Commit 3c9c75de authored by Rafael J. Wysocki's avatar Rafael J. Wysocki

Merge branches 'acpi-tables', 'acpi-bus' and 'acpi-processor'

* acpi-tables:
  ACPI: SPCR: Make SPCR available to x86
  ACPI / tables: Add IORT to injectable table list

* acpi-bus:
  ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530
  ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
  ACPI / bus: Do not call _STA on battery devices with unmet dependencies
  PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status
  ACPI: export acpi_bus_get_status_handle()

* acpi-processor:
  ACPI / processor: Set default C1 idle state description
  ACPI: processor_perflib: Do not send _PPC change notification if not ready
......@@ -917,9 +917,12 @@
earlycon= [KNL] Output early console device and options.
When used with no options, the early console is
determined by the stdout-path property in device
tree's chosen node.
[ARM64] The early console is determined by the
stdout-path property in device tree's chosen node,
or determined by the ACPI SPCR table.
[X86] When used with no options the early console is
determined by the ACPI SPCR table.
cdns,<addr>[,options]
Start an early, polled-mode console on a Cadence
......
......@@ -230,10 +230,10 @@ void __init acpi_boot_table_init(void)
done:
if (acpi_disabled) {
if (earlycon_init_is_deferred)
if (earlycon_acpi_spcr_enable)
early_init_dt_scan_chosen_stdout();
} else {
parse_spcr(earlycon_init_is_deferred);
acpi_parse_spcr(earlycon_acpi_spcr_enable, true);
if (IS_ENABLED(CONFIG_ACPI_BGRT))
acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt);
}
......
......@@ -36,6 +36,7 @@
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/efi-bgrt.h>
#include <linux/serial_core.h>
#include <asm/e820/api.h>
#include <asm/irqdomain.h>
......@@ -1625,6 +1626,8 @@ int __init acpi_boot_init(void)
if (!acpi_noirq)
x86_init.pci.init = pci_acpi_init;
/* Do not enable ACPI SPCR console by default */
acpi_parse_spcr(earlycon_acpi_spcr_enable, false);
return 0;
}
......
......@@ -79,7 +79,12 @@ config ACPI_DEBUGGER_USER
endif
config ACPI_SPCR_TABLE
bool
bool "ACPI Serial Port Console Redirection Support"
default y if X86
help
Enable support for Serial Port Console Redirection (SPCR) Table.
This table provides information about the configuration of the
earlycon console.
config ACPI_LPIT
bool
......
......@@ -66,10 +66,37 @@ static int set_copy_dsdt(const struct dmi_system_id *id)
return 0;
}
#endif
static int set_gbl_term_list(const struct dmi_system_id *id)
{
acpi_gbl_parse_table_as_term_list = 1;
return 0;
}
static const struct dmi_system_id dsdt_dmi_table[] __initconst = {
static const struct dmi_system_id acpi_quirks_dmi_table[] __initconst = {
/*
* Touchpad on Dell XPS 9570/Precision M5530 doesn't work under I2C
* mode.
* https://bugzilla.kernel.org/show_bug.cgi?id=198515
*/
{
.callback = set_gbl_term_list,
.ident = "Dell Precision M5530",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Precision M5530"),
},
},
{
.callback = set_gbl_term_list,
.ident = "Dell XPS 15 9570",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "XPS 15 9570"),
},
},
/*
* Invoke DSDT corruption work-around on all Toshiba Satellite.
* DSDT will be copied to memory.
* https://bugzilla.kernel.org/show_bug.cgi?id=14679
*/
{
......@@ -83,7 +110,7 @@ static const struct dmi_system_id dsdt_dmi_table[] __initconst = {
{}
};
#else
static const struct dmi_system_id dsdt_dmi_table[] __initconst = {
static const struct dmi_system_id acpi_quirks_dmi_table[] __initconst = {
{}
};
#endif
......@@ -108,6 +135,7 @@ acpi_status acpi_bus_get_status_handle(acpi_handle handle,
}
return status;
}
EXPORT_SYMBOL_GPL(acpi_bus_get_status_handle);
int acpi_bus_get_status(struct acpi_device *device)
{
......@@ -119,6 +147,12 @@ int acpi_bus_get_status(struct acpi_device *device)
return 0;
}
/* Battery devices must have their deps met before calling _STA */
if (acpi_device_is_battery(device) && device->dep_unmet) {
acpi_set_device_status(device, 0);
return 0;
}
status = acpi_bus_get_status_handle(device->handle, &sta);
if (ACPI_FAILURE(status))
return -ENODEV;
......@@ -1001,11 +1035,8 @@ void __init acpi_early_init(void)
acpi_permanent_mmap = true;
/*
* If the machine falls into the DMI check table,
* DSDT will be copied to memory
*/
dmi_check_system(dsdt_dmi_table);
/* Check machine-specific quirks */
dmi_check_system(acpi_quirks_dmi_table);
status = acpi_reallocate_root_table();
if (ACPI_FAILURE(status)) {
......
......@@ -291,6 +291,9 @@ static int acpi_processor_get_power_info_default(struct acpi_processor *pr)
pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
pr->power.states[ACPI_STATE_C1].valid = 1;
pr->power.states[ACPI_STATE_C1].entry_method = ACPI_CSTATE_HALT;
snprintf(pr->power.states[ACPI_STATE_C1].desc,
ACPI_CX_DESC_LEN, "ACPI HLT");
}
/* the C0 state only exists as a filler in our array */
pr->power.states[ACPI_STATE_C0].valid = 1;
......
......@@ -159,7 +159,7 @@ void acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag)
{
int ret;
if (ignore_ppc) {
if (ignore_ppc || !pr->performance) {
/*
* Only when it is notification event, the _OST object
* will be evaluated. Otherwise it is skipped.
......
......@@ -1565,6 +1565,8 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
device_initialize(&device->dev);
dev_set_uevent_suppress(&device->dev, true);
acpi_init_coherency(device);
/* Assume there are unmet deps until acpi_device_dep_initialize() runs */
device->dep_unmet = 1;
}
void acpi_device_add_finalize(struct acpi_device *device)
......@@ -1588,6 +1590,14 @@ static int acpi_add_single_object(struct acpi_device **child,
}
acpi_init_device_object(device, handle, type, sta);
/*
* For ACPI_BUS_TYPE_DEVICE getting the status is delayed till here so
* that we can call acpi_bus_get_status() and use its quirk handling.
* Note this must be done before the get power-/wakeup_dev-flags calls.
*/
if (type == ACPI_BUS_TYPE_DEVICE)
acpi_bus_get_status(device);
acpi_bus_get_power_flags(device);
acpi_bus_get_wakeup_device_flags(device);
......@@ -1660,9 +1670,11 @@ static int acpi_bus_type_and_status(acpi_handle handle, int *type,
return -ENODEV;
*type = ACPI_BUS_TYPE_DEVICE;
status = acpi_bus_get_status_handle(handle, sta);
if (ACPI_FAILURE(status))
*sta = 0;
/*
* acpi_add_single_object updates this once we've an acpi_device
* so that acpi_bus_get_status' quirk handling can be used.
*/
*sta = 0;
break;
case ACPI_TYPE_PROCESSOR:
*type = ACPI_BUS_TYPE_PROCESSOR;
......@@ -1760,6 +1772,8 @@ static void acpi_device_dep_initialize(struct acpi_device *adev)
acpi_status status;
int i;
adev->dep_unmet = 0;
if (!acpi_has_method(adev->handle, "_DEP"))
return;
......
......@@ -21,7 +21,7 @@
* occasionally getting stuck as 1. To avoid the potential for a hang, check
* TXFE == 0 instead of BUSY == 1. This may not be suitable for all UART
* implementations, so only do so if an affected platform is detected in
* parse_spcr().
* acpi_parse_spcr().
*/
bool qdf2400_e44_present;
EXPORT_SYMBOL(qdf2400_e44_present);
......@@ -74,19 +74,21 @@ static bool xgene_8250_erratum_present(struct acpi_table_spcr *tb)
}
/**
* parse_spcr() - parse ACPI SPCR table and add preferred console
* acpi_parse_spcr() - parse ACPI SPCR table and add preferred console
*
* @earlycon: set up earlycon for the console specified by the table
* @enable_earlycon: set up earlycon for the console specified by the table
* @enable_console: setup the console specified by the table.
*
* For the architectures with support for ACPI, CONFIG_ACPI_SPCR_TABLE may be
* defined to parse ACPI SPCR table. As a result of the parsing preferred
* console is registered and if @earlycon is true, earlycon is set up.
* console is registered and if @enable_earlycon is true, earlycon is set up.
* If @enable_console is true the system console is also configured.
*
* When CONFIG_ACPI_SPCR_TABLE is defined, this function should be called
* from arch initialization code as soon as the DT/ACPI decision is made.
*
*/
int __init parse_spcr(bool earlycon)
int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console)
{
static char opts[64];
struct acpi_table_spcr *table;
......@@ -105,11 +107,8 @@ int __init parse_spcr(bool earlycon)
if (ACPI_FAILURE(status))
return -ENOENT;
if (table->header.revision < 2) {
err = -ENOENT;
pr_err("wrong table version\n");
goto done;
}
if (table->header.revision < 2)
pr_info("SPCR table version %d\n", table->header.revision);
if (table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
switch (ACPI_ACCESS_BIT_WIDTH((
......@@ -185,7 +184,7 @@ int __init parse_spcr(bool earlycon)
*/
if (qdf2400_erratum_44_present(&table->header)) {
qdf2400_e44_present = true;
if (earlycon)
if (enable_earlycon)
uart = "qdf2400_e44";
}
......@@ -205,11 +204,13 @@ int __init parse_spcr(bool earlycon)
pr_info("console: %s\n", opts);
if (earlycon)
if (enable_earlycon)
setup_earlycon(opts);
err = add_preferred_console(uart, 0, opts + strlen(uart) + 1);
if (enable_console)
err = add_preferred_console(uart, 0, opts + strlen(uart) + 1);
else
err = 0;
done:
acpi_put_table((struct acpi_table_header *)table);
return err;
......
......@@ -456,7 +456,8 @@ static const char * const table_sigs[] = {
ACPI_SIG_SLIC, ACPI_SIG_SPCR, ACPI_SIG_SPMI, ACPI_SIG_TCPA,
ACPI_SIG_UEFI, ACPI_SIG_WAET, ACPI_SIG_WDAT, ACPI_SIG_WDDT,
ACPI_SIG_WDRT, ACPI_SIG_DSDT, ACPI_SIG_FADT, ACPI_SIG_PSDT,
ACPI_SIG_RSDT, ACPI_SIG_XSDT, ACPI_SIG_SSDT, NULL };
ACPI_SIG_RSDT, ACPI_SIG_XSDT, ACPI_SIG_SSDT, ACPI_SIG_IORT,
NULL };
#define ACPI_HEADER_SIZE sizeof(struct acpi_table_header)
......
......@@ -399,6 +399,7 @@ static acpi_status __init ibm_find_acpi_device(acpi_handle handle,
u32 lvl, void *context, void **rv)
{
acpi_handle *phandle = (acpi_handle *)context;
unsigned long long current_status = 0;
acpi_status status;
struct acpi_device_info *info;
int retval = 0;
......@@ -410,7 +411,9 @@ static acpi_status __init ibm_find_acpi_device(acpi_handle handle,
return retval;
}
if (info->current_status && (info->valid & ACPI_VALID_HID) &&
acpi_bus_get_status_handle(handle, &current_status);
if (current_status && (info->valid & ACPI_VALID_HID) &&
(!strcmp(info->hardware_id.string, IBM_HARDWARE_ID1) ||
!strcmp(info->hardware_id.string, IBM_HARDWARE_ID2))) {
pr_debug("found hardware: %s, handle: %p\n",
......
......@@ -197,25 +197,20 @@ int __init setup_earlycon(char *buf)
}
/*
* When CONFIG_ACPI_SPCR_TABLE is defined, "earlycon" without parameters in
* command line does not start DT earlycon immediately, instead it defers
* starting it until DT/ACPI decision is made. At that time if ACPI is enabled
* call parse_spcr(), else call early_init_dt_scan_chosen_stdout()
* This defers the initialization of the early console until after ACPI has
* been initialized.
*/
bool earlycon_init_is_deferred __initdata;
bool earlycon_acpi_spcr_enable __initdata;
/* early_param wrapper for setup_earlycon() */
static int __init param_setup_earlycon(char *buf)
{
int err;
/*
* Just 'earlycon' is a valid param for devicetree earlycons;
* don't generate a warning from parse_early_params() in that case
*/
/* Just 'earlycon' is a valid param for devicetree and ACPI SPCR. */
if (!buf || !buf[0]) {
if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) {
earlycon_init_is_deferred = true;
earlycon_acpi_spcr_enable = true;
return 0;
} else if (!buf) {
return early_init_dt_scan_chosen_stdout();
......
......@@ -1249,9 +1249,12 @@ static inline bool acpi_has_watchdog(void) { return false; }
#ifdef CONFIG_ACPI_SPCR_TABLE
extern bool qdf2400_e44_present;
int parse_spcr(bool earlycon);
int acpi_parse_spcr(bool enable_earlycon, bool enable_console);
#else
static inline int parse_spcr(bool earlycon) { return 0; }
static inline int acpi_parse_spcr(bool enable_earlycon, bool enable_console)
{
return 0;
}
#endif
#if IS_ENABLED(CONFIG_ACPI_GENERIC_GSI)
......
......@@ -376,10 +376,10 @@ extern int of_setup_earlycon(const struct earlycon_id *match,
const char *options);
#ifdef CONFIG_SERIAL_EARLYCON
extern bool earlycon_init_is_deferred __initdata;
extern bool earlycon_acpi_spcr_enable __initdata;
int setup_earlycon(char *buf);
#else
static const bool earlycon_init_is_deferred;
static const bool earlycon_acpi_spcr_enable;
static inline int setup_earlycon(char *buf) { return 0; }
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment