drivers: clk: Add ZynqMP clock driver

This patch adds CCF compliant clock driver for ZynqMP.
Clock driver queries supported clock information from
firmware and regiters pll and output clocks with CCF.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Tejas Patel <tejasp@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Acked-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

drivers/clk/Kconfig

@@ -299,5 +299,6 @@ source "drivers/clk/sunxi-ng/Kconfig"
 source "drivers/clk/tegra/Kconfig"
 source "drivers/clk/ti/Kconfig"
 source "drivers/clk/uniphier/Kconfig"
+source "drivers/clk/zynqmp/Kconfig"
 
 endmenu

drivers/clk/Makefile

@@ -108,3 +108,4 @@ obj-$(CONFIG_X86)			+= x86/
 endif
 obj-$(CONFIG_ARCH_ZX)			+= zte/
 obj-$(CONFIG_ARCH_ZYNQ)			+= zynq/
+obj-$(CONFIG_COMMON_CLK_ZYNQMP)         += zynqmp/

drivers/clk/zynqmp/Kconfig

+# SPDX-License-Identifier: GPL-2.0
+
+config COMMON_CLK_ZYNQMP
+	bool "Support for Xilinx ZynqMP Ultrascale+ clock controllers"
+	depends on ARCH_ZYNQMP || COMPILE_TEST
+	depends on ZYNQMP_FIRMWARE
+	help
+	  Support for the Zynqmp Ultrascale clock controller.
+	  It has a dependency on the PMU firmware.
+	  Say Y if you want to include clock support.

drivers/clk/zynqmp/Makefile

+# SPDX-License-Identifier: GPL-2.0
+# Zynq Ultrascale+ MPSoC clock specific Makefile
+
+obj-$(CONFIG_ARCH_ZYNQMP)	+= pll.o clk-gate-zynqmp.o divider.o clk-mux-zynqmp.o clkc.o

drivers/clk/zynqmp/clk-gate-zynqmp.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC clock controller
+ *
+ *  Copyright (C) 2016-2018 Xilinx
+ *
+ * Gated clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include "clk-zynqmp.h"
+
+/**
+ * struct clk_gate - gating clock
+ * @hw:		handle between common and hardware-specific interfaces
+ * @flags:	hardware-specific flags
+ * @clk_id:	Id of clock
+ */
+struct zynqmp_clk_gate {
+	struct clk_hw hw;
+	u8 flags;
+	u32 clk_id;
+};
+
+#define to_zynqmp_clk_gate(_hw) container_of(_hw, struct zynqmp_clk_gate, hw)
+
+/**
+ * zynqmp_clk_gate_enable() - Enable clock
+ * @hw:		handle between common and hardware-specific interfaces
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_clk_gate_enable(struct clk_hw *hw)
+{
+	struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw);
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 clk_id = gate->clk_id;
+	int ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	ret = eemi_ops->clock_enable(clk_id);
+
+	if (ret)
+		pr_warn_once("%s() clock enabled failed for %s, ret = %d\n",
+			     __func__, clk_name, ret);
+
+	return ret;
+}
+
+/*
+ * zynqmp_clk_gate_disable() - Disable clock
+ * @hw:		handle between common and hardware-specific interfaces
+ */
+static void zynqmp_clk_gate_disable(struct clk_hw *hw)
+{
+	struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw);
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 clk_id = gate->clk_id;
+	int ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	ret = eemi_ops->clock_disable(clk_id);
+
+	if (ret)
+		pr_warn_once("%s() clock disable failed for %s, ret = %d\n",
+			     __func__, clk_name, ret);
+}
+
+/**
+ * zynqmp_clk_gate_is_enable() - Check clock state
+ * @hw:		handle between common and hardware-specific interfaces
+ *
+ * Return: 1 if enabled, 0 if disabled else error code
+ */
+static int zynqmp_clk_gate_is_enabled(struct clk_hw *hw)
+{
+	struct zynqmp_clk_gate *gate = to_zynqmp_clk_gate(hw);
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 clk_id = gate->clk_id;
+	int state, ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	ret = eemi_ops->clock_getstate(clk_id, &state);
+	if (ret) {
+		pr_warn_once("%s() clock get state failed for %s, ret = %d\n",
+			     __func__, clk_name, ret);
+		return -EIO;
+	}
+
+	return state ? 1 : 0;
+}
+
+static const struct clk_ops zynqmp_clk_gate_ops = {
+	.enable = zynqmp_clk_gate_enable,
+	.disable = zynqmp_clk_gate_disable,
+	.is_enabled = zynqmp_clk_gate_is_enabled,
+};
+
+/**
+ * zynqmp_clk_register_gate() - Register a gate clock with the clock framework
+ * @name:		Name of this clock
+ * @clk_id:		Id of this clock
+ * @parents:		Name of this clock's parents
+ * @num_parents:	Number of parents
+ * @nodes:		Clock topology node
+ *
+ * Return: clock hardware of the registered clock gate
+ */
+struct clk_hw *zynqmp_clk_register_gate(const char *name, u32 clk_id,
+					const char * const *parents,
+					u8 num_parents,
+					const struct clock_topology *nodes)
+{
+	struct zynqmp_clk_gate *gate;
+	struct clk_hw *hw;
+	int ret;
+	struct clk_init_data init;
+
+	/* allocate the gate */
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &zynqmp_clk_gate_ops;
+	init.flags = nodes->flag;
+	init.parent_names = parents;
+	init.num_parents = 1;
+
+	/* struct clk_gate assignments */
+	gate->flags = nodes->type_flag;
+	gate->hw.init = &init;
+	gate->clk_id = clk_id;
+
+	hw = &gate->hw;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(gate);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}

drivers/clk/zynqmp/clk-mux-zynqmp.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC mux
+ *
+ *  Copyright (C) 2016-2018 Xilinx
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include "clk-zynqmp.h"
+
+/*
+ * DOC: basic adjustable multiplexer clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is only affected by parent switching.  No clk_set_rate support
+ * parent - parent is adjustable through clk_set_parent
+ */
+
+/**
+ * struct zynqmp_clk_mux - multiplexer clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @flags:	hardware-specific flags
+ * @clk_id:	Id of clock
+ */
+struct zynqmp_clk_mux {
+	struct clk_hw hw;
+	u8 flags;
+	u32 clk_id;
+};
+
+#define to_zynqmp_clk_mux(_hw) container_of(_hw, struct zynqmp_clk_mux, hw)
+
+/**
+ * zynqmp_clk_mux_get_parent() - Get parent of clock
+ * @hw:		handle between common and hardware-specific interfaces
+ *
+ * Return: Parent index
+ */
+static u8 zynqmp_clk_mux_get_parent(struct clk_hw *hw)
+{
+	struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw);
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 clk_id = mux->clk_id;
+	u32 val;
+	int ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	ret = eemi_ops->clock_getparent(clk_id, &val);
+
+	if (ret)
+		pr_warn_once("%s() getparent failed for clock: %s, ret = %d\n",
+			     __func__, clk_name, ret);
+
+	return val;
+}
+
+/**
+ * zynqmp_clk_mux_set_parent() - Set parent of clock
+ * @hw:		handle between common and hardware-specific interfaces
+ * @index:	Parent index
+ *
+ * Return: 0 on success else error+reason
+ */
+static int zynqmp_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct zynqmp_clk_mux *mux = to_zynqmp_clk_mux(hw);
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 clk_id = mux->clk_id;
+	int ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	ret = eemi_ops->clock_setparent(clk_id, index);
+
+	if (ret)
+		pr_warn_once("%s() set parent failed for clock: %s, ret = %d\n",
+			     __func__, clk_name, ret);
+
+	return ret;
+}
+
+static const struct clk_ops zynqmp_clk_mux_ops = {
+	.get_parent = zynqmp_clk_mux_get_parent,
+	.set_parent = zynqmp_clk_mux_set_parent,
+	.determine_rate = __clk_mux_determine_rate,
+};
+
+static const struct clk_ops zynqmp_clk_mux_ro_ops = {
+	.get_parent = zynqmp_clk_mux_get_parent,
+};
+
+/**
+ * zynqmp_clk_register_mux() - Register a mux table with the clock
+ *			       framework
+ * @name:		Name of this clock
+ * @clk_id:		Id of this clock
+ * @parents:		Name of this clock's parents
+ * @num_parents:	Number of parents
+ * @nodes:		Clock topology node
+ *
+ * Return: clock hardware of the registered clock mux
+ */
+struct clk_hw *zynqmp_clk_register_mux(const char *name, u32 clk_id,
+				       const char * const *parents,
+				       u8 num_parents,
+				       const struct clock_topology *nodes)
+{
+	struct zynqmp_clk_mux *mux;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret;
+
+	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	if (nodes->type_flag & CLK_MUX_READ_ONLY)
+		init.ops = &zynqmp_clk_mux_ro_ops;
+	else
+		init.ops = &zynqmp_clk_mux_ops;
+	init.flags = nodes->flag;
+	init.parent_names = parents;
+	init.num_parents = num_parents;
+	mux->flags = nodes->type_flag;
+	mux->hw.init = &init;
+	mux->clk_id = clk_id;
+
+	hw = &mux->hw;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(hw);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+EXPORT_SYMBOL_GPL(zynqmp_clk_register_mux);

drivers/clk/zynqmp/clk-zynqmp.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 2016-2018 Xilinx
+ */
+
+#ifndef __LINUX_CLK_ZYNQMP_H_
+#define __LINUX_CLK_ZYNQMP_H_
+
+#include <linux/spinlock.h>
+
+#include <linux/firmware/xlnx-zynqmp.h>
+
+/* Clock APIs payload parameters */
+#define CLK_GET_NAME_RESP_LEN				16
+#define CLK_GET_TOPOLOGY_RESP_WORDS			3
+#define CLK_GET_PARENTS_RESP_WORDS			3
+#define CLK_GET_ATTR_RESP_WORDS				1
+
+enum topology_type {
+	TYPE_INVALID,
+	TYPE_MUX,
+	TYPE_PLL,
+	TYPE_FIXEDFACTOR,
+	TYPE_DIV1,
+	TYPE_DIV2,
+	TYPE_GATE,
+};
+
+/**
+ * struct clock_topology - Clock topology
+ * @type:	Type of topology
+ * @flag:	Topology flags
+ * @type_flag:	Topology type specific flag
+ */
+struct clock_topology {
+	u32 type;
+	u32 flag;
+	u32 type_flag;
+};
+
+struct clk_hw *zynqmp_clk_register_pll(const char *name, u32 clk_id,
+				       const char * const *parents,
+				       u8 num_parents,
+				       const struct clock_topology *nodes);
+
+struct clk_hw *zynqmp_clk_register_gate(const char *name, u32 clk_id,
+					const char * const *parents,
+					u8 num_parents,
+					const struct clock_topology *nodes);
+
+struct clk_hw *zynqmp_clk_register_divider(const char *name,
+					   u32 clk_id,
+					   const char * const *parents,
+					   u8 num_parents,
+					   const struct clock_topology *nodes);
+
+struct clk_hw *zynqmp_clk_register_mux(const char *name, u32 clk_id,
+				       const char * const *parents,
+				       u8 num_parents,
+				       const struct clock_topology *nodes);
+
+struct clk_hw *zynqmp_clk_register_fixed_factor(const char *name,
+					u32 clk_id,
+					const char * const *parents,
+					u8 num_parents,
+					const struct clock_topology *nodes);
+
+#endif

drivers/clk/zynqmp/divider.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC Divider support
+ *
+ *  Copyright (C) 2016-2018 Xilinx
+ *
+ * Adjustable divider clock implementation
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include "clk-zynqmp.h"
+
+/*
+ * DOC: basic adjustable divider clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable.  clk->rate = ceiling(parent->rate / divisor)
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+#define to_zynqmp_clk_divider(_hw)		\
+	container_of(_hw, struct zynqmp_clk_divider, hw)
+
+#define CLK_FRAC	BIT(13) /* has a fractional parent */
+
+/**
+ * struct zynqmp_clk_divider - adjustable divider clock
+ * @hw:		handle between common and hardware-specific interfaces
+ * @flags:	Hardware specific flags
+ * @clk_id:	Id of clock
+ * @div_type:	divisor type (TYPE_DIV1 or TYPE_DIV2)
+ */
+struct zynqmp_clk_divider {
+	struct clk_hw hw;
+	u8 flags;
+	u32 clk_id;
+	u32 div_type;
+};
+
+static inline int zynqmp_divider_get_val(unsigned long parent_rate,
+					 unsigned long rate)
+{
+	return DIV_ROUND_CLOSEST(parent_rate, rate);
+}
+
+/**
+ * zynqmp_clk_divider_recalc_rate() - Recalc rate of divider clock
+ * @hw:			handle between common and hardware-specific interfaces
+ * @parent_rate:	rate of parent clock
+ *
+ * Return: 0 on success else error+reason
+ */
+static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw,
+						    unsigned long parent_rate)
+{
+	struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw);
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 clk_id = divider->clk_id;
+	u32 div_type = divider->div_type;
+	u32 div, value;
+	int ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	ret = eemi_ops->clock_getdivider(clk_id, &div);
+
+	if (ret)
+		pr_warn_once("%s() get divider failed for %s, ret = %d\n",
+			     __func__, clk_name, ret);
+
+	if (div_type == TYPE_DIV1)
+		value = div & 0xFFFF;
+	else
+		value = div >> 16;
+
+	return DIV_ROUND_UP_ULL(parent_rate, value);
+}
+
+/**
+ * zynqmp_clk_divider_round_rate() - Round rate of divider clock
+ * @hw:			handle between common and hardware-specific interfaces
+ * @rate:		rate of clock to be set
+ * @prate:		rate of parent clock
+ *
+ * Return: 0 on success else error+reason
+ */
+static long zynqmp_clk_divider_round_rate(struct clk_hw *hw,
+					  unsigned long rate,
+					  unsigned long *prate)
+{
+	struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw);
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 clk_id = divider->clk_id;
+	u32 div_type = divider->div_type;
+	u32 bestdiv;
+	int ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	/* if read only, just return current value */
+	if (divider->flags & CLK_DIVIDER_READ_ONLY) {
+		ret = eemi_ops->clock_getdivider(clk_id, &bestdiv);
+
+		if (ret)
+			pr_warn_once("%s() get divider failed for %s, ret = %d\n",
+				     __func__, clk_name, ret);
+		if (div_type == TYPE_DIV1)
+			bestdiv = bestdiv & 0xFFFF;
+		else
+			bestdiv  = bestdiv >> 16;
+
+		return DIV_ROUND_UP_ULL((u64)*prate, bestdiv);
+	}
+
+	bestdiv = zynqmp_divider_get_val(*prate, rate);
+
+	if ((clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) &&
+	    (divider->flags & CLK_FRAC))
+		bestdiv = rate % *prate ? 1 : bestdiv;
+	*prate = rate * bestdiv;
+
+	return rate;
+}
+
+/**
+ * zynqmp_clk_divider_set_rate() - Set rate of divider clock
+ * @hw:			handle between common and hardware-specific interfaces
+ * @rate:		rate of clock to be set
+ * @parent_rate:	rate of parent clock
+ *
+ * Return: 0 on success else error+reason
+ */
+static int zynqmp_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+				       unsigned long parent_rate)
+{
+	struct zynqmp_clk_divider *divider = to_zynqmp_clk_divider(hw);
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 clk_id = divider->clk_id;
+	u32 div_type = divider->div_type;
+	u32 value, div;
+	int ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	value = zynqmp_divider_get_val(parent_rate, rate);
+	if (div_type == TYPE_DIV1) {
+		div = value & 0xFFFF;
+		div |= 0xffff << 16;
+	} else {
+		div = 0xffff;
+		div |= value << 16;
+	}
+
+	ret = eemi_ops->clock_setdivider(clk_id, div);
+
+	if (ret)
+		pr_warn_once("%s() set divider failed for %s, ret = %d\n",
+			     __func__, clk_name, ret);
+
+	return ret;
+}
+
+static const struct clk_ops zynqmp_clk_divider_ops = {
+	.recalc_rate = zynqmp_clk_divider_recalc_rate,
+	.round_rate = zynqmp_clk_divider_round_rate,
+	.set_rate = zynqmp_clk_divider_set_rate,
+};
+
+/**
+ * zynqmp_clk_register_divider() - Register a divider clock
+ * @name:		Name of this clock
+ * @clk_id:		Id of clock
+ * @parents:		Name of this clock's parents
+ * @num_parents:	Number of parents
+ * @nodes:		Clock topology node
+ *
+ * Return: clock hardware to registered clock divider
+ */
+struct clk_hw *zynqmp_clk_register_divider(const char *name,
+					   u32 clk_id,
+					   const char * const *parents,
+					   u8 num_parents,
+					   const struct clock_topology *nodes)
+{
+	struct zynqmp_clk_divider *div;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret;
+
+	/* allocate the divider */
+	div = kzalloc(sizeof(*div), GFP_KERNEL);
+	if (!div)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &zynqmp_clk_divider_ops;
+	init.flags = nodes->flag;
+	init.parent_names = parents;
+	init.num_parents = 1;
+
+	/* struct clk_divider assignments */
+	div->flags = nodes->type_flag;
+	div->hw.init = &init;
+	div->clk_id = clk_id;
+	div->div_type = nodes->type;
+
+	hw = &div->hw;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(div);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+EXPORT_SYMBOL_GPL(zynqmp_clk_register_divider);

drivers/clk/zynqmp/pll.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Zynq UltraScale+ MPSoC PLL driver
+ *
+ *  Copyright (C) 2016-2018 Xilinx
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include "clk-zynqmp.h"
+
+/**
+ * struct zynqmp_pll - PLL clock
+ * @hw:		Handle between common and hardware-specific interfaces
+ * @clk_id:	PLL clock ID
+ */
+struct zynqmp_pll {
+	struct clk_hw hw;
+	u32 clk_id;
+};
+
+#define to_zynqmp_pll(_hw)	container_of(_hw, struct zynqmp_pll, hw)
+
+#define PLL_FBDIV_MIN	25
+#define PLL_FBDIV_MAX	125
+
+#define PS_PLL_VCO_MIN 1500000000
+#define PS_PLL_VCO_MAX 3000000000UL
+
+enum pll_mode {
+	PLL_MODE_INT,
+	PLL_MODE_FRAC,
+};
+
+#define FRAC_OFFSET 0x8
+#define PLLFCFG_FRAC_EN	BIT(31)
+#define FRAC_DIV  BIT(16)  /* 2^16 */
+
+/**
+ * zynqmp_pll_get_mode() - Get mode of PLL
+ * @hw:		Handle between common and hardware-specific interfaces
+ *
+ * Return: Mode of PLL
+ */
+static inline enum pll_mode zynqmp_pll_get_mode(struct clk_hw *hw)
+{
+	struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+	u32 clk_id = clk->clk_id;
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	ret = eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_MODE, clk_id, 0,
+			      ret_payload);
+	if (ret)
+		pr_warn_once("%s() PLL get frac mode failed for %s, ret = %d\n",
+			     __func__, clk_name, ret);
+
+	return ret_payload[1];
+}
+
+/**
+ * zynqmp_pll_set_mode() - Set the PLL mode
+ * @hw:		Handle between common and hardware-specific interfaces
+ * @on:		Flag to determine the mode
+ */
+static inline void zynqmp_pll_set_mode(struct clk_hw *hw, bool on)
+{
+	struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+	u32 clk_id = clk->clk_id;
+	const char *clk_name = clk_hw_get_name(hw);
+	int ret;
+	u32 mode;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	if (on)
+		mode = PLL_MODE_FRAC;
+	else
+		mode = PLL_MODE_INT;
+
+	ret = eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_MODE, clk_id, mode, NULL);
+	if (ret)
+		pr_warn_once("%s() PLL set frac mode failed for %s, ret = %d\n",
+			     __func__, clk_name, ret);
+}
+
+/**
+ * zynqmp_pll_round_rate() - Round a clock frequency
+ * @hw:		Handle between common and hardware-specific interfaces
+ * @rate:	Desired clock frequency
+ * @prate:	Clock frequency of parent clock
+ *
+ * Return: Frequency closest to @rate the hardware can generate
+ */
+static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long *prate)
+{
+	u32 fbdiv;
+	long rate_div, f;
+
+	/* Enable the fractional mode if needed */
+	rate_div = (rate * FRAC_DIV) / *prate;
+	f = rate_div % FRAC_DIV;
+	zynqmp_pll_set_mode(hw, !!f);
+
+	if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
+		if (rate > PS_PLL_VCO_MAX) {
+			fbdiv = rate / PS_PLL_VCO_MAX;
+			rate = rate / (fbdiv + 1);
+		}
+		if (rate < PS_PLL_VCO_MIN) {
+			fbdiv = DIV_ROUND_UP(PS_PLL_VCO_MIN, rate);
+			rate = rate * fbdiv;
+		}
+		return rate;
+	}
+
+	fbdiv = DIV_ROUND_CLOSEST(rate, *prate);
+	fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX);
+	return *prate * fbdiv;
+}
+
+/**
+ * zynqmp_pll_recalc_rate() - Recalculate clock frequency
+ * @hw:			Handle between common and hardware-specific interfaces
+ * @parent_rate:	Clock frequency of parent clock
+ *
+ * Return: Current clock frequency
+ */
+static unsigned long zynqmp_pll_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+	u32 clk_id = clk->clk_id;
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 fbdiv, data;
+	unsigned long rate, frac;
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	ret = eemi_ops->clock_getdivider(clk_id, &fbdiv);
+	if (ret)
+		pr_warn_once("%s() get divider failed for %s, ret = %d\n",
+			     __func__, clk_name, ret);
+
+	rate =  parent_rate * fbdiv;
+	if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
+		eemi_ops->ioctl(0, IOCTL_GET_PLL_FRAC_DATA, clk_id, 0,
+				ret_payload);
+		data = ret_payload[1];
+		frac = (parent_rate * data) / FRAC_DIV;
+		rate = rate + frac;
+	}
+
+	return rate;
+}
+
+/**
+ * zynqmp_pll_set_rate() - Set rate of PLL
+ * @hw:			Handle between common and hardware-specific interfaces
+ * @rate:		Frequency of clock to be set
+ * @parent_rate:	Clock frequency of parent clock
+ *
+ * Set PLL divider to set desired rate.
+ *
+ * Returns:            rate which is set on success else error code
+ */
+static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+	u32 clk_id = clk->clk_id;
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 fbdiv;
+	long rate_div, frac, m, f;
+	int ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) {
+		rate_div = (rate * FRAC_DIV) / parent_rate;
+		m = rate_div / FRAC_DIV;
+		f = rate_div % FRAC_DIV;
+		m = clamp_t(u32, m, (PLL_FBDIV_MIN), (PLL_FBDIV_MAX));
+		rate = parent_rate * m;
+		frac = (parent_rate * f) / FRAC_DIV;
+
+		ret = eemi_ops->clock_setdivider(clk_id, m);
+		if (ret)
+			pr_warn_once("%s() set divider failed for %s, ret = %d\n",
+				     __func__, clk_name, ret);
+
+		eemi_ops->ioctl(0, IOCTL_SET_PLL_FRAC_DATA, clk_id, f, NULL);
+
+		return rate + frac;
+	}
+
+	fbdiv = DIV_ROUND_CLOSEST(rate, parent_rate);
+	fbdiv = clamp_t(u32, fbdiv, PLL_FBDIV_MIN, PLL_FBDIV_MAX);
+	ret = eemi_ops->clock_setdivider(clk_id, fbdiv);
+	if (ret)
+		pr_warn_once("%s() set divider failed for %s, ret = %d\n",
+			     __func__, clk_name, ret);
+
+	return parent_rate * fbdiv;
+}
+
+/**
+ * zynqmp_pll_is_enabled() - Check if a clock is enabled
+ * @hw:		Handle between common and hardware-specific interfaces
+ *
+ * Return: 1 if the clock is enabled, 0 otherwise
+ */
+static int zynqmp_pll_is_enabled(struct clk_hw *hw)
+{
+	struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 clk_id = clk->clk_id;
+	unsigned int state;
+	int ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	ret = eemi_ops->clock_getstate(clk_id, &state);
+	if (ret) {
+		pr_warn_once("%s() clock get state failed for %s, ret = %d\n",
+			     __func__, clk_name, ret);
+		return -EIO;
+	}
+
+	return state ? 1 : 0;
+}
+
+/**
+ * zynqmp_pll_enable() - Enable clock
+ * @hw:		Handle between common and hardware-specific interfaces
+ *
+ * Return: 0 on success else error code
+ */
+static int zynqmp_pll_enable(struct clk_hw *hw)
+{
+	struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 clk_id = clk->clk_id;
+	int ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	if (zynqmp_pll_is_enabled(hw))
+		return 0;
+
+	ret = eemi_ops->clock_enable(clk_id);
+	if (ret)
+		pr_warn_once("%s() clock enable failed for %s, ret = %d\n",
+			     __func__, clk_name, ret);
+
+	return ret;
+}
+
+/**
+ * zynqmp_pll_disable() - Disable clock
+ * @hw:		Handle between common and hardware-specific interfaces
+ */
+static void zynqmp_pll_disable(struct clk_hw *hw)
+{
+	struct zynqmp_pll *clk = to_zynqmp_pll(hw);
+	const char *clk_name = clk_hw_get_name(hw);
+	u32 clk_id = clk->clk_id;
+	int ret;
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+	if (!zynqmp_pll_is_enabled(hw))
+		return;
+
+	ret = eemi_ops->clock_disable(clk_id);
+	if (ret)
+		pr_warn_once("%s() clock disable failed for %s, ret = %d\n",
+			     __func__, clk_name, ret);
+}
+
+static const struct clk_ops zynqmp_pll_ops = {
+	.enable = zynqmp_pll_enable,
+	.disable = zynqmp_pll_disable,
+	.is_enabled = zynqmp_pll_is_enabled,
+	.round_rate = zynqmp_pll_round_rate,
+	.recalc_rate = zynqmp_pll_recalc_rate,
+	.set_rate = zynqmp_pll_set_rate,
+};
+
+/**
+ * zynqmp_clk_register_pll() - Register PLL with the clock framework
+ * @name:		PLL name
+ * @clk_id:		Clock ID
+ * @parents:		Name of this clock's parents
+ * @num_parents:	Number of parents
+ * @nodes:		Clock topology node
+ *
+ * Return: clock hardware to the registered clock
+ */
+struct clk_hw *zynqmp_clk_register_pll(const char *name, u32 clk_id,
+				       const char * const *parents,
+				       u8 num_parents,
+				       const struct clock_topology *nodes)
+{
+	struct zynqmp_pll *pll;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret;
+
+	init.name = name;
+	init.ops = &zynqmp_pll_ops;
+	init.flags = nodes->flag;
+	init.parent_names = parents;
+	init.num_parents = 1;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	pll->hw.init = &init;
+	pll->clk_id = clk_id;
+
+	hw = &pll->hw;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(pll);
+		return ERR_PTR(ret);
+	}
+
+	clk_hw_set_rate_range(hw, PS_PLL_VCO_MIN, PS_PLL_VCO_MAX);
+	if (ret < 0)
+		pr_err("%s:ERROR clk_set_rate_range failed %d\n", name, ret);
+
+	return hw;
+}

include/linux/firmware/xlnx-zynqmp.h

@@ -72,6 +72,7 @@ enum pm_query_id {
 	PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS,
 	PM_QID_CLOCK_GET_PARENTS,
 	PM_QID_CLOCK_GET_ATTRIBUTES,
+	PM_QID_CLOCK_GET_NUM_CLOCKS = 12,
 };
 
 /**