ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled

Add DBG_PC_INTR debug level and use it to always log debug info
in idetape_pc_intr() if debugging is enabled.

While at it:

* Use drive->name instead of tape->name.

* Log device name with "DMA finished" message.

This is a preparation for adding generic ide_pc_intr() helper.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 08424ac2
......@@ -56,6 +56,8 @@ enum {
DBG_PROCS = (1 << 3),
/* buffer alloc info (pc_stack & rq_stack) */
DBG_PCRQ_STACK = (1 << 4),
/* IRQ handler (always log debug info if debugging is on) */
DBG_PC_INTR = (1 << 5),
};
/* define to see debug info */
......@@ -64,7 +66,7 @@ enum {
#if IDETAPE_DEBUG_LOG
#define debug_log(lvl, fmt, args...) \
{ \
if (tape->debug_mask & lvl) \
if ((lvl & DBG_PC_INTR) || (tape->debug_mask & lvl)) \
printk(KERN_INFO "ide-tape: " fmt, ## args); \
}
#else
......@@ -806,7 +808,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
u16 bcount;
u8 stat, ireason;
debug_log(DBG_PROCS, "Enter %s - interrupt handler\n", __func__);
debug_log(DBG_PC_INTR, "Enter %s - interrupt handler\n", __func__);
/* Clear the interrupt */
stat = ide_read_status(drive);
......@@ -818,13 +820,12 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
pc->xferred = pc->req_xfer;
idetape_update_buffers(pc);
}
debug_log(DBG_PROCS, "DMA finished\n");
debug_log(DBG_PC_INTR, "%s: DMA finished\n", drive->name);
}
/* No more interrupts */
if ((stat & DRQ_STAT) == 0) {
debug_log(DBG_SENSE, "Packet command completed, %d bytes"
debug_log(DBG_PC_INTR, "Packet command completed, %d bytes"
" transferred\n", pc->xferred);
pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
......@@ -834,14 +835,14 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
stat &= ~ERR_STAT;
if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
/* Error detected */
debug_log(DBG_ERR, "%s: I/O error\n", tape->name);
debug_log(DBG_PC_INTR, "%s: I/O error\n", drive->name);
if (pc->c[0] == REQUEST_SENSE) {
printk(KERN_ERR "%s: I/O error in request sense"
" command\n", drive->name);
return ide_do_reset(drive);
}
debug_log(DBG_ERR, "[cmd %x]: check condition\n",
debug_log(DBG_PC_INTR, "[cmd %x]: check condition\n",
pc->c[0]);
/* Retry operation */
......@@ -898,7 +899,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
IDETAPE_WAIT_CMD, NULL);
return ide_started;
}
debug_log(DBG_SENSE, "The device wants to send us more "
debug_log(DBG_PC_INTR, "The device wants to send us more "
"data than expected - allowing transfer\n");
}
xferfunc = hwif->input_data;
......@@ -916,7 +917,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
pc->xferred += bcount;
pc->cur_pos += bcount;
debug_log(DBG_SENSE, "[cmd %x] transferred %d bytes on that intr.\n",
debug_log(DBG_PC_INTR, "[cmd %x] transferred %d bytes on that intr.\n",
pc->c[0], bcount);
/* And set the interrupt handler again */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment