Commit 3e825ec9 authored by Octavian Purdila's avatar Octavian Purdila Committed by Jonathan Cameron

iio: bmc150: introduce bmc150_accel_interrupt

Since both triggers and events can share an interrupt, add a data
structure that tracks the users of an interrupt so that it enables or
disables it only for the first users and respectively last user.

This will allows us to easily add more events or triggers.

The patch also adds an interrupt enabled counter, so that we can
easily know if we need to put the device in normal mode when the
resume callback is issued.
Signed-off-by: default avatarOctavian Purdila <octavian.purdila@intel.com>
Reviewed-by: default avatarSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 1fad034c
......@@ -147,10 +147,24 @@ struct bmc150_accel_chip_info {
const struct bmc150_scale_info scale_table[4];
};
struct bmc150_accel_interrupt {
const struct bmc150_accel_interrupt_info *info;
atomic_t users;
};
enum bmc150_accel_interrupt_id {
BMC150_ACCEL_INT_DATA_READY,
BMC150_ACCEL_INT_ANY_MOTION,
BMC150_ACCEL_INT_WATERMARK,
BMC150_ACCEL_INTERRUPTS,
};
struct bmc150_accel_data {
struct i2c_client *client;
struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS];
struct iio_trigger *dready_trig;
struct iio_trigger *motion_trig;
atomic_t active_intr;
struct mutex mutex;
s16 buffer[8];
u8 bw_bits;
......@@ -421,7 +435,7 @@ static const struct bmc150_accel_interrupt_info {
u8 map_bitmask;
u8 en_reg;
u8 en_bitmask;
} bmc150_accel_interrupts[] = {
} bmc150_accel_interrupts[BMC150_ACCEL_INTERRUPTS] = {
{ /* data ready interrupt */
.map_reg = BMC150_ACCEL_REG_INT_MAP_1,
.map_bitmask = BMC150_ACCEL_INT_MAP_1_BIT_DATA,
......@@ -438,12 +452,30 @@ static const struct bmc150_accel_interrupt_info {
},
};
static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data,
const struct bmc150_accel_interrupt_info *info,
static void bmc150_accel_interrupts_setup(struct iio_dev *indio_dev,
struct bmc150_accel_data *data)
{
int i;
for (i = 0; i < BMC150_ACCEL_INTERRUPTS; i++)
data->interrupts[i].info = &bmc150_accel_interrupts[i];
}
static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i,
bool state)
{
struct bmc150_accel_interrupt *intr = &data->interrupts[i];
const struct bmc150_accel_interrupt_info *info = intr->info;
int ret;
if (state) {
if (atomic_inc_return(&intr->users) > 1)
return 0;
} else {
if (atomic_dec_return(&intr->users) > 0)
return 0;
}
/*
* We will expect the enable and disable to do operation in
* in reverse order. This will happen here anyway as our
......@@ -493,6 +525,11 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data,
goto out_fix_power_state;
}
if (state)
atomic_inc(&data->active_intr);
else
atomic_dec(&data->active_intr);
return 0;
out_fix_power_state:
......@@ -500,20 +537,6 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data,
return ret;
}
static int bmc150_accel_setup_any_motion_interrupt(
struct bmc150_accel_data *data,
bool status)
{
return bmc150_accel_set_interrupt(data, &bmc150_accel_interrupts[1],
status);
}
static int bmc150_accel_setup_new_data_interrupt(struct bmc150_accel_data *data,
bool status)
{
return bmc150_accel_set_interrupt(data, &bmc150_accel_interrupts[0],
status);
}
static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val)
{
......@@ -753,13 +776,8 @@ static int bmc150_accel_write_event_config(struct iio_dev *indio_dev,
mutex_lock(&data->mutex);
if (!state && data->motion_trigger_on) {
data->ev_enable_state = 0;
mutex_unlock(&data->mutex);
return 0;
}
ret = bmc150_accel_setup_any_motion_interrupt(data, state);
ret = bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_ANY_MOTION,
state);
if (ret < 0) {
mutex_unlock(&data->mutex);
return ret;
......@@ -996,19 +1014,16 @@ static int bmc150_accel_data_rdy_trigger_set_state(struct iio_trigger *trig,
}
}
if (!state && data->ev_enable_state && data->motion_trigger_on) {
data->motion_trigger_on = false;
mutex_unlock(&data->mutex);
return 0;
}
if (data->motion_trig == trig) {
ret = bmc150_accel_update_slope(data);
if (!ret)
ret = bmc150_accel_setup_any_motion_interrupt(data,
state);
ret = bmc150_accel_set_interrupt(data,
BMC150_ACCEL_INT_ANY_MOTION,
state);
} else {
ret = bmc150_accel_setup_new_data_interrupt(data, state);
ret = bmc150_accel_set_interrupt(data,
BMC150_ACCEL_INT_DATA_READY,
state);
}
if (ret < 0) {
mutex_unlock(&data->mutex);
......@@ -1206,6 +1221,8 @@ static int bmc150_accel_probe(struct i2c_client *client,
return ret;
}
bmc150_accel_interrupts_setup(indio_dev, data);
data->dready_trig = devm_iio_trigger_alloc(&client->dev,
"%s-dev%d",
indio_dev->name,
......@@ -1321,8 +1338,7 @@ static int bmc150_accel_resume(struct device *dev)
struct bmc150_accel_data *data = iio_priv(indio_dev);
mutex_lock(&data->mutex);
if (data->dready_trigger_on || data->motion_trigger_on ||
data->ev_enable_state)
if (atomic_read(&data->active_intr))
bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
mutex_unlock(&data->mutex);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment