Commit 40519d54 authored by Akinobu Mita's avatar Akinobu Mita Committed by Mauro Carvalho Chehab

media: ov772x: use generic names for reset and powerdown gpios

The ov772x driver uses "rstb-gpios" and "pwdn-gpios" for reset and
powerdown pins.  However, using generic names for these gpios is
preferred.  ("reset-gpios" and "powerdown-gpios" respectively)

There is only one mainline user for these gpios, so rename to generic
names.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: default avatarJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent 4b610d6d
......@@ -351,8 +351,9 @@ static struct platform_device migor_ceu_device = {
static struct gpiod_lookup_table ov7725_gpios = {
.dev_id = "0-0021",
.table = {
GPIO_LOOKUP("sh7722_pfc", GPIO_PTT0, "pwdn", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "rstb", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("sh7722_pfc", GPIO_PTT0, "powerdown",
GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "reset", GPIO_ACTIVE_LOW),
},
};
......
......@@ -837,10 +837,10 @@ static int ov772x_power_on(struct ov772x_priv *priv)
* available to handle this cleanly, request the GPIO temporarily
* to avoid conflicts.
*/
priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb",
priv->rstb_gpio = gpiod_get_optional(&client->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(priv->rstb_gpio)) {
dev_info(&client->dev, "Unable to get GPIO \"rstb\"");
dev_info(&client->dev, "Unable to get GPIO \"reset\"");
return PTR_ERR(priv->rstb_gpio);
}
......@@ -1307,10 +1307,10 @@ static int ov772x_probe(struct i2c_client *client,
goto error_ctrl_free;
}
priv->pwdn_gpio = gpiod_get_optional(&client->dev, "pwdn",
priv->pwdn_gpio = gpiod_get_optional(&client->dev, "powerdown",
GPIOD_OUT_LOW);
if (IS_ERR(priv->pwdn_gpio)) {
dev_info(&client->dev, "Unable to get GPIO \"pwdn\"");
dev_info(&client->dev, "Unable to get GPIO \"powerdown\"");
ret = PTR_ERR(priv->pwdn_gpio);
goto error_clk_put;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment