Commit 41124fa6 authored by Andrew Lunn's avatar Andrew Lunn Committed by David S. Miller

net: ethernet: Add helper to remove a supported link mode

Some MAC hardware cannot support a subset of link modes. e.g. often
1Gbps Full duplex is supported, but Half duplex is not. Add a helper
to remove such a link mode.
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 04b7d41d
......@@ -895,9 +895,9 @@ int xgene_enet_phy_connect(struct net_device *ndev)
}
pdata->phy_speed = SPEED_UNKNOWN;
phy_dev->supported &= ~SUPPORTED_10baseT_Half &
~SUPPORTED_100baseT_Half &
~SUPPORTED_1000baseT_Half;
phy_remove_link_mode(phy_dev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
phy_remove_link_mode(phy_dev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
phy_remove_link_mode(phy_dev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
phy_dev->supported |= SUPPORTED_Pause |
SUPPORTED_Asym_Pause;
phy_dev->advertising = phy_dev->supported;
......
......@@ -549,9 +549,8 @@ static int macb_mii_probe(struct net_device *dev)
phy_set_max_speed(phydev, SPEED_100);
if (bp->caps & MACB_CAPS_NO_GIGABIT_HALF)
phydev->supported &= ~SUPPORTED_1000baseT_Half;
phydev->advertising = phydev->supported;
phy_remove_link_mode(phydev,
ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
bp->link = 0;
bp->speed = 0;
......
......@@ -1947,7 +1947,8 @@ static int fec_enet_mii_probe(struct net_device *ndev)
/* mask with MAC supported features */
if (fep->quirks & FEC_QUIRK_HAS_GBIT) {
phy_set_max_speed(phy_dev, 1000);
phy_dev->supported &= ~SUPPORTED_1000baseT_Half;
phy_remove_link_mode(phy_dev,
ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
#if !defined(CONFIG_M5272)
phy_dev->supported |= SUPPORTED_Pause;
#endif
......
......@@ -1013,7 +1013,7 @@ static int lan743x_phy_open(struct lan743x_adapter *adapter)
goto return_error;
/* MAC doesn't support 1000T Half */
phydev->supported &= ~SUPPORTED_1000baseT_Half;
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
/* support both flow controls */
phy->fc_request_control = (FLOW_CTRL_RX | FLOW_CTRL_TX);
......
......@@ -1074,7 +1074,8 @@ static int ravb_phy_init(struct net_device *ndev)
}
/* 10BASE is not supported */
phydev->supported &= ~PHY_10BT_FEATURES;
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Full_BIT);
phy_attached_info(phydev);
......
......@@ -993,10 +993,14 @@ static int stmmac_init_phy(struct net_device *dev)
* Half-duplex mode not supported with multiqueue
* half-duplex can only works with single queue
*/
if (tx_cnt > 1)
phydev->supported &= ~(SUPPORTED_1000baseT_Half |
SUPPORTED_100baseT_Half |
SUPPORTED_10baseT_Half);
if (tx_cnt > 1) {
phy_remove_link_mode(phydev,
ETHTOOL_LINK_MODE_10baseT_Half_BIT);
phy_remove_link_mode(phydev,
ETHTOOL_LINK_MODE_100baseT_Half_BIT);
phy_remove_link_mode(phydev,
ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
}
/*
* Broken HW is sometimes missing the pull-up resistor on the
......
......@@ -1765,6 +1765,24 @@ int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
}
EXPORT_SYMBOL(phy_set_max_speed);
/**
* phy_remove_link_mode - Remove a supported link mode
* @phydev: phy_device structure to remove link mode from
* @link_mode: Link mode to be removed
*
* Description: Some MACs don't support all link modes which the PHY
* does. e.g. a 1G MAC often does not support 1000Half. Add a helper
* to remove a link mode.
*/
void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode)
{
WARN_ON(link_mode > 31);
phydev->supported &= ~BIT(link_mode);
phydev->advertising = phydev->supported;
}
EXPORT_SYMBOL(phy_remove_link_mode);
static void of_set_phy_supported(struct phy_device *phydev)
{
struct device_node *node = phydev->mdio.dev.of_node;
......
......@@ -2166,7 +2166,7 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
}
/* MAC doesn't support 1000T Half */
phydev->supported &= ~SUPPORTED_1000baseT_Half;
phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
/* support both flow controls */
dev->fc_request_control = (FLOW_CTRL_RX | FLOW_CTRL_TX);
......
......@@ -1049,6 +1049,7 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
int phy_start_interrupts(struct phy_device *phydev);
void phy_print_status(struct phy_device *phydev);
int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode);
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *));
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment