Commit 4061c061 authored by Jeff Garzik's avatar Jeff Garzik Committed by Linus Torvalds

Add Promise SX8 (carmel) block driver.

parent 4d92fbee
......@@ -2046,6 +2046,21 @@ Your cooperation is appreciated.
1 = /dev/gpib1 Second GPIB bus
...
160 block Carmel 8-port SATA Disks on First Controller
0 = /dev/carmel/0 SATA disk 0 whole disk
1 = /dev/carmel/0p1 SATA disk 0 partition 1
...
31 = /dev/carmel/0p31 SATA disk 0 partition 31
32 = /dev/carmel/1 SATA disk 1 whole disk
64 = /dev/carmel/2 SATA disk 2 whole disk
...
224 = /dev/carmel/7 SATA disk 7 whole disk
Partitions are handled in the same way as for IDE
disks (see major number 3) except that the limit on
partitions is 31.
161 char IrCOMM devices (IrDA serial/parallel emulation)
0 = /dev/ircomm0 First IrCOMM device
1 = /dev/ircomm1 Second IrCOMM device
......@@ -2054,6 +2069,21 @@ Your cooperation is appreciated.
17 = /dev/irlpt1 Second IrLPT device
...
161 block Carmel 8-port SATA Disks on Second Controller
0 = /dev/carmel/8 SATA disk 8 whole disk
1 = /dev/carmel/8p1 SATA disk 8 partition 1
...
31 = /dev/carmel/8p31 SATA disk 8 partition 31
32 = /dev/carmel/9 SATA disk 9 whole disk
64 = /dev/carmel/10 SATA disk 10 whole disk
...
224 = /dev/carmel/15 SATA disk 15 whole disk
Partitions are handled in the same way as for IDE
disks (see major number 3) except that the limit on
partitions is 31.
162 char Raw block device interface
0 = /dev/rawctl Raw I/O control device
1 = /dev/raw/raw1 First raw I/O device
......
......@@ -292,6 +292,15 @@ config BLK_DEV_NBD
If unsure, say N.
config BLK_DEV_CARMEL
tristate "Promise SATA SX8 (carmel) support"
depends on PCI
---help---
Saying Y or M here will enable support for the
Promise SATA SX8 ("carmel") controllers.
Use devices /dev/carmel/$N and /dev/carmel/$Np$M.
config BLK_DEV_RAM
tristate "RAM disk support"
---help---
......
......@@ -40,3 +40,5 @@ obj-$(CONFIG_BLK_DEV_NBD) += nbd.o
obj-$(CONFIG_BLK_DEV_CRYPTOLOOP) += cryptoloop.o
obj-$(CONFIG_VIODASD) += viodasd.o
obj-$(CONFIG_BLK_DEV_CARMEL) += carmel.o
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment