libertas: Improvements on automatic tx power control via SIOCSIWTXPOW (fixups)

This patch addresses comments from Dan Williams about the patch
committed as "libertas: Improvements on automatic tx power control via
SIOCSIWTXPOW."
Signed-off-by: Anna Neal <anna@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/libertas/cmd.c

@@ -1949,7 +1949,7 @@ int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
 	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
 	cmd.action = cpu_to_le16(CMD_ACT_SET);
 	cmd.enable = !!enable;
-	cmd.usesnr = !!enable;
+	cmd.usesnr = !!usesnr;
 	cmd.P0 = p0;
 	cmd.P1 = p1;
 	cmd.P2 = p2;

drivers/net/wireless/libertas/cmd.h

@@ -32,6 +32,12 @@ int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
 int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
 		int8_t p2, int usesnr);
 
+int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
+		int8_t p1, int8_t p2);
+
+int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
+		int8_t p2, int usesnr);
+
 int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra,
 		     struct cmd_header *resp);
 

drivers/net/wireless/libertas/defs.h

@@ -189,7 +189,6 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in
 #define MRVDRV_CMD_UPLD_RDY		0x0008
 #define MRVDRV_CARDEVENT		0x0010
 
-
 /* Automatic TX control default levels */
 #define POW_ADAPT_DEFAULT_P0 13
 #define POW_ADAPT_DEFAULT_P1 15

drivers/net/wireless/libertas/wext.c

@@ -1025,6 +1025,18 @@ static int lbs_set_rate(struct net_device *dev, struct iw_request_info *info,
 				new_rate);
 			goto out;
 		}
+		if (priv->fwrelease < 0x09000000) {
+			ret = lbs_set_power_adapt_cfg(priv, 0,
+					POW_ADAPT_DEFAULT_P0,
+					POW_ADAPT_DEFAULT_P1,
+					POW_ADAPT_DEFAULT_P2);
+			if (ret)
+				goto out;
+		}
+		ret = lbs_set_tpc_cfg(priv, 0, TPC_DEFAULT_P0, TPC_DEFAULT_P1,
+				TPC_DEFAULT_P2, 1);
+		if (ret)
+			goto out;
 	}
 
 	/* Try the newer command first (Firmware Spec 5.1 and above) */