Commit 3f241bfa authored by Jagan Teki's avatar Jagan Teki Committed by Maxime Ripard

arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0

Since current tree support AXP803 regulators, replace
fixed regulator with AXP803 dcdc1 regulator.

Tested on pine64.
Signed-off-by: default avatarJagan Teki <jagan@amarulasolutions.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 2bd6bf03
...@@ -61,13 +61,6 @@ aliases { ...@@ -61,13 +61,6 @@ aliases {
chosen { chosen {
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
}; };
&ehci0 { &ehci0 {
...@@ -91,7 +84,7 @@ &i2c1_pins { ...@@ -91,7 +84,7 @@ &i2c1_pins {
&mmc0 { &mmc0 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>; pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>; vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted; cd-inverted;
disable-wp; disable-wp;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment