iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer

This patch adds basic support for Analog Devices ADXL372 SPI-Bus
Three-Axis Digital Accelerometer.

The device is probed and configured the with some initial default
values. With this basic driver, it is possible to read raw acceleration
data.

Datasheet:
http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL372.pdfSigned-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS

@@ -543,6 +543,12 @@ W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
 F:	drivers/input/misc/adxl34x.c
 
+ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
+M:	Stefan Popa <stefan.popa@analog.com>
+W:	http://ez.analog.com/community/linux-device-drivers
+S:	Supported
+F:	drivers/iio/accel/adxl372.c
+
 AF9013 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org

drivers/iio/accel/Kconfig

@@ -60,6 +60,17 @@ config ADXL345_SPI
 	  will be called adxl345_spi and you will also get adxl345_core
 	  for the core module.
 
+config ADXL372
+	tristate "Analog Devices ADXL372 3-Axis Accelerometer Driver"
+	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to add support for the Analog Devices ADXL372 triaxial
+	  acceleration sensor.
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl372.
+
 config BMA180
 	tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
 	depends on I2C

drivers/iio/accel/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_ADIS16209) += adis16209.o
 obj-$(CONFIG_ADXL345) += adxl345_core.o
 obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
 obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
+obj-$(CONFIG_ADXL372) += adxl372.o
 obj-$(CONFIG_BMA180) += bma180.o
 obj-$(CONFIG_BMA220) += bma220_spi.o
 obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o