOO,
-    /* flags          */  I2C_DF_NOTIFY,
-    /* attach_adapter */  &foo_attach_adapter,
-    /* detach_client  */  &foo_detach_client,
-    /* command        */  &foo_command,   /* May be NULL */
-    /* inc_use        */  &foo_inc_use,   /* May be NULL */
-    /* dec_use        */  &foo_dec_use    /* May be NULL */
+  static struct i2c_driver foo_driver = {
+    .owner          = THIS_MODULE,
+    .name           = "Foo version 2.3 driver",
+    .id             = I2C_DRIVERID_FOO, /* usually from i2c-id.h */
+    .flags          = I2C_DF_NOTIFY,
+    .attach_adapter = &foo_attach_adapter,
+    .detach_client  = &foo_detach_client,
+    .command        = &foo_command /* may be NULL */
   }
  
 The name can be chosen freely, and may be upto 40 characters long. Please
@@ -50,43 +48,8 @@ This is almost always what you want.
 All other fields are for call-back functions which will be explained 
 below.
 
-
-Module usage count
-==================
-
-If your driver can also be compiled as a module, there are moments at 
-which the module can not be removed from memory. For example, when you
-are doing a lengthy transaction, or when you create a /proc directory,
-and some process has entered that directory (this last case is the
-main reason why these call-backs were introduced).
-
-To increase or decrease the module usage count, you can use the
-MOD_{INC,DEC}_USE_COUNT macros. They must be called from the module
-which needs to get its usage count changed; that is why each driver
-module has to implement its own callback.
-
-  void foo_inc_use (struct i2c_client *client)
-  {
-  #ifdef MODULE
-    MOD_INC_USE_COUNT;
-  #endif
-  }
-
-  void foo_dec_use (struct i2c_client *client)
-  {
-  #ifdef MODULE
-    MOD_DEC_USE_COUNT;
-  #endif
-  }
-
-Do not call these call-back functions directly; instead, use one of the
-following functions defined in i2c.h:
-  void i2c_inc_use_client(struct i2c_client *);
-  void i2c_dec_use_client(struct i2c_client *);
-
-You should *not* increase the module count just because a device is
-detected and a client created. This would make it impossible to remove
-an adapter driver! 
+There use to be two additional fields in this structure, inc_use et dec_use,
+for module usage count, but these fields were obsoleted and removed.
 
 
 Extra client data

drivers/i2c/algos/i2c-algo-bit.c

@@ -18,10 +18,8 @@
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
 /* ------------------------------------------------------------------------- */
 
-/* With some changes from Kysti Mlkki <kmalkki@cc.hut.fi> and even
-   Frodo Looijaard <frodol@dds.nl> */
-
-/* $Id: i2c-algo-bit.c,v 1.44 2003/01/21 08:08:16 kmalkki Exp $ */
+/* With some changes from Frodo Looijaard <frodol@dds.nl>, Kysti Mlkki
+   <kmalkki@cc.hut.fi> and Jean Delvare <khali@linux-fr.org> */
 
 /* #define DEBUG 1 */
 
@@ -87,8 +85,10 @@ static inline int sclhi(struct i2c_algo_bit_data *adap)
 	setscl(adap,1);
 
 	/* Not all adapters have scl sense line... */
-	if (adap->getscl == NULL )
+	if (adap->getscl == NULL ) {
+		udelay(adap->udelay);
 		return 0;
+	}
 
 	start=jiffies;
 	while (! getscl(adap) ) {	
@@ -222,68 +222,72 @@ static int i2c_inb(struct i2c_adapter *i2c_adap)
  */
 static int test_bus(struct i2c_algo_bit_data *adap, char* name) {
 	int scl,sda;
+
+	if (adap->getscl==NULL)
+		printk(KERN_INFO "i2c-algo-bit.o: Testing SDA only, "
+			"SCL is not readable.\n");
+
 	sda=getsda(adap);
-	if (adap->getscl==NULL) {
-		printk(KERN_WARNING "i2c-algo-bit.o: Warning: Adapter can't read from clock line - skipping test.\n");
-		return 0;		
-	}
-	scl=getscl(adap);
-	printk(KERN_INFO "i2c-algo-bit.o: Adapter: %s scl: %d  sda: %d -- testing...\n",
-	       name,getscl(adap),getsda(adap));
+	scl=(adap->getscl==NULL?1:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (0) scl=%d, sda=%d\n",scl,sda);
 	if (!scl || !sda ) {
-		printk(KERN_INFO " i2c-algo-bit.o: %s seems to be busy.\n",name);
+		printk(KERN_WARNING "i2c-algo-bit.o: %s seems to be busy.\n", name);
 		goto bailout;
 	}
+
 	sdalo(adap);
-	printk(KERN_DEBUG "i2c-algo-bit.o:1 scl: %d  sda: %d \n",getscl(adap),
-	       getsda(adap));
-	if ( 0 != getsda(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SDA stuck high!\n",name);
-		sdahi(adap);
+	sda=getsda(adap);
+	scl=(adap->getscl==NULL?1:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (1) scl=%d, sda=%d\n",scl,sda);
+	if ( 0 != sda ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck high!\n");
 		goto bailout;
 	}
-	if ( 0 == getscl(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SCL unexpected low while pulling SDA low!\n",
-			name);
+	if ( 0 == scl ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "
+			"while pulling SDA low!\n");
 		goto bailout;
 	}		
+
 	sdahi(adap);
-	printk(KERN_DEBUG "i2c-algo-bit.o:2 scl: %d  sda: %d \n",getscl(adap),
-	       getsda(adap));
-	if ( 0 == getsda(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SDA stuck low!\n",name);
-		sdahi(adap);
+	sda=getsda(adap);
+	scl=(adap->getscl==NULL?1:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (2) scl=%d, sda=%d\n",scl,sda);
+	if ( 0 == sda ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck low!\n");
 		goto bailout;
 	}
-	if ( 0 == getscl(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SCL unexpected low while SDA high!\n",
-		       name);
-	goto bailout;
+	if ( 0 == scl ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "
+			"while pulling SDA high!\n");
+		goto bailout;
 	}
+
 	scllo(adap);
-	printk(KERN_DEBUG "i2c-algo-bit.o:3 scl: %d  sda: %d \n",getscl(adap),
-	       getsda(adap));
-	if ( 0 != getscl(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SCL stuck high!\n",name);
-		sclhi(adap);
+	sda=getsda(adap);
+	scl=(adap->getscl==NULL?0:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (3) scl=%d, sda=%d\n",scl,sda);
+	if ( 0 != scl ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck high!\n");
 		goto bailout;
 	}
-	if ( 0 == getsda(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SDA unexpected low while pulling SCL low!\n",
-			name);
+	if ( 0 == sda ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "
+			"while pulling SCL low!\n");
 		goto bailout;
 	}
+	
 	sclhi(adap);
-	printk(KERN_DEBUG "i2c-algo-bit.o:4 scl: %d  sda: %d \n",getscl(adap),
-	       getsda(adap));
-	if ( 0 == getscl(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SCL stuck low!\n",name);
-		sclhi(adap);
+	sda=getsda(adap);
+	scl=(adap->getscl==NULL?1:getscl(adap));
+	printk(KERN_DEBUG "i2c-algo-bit.o: (4) scl=%d, sda=%d\n",scl,sda);
+	if ( 0 == scl ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck low!\n");
 		goto bailout;
 	}
-	if ( 0 == getsda(adap) ) {
-		printk(KERN_WARNING "i2c-algo-bit.o: %s SDA unexpected low while SCL high!\n",
-			name);
+	if ( 0 == sda ) {
+		printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "
+			"while pulling SCL high!\n");
 		goto bailout;
 	}
 	printk(KERN_INFO "i2c-algo-bit.o: %s passed test.\n",name);

drivers/i2c/busses/Kconfig

@@ -161,11 +161,12 @@ config I2C_PIIX4
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
-	  versions of the chipset is supported:
+	  versions of the chipset are supported:
 	    Intel PIIX4
 	    Intel 440MX
 	    Serverworks OSB4
 	    Serverworks CSB5
+	    Serverworks CSB6
 	    SMSC Victory66
 
 	  This driver can also be built as a module.  If so, the module
@@ -309,6 +310,7 @@ config I2C_VIAPRO
 	  8233
 	  8233A
 	  8235
+	  8237
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-viapro.

drivers/i2c/busses/i2c-piix4.c

@@ -22,7 +22,7 @@
 /*
    Supports:
 	Intel PIIX4, 440MX
-	Serverworks OSB4, CSB5
+	Serverworks OSB4, CSB5, CSB6
 	SMSC Victory66
 
    Note: we assume there can only be one device, with one SMBus interface.
@@ -422,6 +422,13 @@ static struct pci_device_id piix4_ids[] = {
 		.subdevice =	PCI_ANY_ID,
 		.driver_data =	0,
 	},
+	{
+		.vendor =	PCI_VENDOR_ID_SERVERWORKS,
+		.device =	PCI_DEVICE_ID_SERVERWORKS_CSB6,
+		.subvendor =	PCI_ANY_ID,
+		.subdevice =	PCI_ANY_ID,
+		.driver_data =	0,
+	},
 	{
 		.vendor =	PCI_VENDOR_ID_INTEL,
 		.device =	PCI_DEVICE_ID_INTEL_82443MX_3,

drivers/i2c/busses/i2c-savage4.c

 /*
     i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware
               monitoring
-    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>,
-    Philip Edelbrock <phil@netroedge.com>,
-    Ralph Metzler <rjkm@thp.uni-koeln.de>, and
+    Copyright (C) 1998-2003  The LM Sensors Team
+    Alexander Wold <awold@bigfoot.com>
     Mark D. Studebaker <mdsxyz123@yahoo.com>
     
-    Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
-    Simon Vogl
+    Based on i2c-voodoo3.c.
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -195,9 +193,7 @@ static void __exit i2c_savage4_exit(void)
 	pci_unregister_driver(&savage4_driver);
 }
 
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
-		"Philip Edelbrock <phil@netroedge.com>, "
-		"Ralph Metzler <rjkm@thp.uni-koeln.de>, "
+MODULE_AUTHOR("Alexander Wold <awold@bigfoot.com> "
 		"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
 MODULE_DESCRIPTION("Savage4 I2C/SMBus driver");
 MODULE_LICENSE("GPL");

drivers/i2c/busses/i2c-viapro.c

@@ -29,6 +29,7 @@
 	8233
 	8233A (0x3147 and 0x3177)
 	8235
+	8237
    Note: we assume there can only be one device, with one SMBus interface.
 */
 
@@ -434,6 +435,13 @@ static struct pci_device_id vt596_ids[] = {
 		.subdevice	= PCI_ANY_ID,
 		.driver_data	= SMBBA3
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_VIA,
+		.device 	= PCI_DEVICE_ID_VIA_8237,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= SMBBA3
+	},
 	{
 		.vendor		= PCI_VENDOR_ID_VIA,
 		.device 	= PCI_DEVICE_ID_VIA_8231_4,

drivers/i2c/chips/Kconfig

@@ -68,6 +68,17 @@ config SENSORS_LM78
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm78.
 
+config SENSORS_LM83
+	tristate "National Semiconductor LM83"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for National Semiconductor
+	  LM83 sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm83.
+
 config SENSORS_LM85
 	tristate "National Semiconductor LM85 and compatibles"
 	depends on I2C && EXPERIMENTAL

drivers/i2c/chips/Makefile

@@ -10,5 +10,6 @@ obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
 obj-$(CONFIG_SENSORS_LM75)	+= lm75.o
 obj-$(CONFIG_SENSORS_LM78)	+= lm78.o
+obj-$(CONFIG_SENSORS_LM83)	+= lm83.o
 obj-$(CONFIG_SENSORS_LM85)	+= lm85.o
 obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o

drivers/i2c/chips/it87.c

@@ -343,7 +343,6 @@ static ssize_t show_temp(struct device *dev, char *buf, int nr)
 	it87_update_client(client);
 	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])*100 );
 }
-/* more like overshoot temperature */
 static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -351,7 +350,6 @@ static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
 	it87_update_client(client);
 	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])*100);
 }
-/* more like hysteresis temperature */
 static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -414,7 +412,6 @@ show_temp_offset(1);
 show_temp_offset(2);
 show_temp_offset(3);
 
-/* more like overshoot temperature */
 static ssize_t show_sensor(struct device *dev, char *buf, int nr)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -563,15 +560,15 @@ show_fan_offset(1);
 show_fan_offset(2);
 show_fan_offset(3);
 
-/* Alarm */
-static ssize_t show_alarm(struct device *dev, char *buf)
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, char *buf)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct it87_data *data = i2c_get_clientdata(client);
 	it87_update_client(client);
 	return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms));
 }
-static DEVICE_ATTR(alarm, S_IRUGO | S_IWUSR, show_alarm, NULL);
+static DEVICE_ATTR(alarms, S_IRUGO | S_IWUSR, show_alarms, NULL);
 
 /* This function is called when:
      * it87_driver is inserted (when this module is loaded), for each
@@ -751,7 +748,7 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind)
 	device_create_file(&new_client->dev, &dev_attr_fan_div1);
 	device_create_file(&new_client->dev, &dev_attr_fan_div2);
 	device_create_file(&new_client->dev, &dev_attr_fan_div3);
-	device_create_file(&new_client->dev, &dev_attr_alarm);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
 
 	return 0;
 

drivers/i2c/chips/lm75.c

@@ -116,7 +116,7 @@ set(temp_max, LM75_REG_TEMP_OS);
 set(temp_hyst, LM75_REG_TEMP_HYST);
 
 static DEVICE_ATTR(temp_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
+static DEVICE_ATTR(temp_hyst, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
 static DEVICE_ATTR(temp_input, S_IRUGO, show_temp_input, NULL);
 
 static int lm75_attach_adapter(struct i2c_adapter *adapter)
@@ -209,7 +209,7 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
 	
 	/* Register sysfs hooks */
 	device_create_file(&new_client->dev, &dev_attr_temp_max);
-	device_create_file(&new_client->dev, &dev_attr_temp_min);
+	device_create_file(&new_client->dev, &dev_attr_temp_hyst);
 	device_create_file(&new_client->dev, &dev_attr_temp_input);
 
 	return 0;

drivers/i2c/chips/lm78.c

@@ -367,7 +367,7 @@ static ssize_t set_temp_hyst(struct device *dev, const char *buf, size_t count)
 static DEVICE_ATTR(temp_input, S_IRUGO, show_temp, NULL)
 static DEVICE_ATTR(temp_max, S_IRUGO | S_IWUSR,
 		show_temp_over, set_temp_over)
-static DEVICE_ATTR(temp_min, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR(temp_hyst, S_IRUGO | S_IWUSR,
 		show_temp_hyst, set_temp_hyst)
 
 /* 3 Fans */
@@ -674,8 +674,8 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
 	device_create_file(&new_client->dev, &dev_attr_in_min6);
 	device_create_file(&new_client->dev, &dev_attr_in_max6);
 	device_create_file(&new_client->dev, &dev_attr_temp_input);
-	device_create_file(&new_client->dev, &dev_attr_temp_min);
 	device_create_file(&new_client->dev, &dev_attr_temp_max);
+	device_create_file(&new_client->dev, &dev_attr_temp_hyst);
 	device_create_file(&new_client->dev, &dev_attr_fan_input1);
 	device_create_file(&new_client->dev, &dev_attr_fan_min1);
 	device_create_file(&new_client->dev, &dev_attr_fan_div1);

drivers/i2c/chips/via686a.c

@@ -496,21 +496,19 @@ static ssize_t show_temp(struct device *dev, char *buf, int nr) {
 	via686a_update_client(client);
 	return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr])*100 );
 }
-/* more like overshoot temperature */
-static ssize_t show_temp_max(struct device *dev, char *buf, int nr) {
+static ssize_t show_temp_over(struct device *dev, char *buf, int nr) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
 	via686a_update_client(client);
 	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr])*100);
 }
-/* more like hysteresis temperature */
-static ssize_t show_temp_min(struct device *dev, char *buf, int nr) {
+static ssize_t show_temp_hyst(struct device *dev, char *buf, int nr) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
 	via686a_update_client(client);
 	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr])*100);
 }
-static ssize_t set_temp_max(struct device *dev, const char *buf, 
+static ssize_t set_temp_over(struct device *dev, const char *buf, 
 		size_t count, int nr) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
@@ -519,7 +517,7 @@ static ssize_t set_temp_max(struct device *dev, const char *buf,
 	via686a_write_value(client, VIA686A_REG_TEMP_OVER(nr), data->temp_over[nr]);
 	return count;
 }
-static ssize_t set_temp_min(struct device *dev, const char *buf, 
+static ssize_t set_temp_hyst(struct device *dev, const char *buf, 
 		size_t count, int nr) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
@@ -534,30 +532,30 @@ static ssize_t show_temp_##offset (struct device *dev, char *buf)	\
 	return show_temp(dev, buf, 0x##offset - 1);			\
 }									\
 static ssize_t								\
-show_temp_##offset##_max (struct device *dev, char *buf)		\
+show_temp_##offset##_over (struct device *dev, char *buf)		\
 {									\
-	return show_temp_max(dev, buf, 0x##offset - 1);			\
+	return show_temp_over(dev, buf, 0x##offset - 1);			\
 }									\
 static ssize_t								\
-show_temp_##offset##_min (struct device *dev, char *buf)		\
+show_temp_##offset##_hyst (struct device *dev, char *buf)		\
 {									\
-	return show_temp_min(dev, buf, 0x##offset - 1);			\
+	return show_temp_hyst(dev, buf, 0x##offset - 1);			\
 }									\
-static ssize_t set_temp_##offset##_max (struct device *dev, 		\
+static ssize_t set_temp_##offset##_over (struct device *dev, 		\
 		const char *buf, size_t count) 				\
 {									\
-	return set_temp_max(dev, buf, count, 0x##offset - 1);		\
+	return set_temp_over(dev, buf, count, 0x##offset - 1);		\
 }									\
-static ssize_t set_temp_##offset##_min (struct device *dev, 		\
+static ssize_t set_temp_##offset##_hyst (struct device *dev, 		\
 		const char *buf, size_t count) 				\
 {									\
-	return set_temp_min(dev, buf, count, 0x##offset - 1);		\
+	return set_temp_hyst(dev, buf, count, 0x##offset - 1);		\
 }									\
 static DEVICE_ATTR(temp_input##offset, S_IRUGO, show_temp_##offset, NULL) \
 static DEVICE_ATTR(temp_max##offset, S_IRUGO | S_IWUSR, 		\
-		show_temp_##offset##_max, set_temp_##offset##_max) 	\
-static DEVICE_ATTR(temp_min##offset, S_IRUGO | S_IWUSR, 		\
-		show_temp_##offset##_min, set_temp_##offset##_min)	
+		show_temp_##offset##_over, set_temp_##offset##_over) 	\
+static DEVICE_ATTR(temp_hyst##offset, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_hyst, set_temp_##offset##_hyst)	
 
 show_temp_offset(1);
 show_temp_offset(2);
@@ -637,14 +635,14 @@ static DEVICE_ATTR(fan_div##offset, S_IRUGO | S_IWUSR, 			\
 show_fan_offset(1);
 show_fan_offset(2);
 
-/* Alarm */
-static ssize_t show_alarm(struct device *dev, char *buf) {
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, char *buf) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
 	via686a_update_client(client);
 	return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms));
 }
-static DEVICE_ATTR(alarm, S_IRUGO | S_IWUSR, show_alarm, NULL);
+static DEVICE_ATTR(alarms, S_IRUGO | S_IWUSR, show_alarms, NULL);
 
 /* The driver. I choose to use type i2c_driver, as at is identical to both
    smbus_driver and isa_driver, and clients could be of either kind */
@@ -760,16 +758,16 @@ static int via686a_detect(struct i2c_adapter *adapter, int address, int kind)
 	device_create_file(&new_client->dev, &dev_attr_temp_max1);
 	device_create_file(&new_client->dev, &dev_attr_temp_max2);
 	device_create_file(&new_client->dev, &dev_attr_temp_max3);
-	device_create_file(&new_client->dev, &dev_attr_temp_min1);
-	device_create_file(&new_client->dev, &dev_attr_temp_min2);
-	device_create_file(&new_client->dev, &dev_attr_temp_min3);
+	device_create_file(&new_client->dev, &dev_attr_temp_hyst1);
+	device_create_file(&new_client->dev, &dev_attr_temp_hyst2);
+	device_create_file(&new_client->dev, &dev_attr_temp_hyst3);
 	device_create_file(&new_client->dev, &dev_attr_fan_input1);
 	device_create_file(&new_client->dev, &dev_attr_fan_input2);
 	device_create_file(&new_client->dev, &dev_attr_fan_min1);
 	device_create_file(&new_client->dev, &dev_attr_fan_min2);
 	device_create_file(&new_client->dev, &dev_attr_fan_div1);
 	device_create_file(&new_client->dev, &dev_attr_fan_div2);
-	device_create_file(&new_client->dev, &dev_attr_alarm);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
 
 	return 0;
 

drivers/i2c/chips/w83781d.c

@@ -309,11 +309,11 @@ struct w83781d_data {
 	u8 fan[3];		/* Register value */
 	u8 fan_min[3];		/* Register value */
 	u8 temp;
-	u8 temp_min;		/* Register value */
 	u8 temp_max;		/* Register value */
+	u8 temp_hyst;		/* Register value */
 	u16 temp_add[2];	/* Register value */
 	u16 temp_max_add[2];	/* Register value */
-	u16 temp_min_add[2];	/* Register value */
+	u16 temp_hyst_add[2];	/* Register value */
 	u8 fan_div[3];		/* Register encoding, shifted right */
 	u8 vid;			/* Register encoding, combined */
 	u32 alarms;		/* Register encoding, combined */
@@ -510,8 +510,8 @@ static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
 	} \
 }
 show_temp_reg(temp);
-show_temp_reg(temp_min);
 show_temp_reg(temp_max);
+show_temp_reg(temp_hyst);
 
 #define store_temp_reg(REG, reg) \
 static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
@@ -538,8 +538,8 @@ static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t cou
 	 \
 	return count; \
 }
-store_temp_reg(OVER, min);
-store_temp_reg(HYST, max);
+store_temp_reg(OVER, max);
+store_temp_reg(HYST, hyst);
 
 #define sysfs_temp_offset(offset) \
 static ssize_t \
@@ -562,8 +562,8 @@ static DEVICE_ATTR(temp_##reg##offset, S_IRUGO| S_IWUSR, show_regs_temp_##reg##o
 
 #define sysfs_temp_offsets(offset) \
 sysfs_temp_offset(offset); \
-sysfs_temp_reg_offset(min, offset); \
-sysfs_temp_reg_offset(max, offset);
+sysfs_temp_reg_offset(max, offset); \
+sysfs_temp_reg_offset(hyst, offset);
 
 sysfs_temp_offsets(1);
 sysfs_temp_offsets(2);
@@ -573,7 +573,7 @@ sysfs_temp_offsets(3);
 do { \
 device_create_file(&client->dev, &dev_attr_temp_input##offset); \
 device_create_file(&client->dev, &dev_attr_temp_max##offset); \
-device_create_file(&client->dev, &dev_attr_temp_min##offset); \
+device_create_file(&client->dev, &dev_attr_temp_hyst##offset); \
 } while (0)
 
 static ssize_t
@@ -1865,15 +1865,15 @@ w83781d_update_client(struct i2c_client *client)
 		}
 
 		data->temp = w83781d_read_value(client, W83781D_REG_TEMP(1));
-		data->temp_min =
-		    w83781d_read_value(client, W83781D_REG_TEMP_OVER(1));
 		data->temp_max =
+		    w83781d_read_value(client, W83781D_REG_TEMP_OVER(1));
+		data->temp_hyst =
 		    w83781d_read_value(client, W83781D_REG_TEMP_HYST(1));
 		data->temp_add[0] =
 		    w83781d_read_value(client, W83781D_REG_TEMP(2));
 		data->temp_max_add[0] =
 		    w83781d_read_value(client, W83781D_REG_TEMP_OVER(2));
-		data->temp_min_add[0] =
+		data->temp_hyst_add[0] =
 		    w83781d_read_value(client, W83781D_REG_TEMP_HYST(2));
 		if (data->type != w83783s && data->type != w83697hf) {
 			data->temp_add[1] =
@@ -1881,7 +1881,7 @@ w83781d_update_client(struct i2c_client *client)
 			data->temp_max_add[1] =
 			    w83781d_read_value(client,
 					       W83781D_REG_TEMP_OVER(3));
-			data->temp_min_add[1] =
+			data->temp_hyst_add[1] =
 			    w83781d_read_value(client,
 					       W83781D_REG_TEMP_HYST(3));
 		}

include/linux/i2c-id.h

@@ -153,6 +153,7 @@
 #define I2C_DRIVERID_FS451 1037
 #define I2C_DRIVERID_W83627HF 1038
 #define I2C_DRIVERID_LM85 1039
+#define I2C_DRIVERID_LM83 1040
 
 /*
  * ---- Adapter types ----------------------------------------------------