Commit 3f75dadd authored by Hal Rosenstock's avatar Hal Rosenstock Committed by Linus Torvalds

[PATCH] IB: User MAD ABI changes to support RMPP

User MAD ABI changes to support RMPP
Signed-off-by: default avatarHal Rosenstock <halr@voltaire.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent a977049d
......@@ -28,13 +28,37 @@ Creating MAD agents
Receiving MADs
MADs are received using read(). The buffer passed to read() must be
large enough to hold at least one struct ib_user_mad. For example:
struct ib_user_mad mad;
ret = read(fd, &mad, sizeof mad);
if (ret != sizeof mad)
MADs are received using read(). The receive side now supports
RMPP. The buffer passed to read() must be at least one
struct ib_user_mad + 256 bytes. For example:
If the buffer passed is not large enough to hold the received
MAD (RMPP), the errno is set to ENOSPC and the length of the
buffer needed is set in mad.length.
Example for normal MAD (non RMPP) reads:
struct ib_user_mad *mad;
mad = malloc(sizeof *mad + 256);
ret = read(fd, mad, sizeof *mad + 256);
if (ret != sizeof mad + 256) {
perror("read");
free(mad);
}
Example for RMPP reads:
struct ib_user_mad *mad;
mad = malloc(sizeof *mad + 256);
ret = read(fd, mad, sizeof *mad + 256);
if (ret == -ENOSPC)) {
length = mad.length;
free(mad);
mad = malloc(sizeof *mad + length);
ret = read(fd, mad, sizeof *mad + length);
}
if (ret < 0) {
perror("read");
free(mad);
}
In addition to the actual MAD contents, the other struct ib_user_mad
fields will be filled in with information on the received MAD. For
......@@ -50,18 +74,21 @@ Sending MADs
MADs are sent using write(). The agent ID for sending should be
filled into the id field of the MAD, the destination LID should be
filled into the lid field, and so on. For example:
filled into the lid field, and so on. The send side does support
RMPP so arbitrary length MAD can be sent. For example:
struct ib_user_mad *mad;
struct ib_user_mad mad;
mad = malloc(sizeof *mad + mad_length);
/* fill in mad.data */
/* fill in mad->data */
mad.id = my_agent; /* req.id from agent registration */
mad.lid = my_dest; /* in network byte order... */
mad->hdr.id = my_agent; /* req.id from agent registration */
mad->hdr.lid = my_dest; /* in network byte order... */
/* etc. */
ret = write(fd, &mad, sizeof mad);
if (ret != sizeof mad)
ret = write(fd, &mad, sizeof *mad + mad_length);
if (ret != sizeof *mad + mad_length)
perror("write");
Setting IsSM Capability Bit
......
/*
* Copyright (c) 2004 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Voltaire, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
......@@ -29,7 +30,7 @@
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* $Id: ib_user_mad.h 1389 2004-12-27 22:56:47Z roland $
* $Id: ib_user_mad.h 2814 2005-07-06 19:14:09Z halr $
*/
#ifndef IB_USER_MAD_H
......@@ -42,7 +43,7 @@
* Increment this value if any changes that break userspace ABI
* compatibility are made.
*/
#define IB_USER_MAD_ABI_VERSION 2
#define IB_USER_MAD_ABI_VERSION 5
/*
* Make sure that all structs defined in this file remain laid out so
......@@ -51,13 +52,13 @@
*/
/**
* ib_user_mad - MAD packet
* @data - Contents of MAD
* ib_user_mad_hdr - MAD packet header
* @id - ID of agent MAD received with/to be sent with
* @status - 0 on successful receive, ETIMEDOUT if no response
* received (transaction ID in data[] will be set to TID of original
* request) (ignored on send)
* @timeout_ms - Milliseconds to wait for response (unset on receive)
* @retries - Number of automatic retries to attempt
* @qpn - Remote QP number received from/to be sent to
* @qkey - Remote Q_Key to be sent with (unset on receive)
* @lid - Remote lid received from/to be sent to
......@@ -72,11 +73,12 @@
*
* All multi-byte quantities are stored in network (big endian) byte order.
*/
struct ib_user_mad {
__u8 data[256];
struct ib_user_mad_hdr {
__u32 id;
__u32 status;
__u32 timeout_ms;
__u32 retries;
__u32 length;
__u32 qpn;
__u32 qkey;
__u16 lid;
......@@ -90,6 +92,17 @@ struct ib_user_mad {
__u32 flow_label;
};
/**
* ib_user_mad - MAD packet
* @hdr - MAD packet header
* @data - Contents of MAD
*
*/
struct ib_user_mad {
struct ib_user_mad_hdr hdr;
__u8 data[0];
};
/**
* ib_user_mad_reg_req - MAD registration request
* @id - Set by the kernel; used to identify agent in future requests.
......@@ -103,6 +116,8 @@ struct ib_user_mad {
* management class to receive.
* @oui: Indicates IEEE OUI when mgmt_class is a vendor class
* in the range from 0x30 to 0x4f. Otherwise not used.
* @rmpp_version: If set, indicates the RMPP version used.
*
*/
struct ib_user_mad_reg_req {
__u32 id;
......@@ -111,6 +126,7 @@ struct ib_user_mad_reg_req {
__u8 mgmt_class;
__u8 mgmt_class_version;
__u8 oui[3];
__u8 rmpp_version;
};
#define IB_IOCTL_MAGIC 0x1b
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment