Commit 4073f942 authored by Sylwester Nawrocki's avatar Sylwester Nawrocki Committed by Mauro Carvalho Chehab

[media] ARM: S5PV210: Remove camera support from mach-goni.c

S5PV210 is going to get DT support, so we can remove the camera
bits from the only board using camera on S5PV210. This allows to
clean the exynos4-is driver by dropping code for non-dt platforms.
This patch can be dropped if a patch removing the whole board
file is applied first.
Signed-off-by: default avatarSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Acked-by: default avatarKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
parent 404a90ab
......@@ -49,11 +49,6 @@
#include <plat/clock.h>
#include <plat/samsung-time.h>
#include <plat/mfc.h>
#include <plat/camport.h>
#include <media/v4l2-mediabus.h>
#include <media/s5p_fimc.h>
#include <media/noon010pc30.h>
#include "common.h"
......@@ -285,14 +280,6 @@ static void __init goni_tsp_init(void)
/* USB OTG */
static struct s3c_hsotg_plat goni_hsotg_pdata;
static void goni_camera_init(void)
{
s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
/* Set max driver strength on CAM_A_CLKOUT pin. */
s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
}
/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
......@@ -825,34 +812,6 @@ static void goni_setup_sdhci(void)
s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
};
static struct noon010pc30_platform_data noon010pc30_pldata = {
.clk_rate = 16000000UL,
.gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */
.gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */
};
static struct i2c_board_info noon010pc30_board_info = {
I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
.platform_data = &noon010pc30_pldata,
};
static struct fimc_source_info goni_camera_sensors[] = {
{
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
.board_info = &noon010pc30_board_info,
.i2c_bus_num = 0,
.clk_frequency = 16000000UL,
},
};
static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
.source_info = goni_camera_sensors,
.num_clients = ARRAY_SIZE(goni_camera_sensors),
};
/* Audio device */
static struct platform_device goni_device_audio = {
.name = "smdk-audio",
......@@ -874,10 +833,6 @@ static struct platform_device *goni_devices[] __initdata = {
&s5p_device_mixer,
&s5p_device_sdo,
&s3c_device_i2c0,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc_md,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
......@@ -946,14 +901,8 @@ static void __init goni_machine_init(void)
/* FB */
s3c_fb_set_platdata(&goni_lcd_pdata);
/* FIMC */
s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
&s5p_device_fimc_md);
s3c_hsotg_set_platdata(&goni_hsotg_pdata);
goni_camera_init();
/* SPI */
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment