Commit 3ea6bc3d authored by Markus Brunner's avatar Markus Brunner Committed by Paul Mundt

sh: Add SH7720 CPU support.

This adds support for the SH7720 (SH3-DSP) CPU.

Signed-off by: Markus Brunner <super.firetwister@gmail.com>
Signed-off by: Mark Jonas <toertel@gmail.com>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent dfc5ed2a
......@@ -34,6 +34,7 @@ config EARLY_SCIF_CONSOLE_PORT
default "0xfffe9800" if CPU_SUBTYPE_SH7206
default "0xf8420000" if CPU_SUBTYPE_SH7619
default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
default "0xa4430000" if CPU_SUBTYPE_SH7720
default "0xffc30000" if CPU_SUBTYPE_SHX3
default "0xffe80000" if CPU_SH4
default "0x00000000"
......
......@@ -12,6 +12,7 @@ config SH_DMA
config NR_ONCHIP_DMA_CHANNELS
int
depends on SH_DMA
default "6" if CPU_SUBTYPE_SH7720
default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R
default "12" if CPU_SUBTYPE_SH7780
default "4"
......
......@@ -24,13 +24,18 @@ static int dmte_irq_map[] = {
DMTE1_IRQ,
DMTE2_IRQ,
DMTE3_IRQ,
#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
defined(CONFIG_CPU_SUBTYPE_SH7760) || \
defined(CONFIG_CPU_SUBTYPE_SH7780)
DMTE4_IRQ,
DMTE5_IRQ,
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
defined(CONFIG_CPU_SUBTYPE_SH7760) || \
defined(CONFIG_CPU_SUBTYPE_SH7780)
DMTE6_IRQ,
DMTE7_IRQ,
DMTE7_IRQ,
#endif
};
......@@ -196,7 +201,8 @@ static int sh_dmac_get_dma_residue(struct dma_channel *chan)
return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan);
}
#ifdef CONFIG_CPU_SUBTYPE_SH7780
#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7780)
#define dmaor_read_reg() ctrl_inw(DMAOR)
#define dmaor_write_reg(data) ctrl_outw(data, DMAOR)
#else
......
......@@ -12,6 +12,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh770x.o
obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o
obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o
obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o
obj-$(CONFIG_CPU_SUBTYPE_SH7720) += setup-sh7720.o
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SH3) := clock-sh3.o
......@@ -19,5 +20,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o
clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o
clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o
clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7710.o
clock-$(CONFIG_CPU_SUBTYPE_SH7720) := clock-sh7710.o
obj-y += $(clock-y)
......@@ -81,6 +81,9 @@ int __init detect_cpu_and_cache_system(void)
#if defined(CONFIG_CPU_SUBTYPE_SH7712)
current_cpu_data.type = CPU_SH7712;
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7720)
current_cpu_data.type = CPU_SH7720;
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
current_cpu_data.type = CPU_SH7705;
......
/*
* SH7720 Setup
*
* Copyright (C) 2007 Markus Brunner, Mark Jonas
*
* Based on arch/sh/kernel/cpu/sh4/setup-sh7750.c:
*
* Copyright (C) 2006 Paul Mundt
* Copyright (C) 2006 Jamie Lenehan
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/io.h>
#include <asm/sci.h>
#include <asm/rtc.h>
#define INTC_ICR1 0xA4140010UL
#define INTC_ICR_IRLM 0x4000
#define INTC_ICR_IRQ (~INTC_ICR_IRLM)
static struct resource rtc_resources[] = {
[0] = {
.start = 0xa413fec0,
.end = 0xa413fec0 + 0x28 - 1,
.flags = IORESOURCE_IO,
},
[1] = {
/* Period IRQ */
.start = 21,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* Carry IRQ */
.start = 22,
.flags = IORESOURCE_IRQ,
},
[3] = {
/* Alarm IRQ */
.start = 20,
.flags = IORESOURCE_IRQ,
},
};
static struct sh_rtc_platform_info rtc_info = {
.capabilities = RTC_CAP_4_DIGIT_YEAR,
};
static struct platform_device rtc_device = {
.name = "sh-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
.dev = {
.platform_data = &rtc_info,
},
};
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xa4430000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 80, 80, 80, 80 },
}, {
.mapbase = 0xa4438000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 81, 81, 81, 81 },
}, {
.flags = 0,
}
};
static struct platform_device sci_device = {
.name = "sh-sci",
.id = -1,
.dev = {
.platform_data = sci_platform_data,
},
};
static struct platform_device *sh7720_devices[] __initdata = {
&rtc_device,
&sci_device,
};
static int __init sh7720_devices_setup(void)
{
return platform_add_devices(sh7720_devices,
ARRAY_SIZE(sh7720_devices));
}
__initcall(sh7720_devices_setup);
enum {
UNUSED = 0,
/* interrupt sources */
TMU0, TMU1, TMU2, RTC_ATI, RTC_PRI, RTC_CUI,
WDT, REF_RCMI, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND,
IRQ0, IRQ1, IRQ2, IRQ3,
USBF_SPD, TMU_SUNI, IRQ5, IRQ4,
DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3, LCDC, SSL,
ADC, DMAC2_DEI4, DMAC2_DEI5, USBFI0, USBFI1, CMT,
SCIF0, SCIF1,
PINT07, PINT815, TPU0, TPU1, TPU2, TPU3, IIC,
SIOF0, SIOF1, MMCI0, MMCI1, MMCI2, MMCI3, PCC,
USBHI, AFEIF,
H_UDI,
/* interrupt groups */
TMU, RTC, SIM, DMAC1, USBFI, DMAC2, USB, TPU, MMC,
};
static struct intc_vect vectors[] __initdata = {
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
INTC_VECT(TMU2, 0x440), INTC_VECT(RTC_ATI, 0x480),
INTC_VECT(RTC_PRI, 0x4a0), INTC_VECT(RTC_CUI, 0x4c0),
INTC_VECT(SIM_ERI, 0x4e0), INTC_VECT(SIM_RXI, 0x500),
INTC_VECT(SIM_TXI, 0x520), INTC_VECT(SIM_TEND, 0x540),
INTC_VECT(WDT, 0x560), INTC_VECT(REF_RCMI, 0x580),
/* H_UDI cannot be masked */ INTC_VECT(TMU_SUNI, 0x6c0),
INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1_DEI0, 0x800),
INTC_VECT(DMAC1_DEI1, 0x820), INTC_VECT(DMAC1_DEI2, 0x840),
INTC_VECT(DMAC1_DEI3, 0x860), INTC_VECT(LCDC, 0x900),
INTC_VECT(SSL, 0x980), INTC_VECT(USBFI0, 0xa20),
INTC_VECT(USBFI1, 0xa40), INTC_VECT(USBHI, 0xa60),
INTC_VECT(DMAC2_DEI4, 0xb80), INTC_VECT(DMAC2_DEI5, 0xba0),
INTC_VECT(ADC, 0xbe0), INTC_VECT(SCIF0, 0xc00),
INTC_VECT(SCIF1, 0xc20), INTC_VECT(PINT07, 0xc80),
INTC_VECT(PINT815, 0xca0), INTC_VECT(SIOF0, 0xd00),
INTC_VECT(SIOF1, 0xd20), INTC_VECT(TPU0, 0xd80),
INTC_VECT(TPU1, 0xda0), INTC_VECT(TPU2, 0xdc0),
INTC_VECT(TPU3, 0xde0), INTC_VECT(IIC, 0xe00),
INTC_VECT(MMCI0, 0xe80), INTC_VECT(MMCI1, 0xea0),
INTC_VECT(MMCI2, 0xec0), INTC_VECT(MMCI3, 0xee0),
INTC_VECT(CMT, 0xf00), INTC_VECT(PCC, 0xf60),
INTC_VECT(AFEIF, 0xfe0),
};
static struct intc_group groups[] __initdata = {
INTC_GROUP(TMU, TMU0, TMU1, TMU2),
INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND),
INTC_GROUP(DMAC1, DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3),
INTC_GROUP(USBFI, USBFI0, USBFI1),
INTC_GROUP(DMAC2, DMAC2_DEI4, DMAC2_DEI5),
INTC_GROUP(TPU, TPU0, TPU1, TPU2, TPU3),
INTC_GROUP(MMC, MMCI0, MMCI1, MMCI2, MMCI3),
};
static struct intc_prio priorities[] __initdata = {
INTC_PRIO(SCIF0, 2),
INTC_PRIO(SCIF1, 2),
INTC_PRIO(DMAC1, 1),
INTC_PRIO(DMAC2, 1),
INTC_PRIO(RTC, 2),
INTC_PRIO(TMU, 2),
INTC_PRIO(TPU, 2),
};
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
{ 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } },
{ 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
{ 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } },
{ 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } },
{ 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } },
{ 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } },
{ 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } },
{ 0xA4080006UL, 0, 16, 4, /* IPRI */ { SIOF0, SIOF1, MMC, PCC } },
{ 0xA4080008UL, 0, 16, 4, /* IPRJ */ { 0, USBHI, 0, AFEIF } },
};
static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups,
priorities, NULL, prio_registers, NULL);
static struct intc_sense_reg sense_registers[] __initdata = {
{ INTC_ICR1, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
};
static struct intc_vect vectors_irq[] __initdata = {
INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
};
static DECLARE_INTC_DESC(intc_irq_desc, "sh7720-irq", vectors_irq,
NULL, priorities, NULL, prio_registers, sense_registers);
void __init plat_irq_setup_pins(int mode)
{
switch (mode) {
case IRQ_MODE_IRQ:
ctrl_outw(ctrl_inw(INTC_ICR1) & INTC_ICR_IRQ, INTC_ICR1);
register_intc_controller(&intc_irq_desc);
break;
default:
BUG();
}
}
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
}
......@@ -13,6 +13,7 @@
#include <linux/tty.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/delay.h>
#ifdef CONFIG_SH_STANDARD_BIOS
#include <asm/sh_bios.h>
......@@ -62,6 +63,18 @@ static struct console bios_console = {
#include <linux/serial_core.h>
#include "../../../drivers/serial/sh-sci.h"
#if defined(CONFIG_CPU_SUBTYPE_SH7720)
#define EPK_SCSMR_VALUE 0x000
#define EPK_SCBRR_VALUE 0x00C
#define EPK_FIFO_SIZE 64
#define EPK_FIFO_BITS (0x7f00 >> 8)
#else
#define EPK_FIFO_SIZE 16
#define EPK_FIFO_BITS (0x1f00 >> 8)
#endif
static struct uart_port scif_port = {
.mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT,
.membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT,
......@@ -69,7 +82,7 @@ static struct uart_port scif_port = {
static void scif_sercon_putc(int c)
{
while (((sci_in(&scif_port, SCFDR) & 0x1f00 >> 8) == 16))
while (((sci_in(&scif_port, SCFDR) & EPK_FIFO_BITS) >= EPK_FIFO_SIZE))
;
sci_out(&scif_port, SCxTDR, c);
......@@ -105,7 +118,22 @@ static struct console scif_console = {
.index = -1,
};
#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
#if !defined(CONFIG_SH_STANDARD_BIOS)
#if defined(CONFIG_CPU_SUBTYPE_SH7720)
static void scif_sercon_init(char *s)
{
sci_out(&scif_port, SCSCR, 0x0000); /* clear TE and RE */
sci_out(&scif_port, SCFCR, 0x4006); /* reset */
sci_out(&scif_port, SCSCR, 0x0000); /* select internal clock */
sci_out(&scif_port, SCSMR, EPK_SCSMR_VALUE);
sci_out(&scif_port, SCBRR, EPK_SCBRR_VALUE);
mdelay(1); /* wait 1-bit time */
sci_out(&scif_port, SCFCR, 0x0030); /* TTRG=b'11 */
sci_out(&scif_port, SCSCR, 0x0030); /* TE, RE */
}
#elif defined(CONFIG_CPU_SH4)
#define DEFAULT_BAUD 115200
/*
* Simple SCIF init, primarily aimed at SH7750 and other similar SH-4
......@@ -146,7 +174,8 @@ static void scif_sercon_init(char *s)
ctrl_outw(0, scif_port.mapbase + 36);
ctrl_outw(0x30, scif_port.mapbase + 8);
}
#endif /* CONFIG_CPU_SH4 && !CONFIG_SH_STANDARD_BIOS */
#endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */
#endif /* !defined(CONFIG_SH_STANDARD_BIOS) */
#endif /* CONFIG_EARLY_SCIF_CONSOLE */
/*
......@@ -186,7 +215,8 @@ int __init setup_early_printk(char *buf)
if (!strncmp(buf, "serial", 6)) {
early_console = &scif_console;
#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS)
#if (defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SUBTYPE_SH7720)) && \
!defined(CONFIG_SH_STANDARD_BIOS)
scif_sercon_init(buf + 6);
#endif
}
......
......@@ -279,7 +279,7 @@ static const char *cpu_name[] = {
[CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706",
[CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708",
[CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710",
[CPU_SH7712] = "SH7712",
[CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720",
[CPU_SH7729] = "SH7729", [CPU_SH7750] = "SH7750",
[CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R",
[CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R",
......
......@@ -173,7 +173,8 @@ static int tmu_timer_init(void)
tmu_timer_stop();
#if !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \
!defined(CONFIG_CPU_SUBTYPE_SH7760) && \
!defined(CONFIG_CPU_SUBTYPE_SH7785) && \
!defined(CONFIG_CPU_SUBTYPE_SHX3)
ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
......
......@@ -111,6 +111,14 @@ config CPU_SUBTYPE_SH7712
help
Select SH7712 if you have a SH3-DSP SH7712 CPU.
config CPU_SUBTYPE_SH7720
bool "Support SH7720 processor"
select CPU_SH3
select CPU_HAS_INTC_IRQ
select CPU_HAS_DSP
help
Select SH7720 if you have a SH3-DSP SH7720 CPU.
# SH-4 Processor Support
config CPU_SUBTYPE_SH7750
......
......@@ -4,6 +4,7 @@
* SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
*
* Copyright (C) 2002 - 2006 Paul Mundt
* Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
*
* based off of the old drivers/char/sh-sci.c by:
*
......@@ -301,6 +302,38 @@ static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
}
sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
unsigned short data;
if (cflag & CRTSCTS) {
/* enable RTS/CTS */
if (port->mapbase == 0xa4430000) { /* SCIF0 */
/* Clear PTCR bit 9-2; enable all scif pins but sck */
data = ctrl_inw(PORT_PTCR);
ctrl_outw((data & 0xfc03), PORT_PTCR);
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
/* Clear PVCR bit 9-2 */
data = ctrl_inw(PORT_PVCR);
ctrl_outw((data & 0xfc03), PORT_PVCR);
}
fcr_val |= SCFCR_MCE;
} else {
if (port->mapbase == 0xa4430000) { /* SCIF0 */
/* Clear PTCR bit 5-2; enable only tx and rx */
data = ctrl_inw(PORT_PTCR);
ctrl_outw((data & 0xffc3), PORT_PTCR);
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
/* Clear PVCR bit 5-2 */
data = ctrl_inw(PORT_PVCR);
ctrl_outw((data & 0xffc3), PORT_PVCR);
}
}
sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SH3)
/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
......
......@@ -10,19 +10,19 @@
* Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
* Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
* Removed SH7300 support (Jul 2007).
* Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Aug 2007).
*/
#include <linux/serial_core.h>
#include <asm/io.h>
#if defined(__H8300H__) || defined(__H8300S__)
#include <asm/gpio.h>
#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
#include <asm/regs306x.h>
#endif
#if defined(CONFIG_H8S2678)
#include <asm/regs267x.h>
#endif
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7707) || \
......@@ -46,6 +46,10 @@
*/
# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCIF_ONLY
#define SCIF_ORER 0x0200 /* overrun error bit */
#elif defined(CONFIG_SH_RTS7751R2D)
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
......@@ -217,7 +221,8 @@
#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720)
#define SCIF_ORER 0x0200
#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
#define SCIF_RFDC_MASK 0x007f
......@@ -254,7 +259,8 @@
# define SCxSR_FER(port) SCIF_FER
# define SCxSR_PER(port) SCIF_PER
# define SCxSR_BRK(port) SCIF_BRK
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720)
# define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc)
# define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73)
# define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf)
......@@ -362,7 +368,8 @@
CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size)
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#else
......@@ -388,7 +395,8 @@
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
......@@ -510,7 +518,15 @@ static inline void set_sh771x_scif_pfc(struct uart_port *port)
return;
}
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7720)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xa4430000)
return sci_in(port, SCxSR) & 0x0003 ? 1 : 0;
else if (port->mapbase == 0xa4438000)
return sci_in(port, SCxSR) & 0x0003 ? 1 : 0;
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
defined(CONFIG_CPU_SUBTYPE_SH7751) || \
defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
......@@ -692,7 +708,8 @@ static inline int sci_rxd_in(struct uart_port *port)
#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
#elif defined(__H8300H__) || defined(__H8300S__)
#define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)
......
......@@ -26,7 +26,9 @@
#define CCR_CACHE_ENABLE CCR_CACHE_CE
#define CCR_CACHE_INVALIDATE CCR_CACHE_CF
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7710)
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7710) || \
defined(CONFIG_CPU_SUBTYPE_SH7720)
#define CCR3 0xa40000b4
#define CCR_CACHE_16KB 0x00010000
#define CCR_CACHE_32KB 0x00020000
......
#ifndef __ASM_CPU_SH3_DMA_H
#define __ASM_CPU_SH3_DMA_H
#if defined(CONFIG_CPU_SUBTYPE_SH7720)
#define SH_DMAC_BASE 0xa4010020
#define DMTE0_IRQ 48
#define DMTE1_IRQ 49
#define DMTE2_IRQ 50
#define DMTE3_IRQ 51
#define DMTE4_IRQ 76
#define DMTE5_IRQ 77
#else
#define SH_DMAC_BASE 0xa4000020
#endif
/* Definitions for the SuperH DMAC */
#define TM_BURST 0x00000020
......
......@@ -27,12 +27,13 @@
#define TRA 0xffffffd0
#define EXPEVT 0xffffffd4
#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
defined(CONFIG_CPU_SUBTYPE_SH7709) || \
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7707) || \
defined(CONFIG_CPU_SUBTYPE_SH7709) || \
defined(CONFIG_CPU_SUBTYPE_SH7710) || \
defined(CONFIG_CPU_SUBTYPE_SH7712) || \
defined(CONFIG_CPU_SUBTYPE_SH7710)
defined(CONFIG_CPU_SUBTYPE_SH7720)
#define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */
#else
#define INTEVT 0xffffffd8
......
......@@ -23,11 +23,13 @@
* ---------------------------------------------------------------------------
*/
#if !defined(CONFIG_CPU_SUBTYPE_SH7727)
#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \
!defined(CONFIG_CPU_SUBTYPE_SH7727)
#define TMU_TOCR 0xfffffe90 /* Byte access */
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7710)
#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
defined(CONFIG_CPU_SUBTYPE_SH7720)
#define TMU_012_TSTR 0xa412fe92 /* Byte access */
#define TMU0_TCOR 0xa412fe94 /* Long access */
......@@ -56,7 +58,8 @@
#define TMU2_TCOR 0xfffffeac /* Long access */
#define TMU2_TCNT 0xfffffeb0 /* Long access */
#define TMU2_TCR 0xfffffeb4 /* Word access */
#if !defined(CONFIG_CPU_SUBTYPE_SH7727)
#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \
!defined(CONFIG_CPU_SUBTYPE_SH7727)
#define TMU2_TCPR2 0xfffffeb8 /* Long access */
#endif
#endif
......
......@@ -11,7 +11,8 @@
#ifndef __ASM_CPU_SH3_UBC_H
#define __ASM_CPU_SH3_UBC_H
#if defined(CONFIG_CPU_SUBTYPE_SH7710)
#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
defined(CONFIG_CPU_SUBTYPE_SH7720)
#define UBC_BARA 0xa4ffffb0
#define UBC_BAMRA 0xa4ffffb4
#define UBC_BBRA 0xa4ffffb8
......
......@@ -45,7 +45,7 @@ enum cpu_type {
CPU_SH7705, CPU_SH7706, CPU_SH7707,
CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
CPU_SH7729,
CPU_SH7720, CPU_SH7729,
/* SH-4 types */
CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment